DREAMS 413-00146 User manual

COLORADO BUNK BED
Assembly Instructions Date: 09-10-2008
413-00146
Do not throw away any of the packing or the instruction book until you have checked all the
components and fittings and the furniture is fully assembled.
In the unlikely event that this product has missing or damaged parts, please call 0870 3333 612 to
obtain spares.
Minimum No. of people
recommended to assemble
this product:
Approx assembly time:
2
2
hours
12
/
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE
Page 1 of 8
2030mm
Colorado bunk bed
1035.5mm
780mm
693mm

Components parts and fittings contained in the box
Please sort out all parts before you begin to assemble the item. This to make sure you always use the correct part.
Fittings
Parts
Hazard Warning !
Keep small components out of the reach of children.
A29 pcs. Dowel - Ø10 x 40mm
305 / 0003
Page 2 of 8 Colorado bunk bed
C1 pc. Allen key 4mm
309 / 0002
B22 pcs. Barrel nut - M6 x 13mm
303 / 0004
D22 pcs. Bolt - M6 x 110mm
304 / 0060
E4 pcs. Dowel - Ø12 x 60mm
305 / 0018
F8 pcs. Screw - Ø3.5 x 35mm
318 / 0001
G60 pcs. Screw - Ø3.5 x 25mm
318 / 0002
H7 pcs. Screw - Ø7 x 50mm
308 / 0001
I6 pcs. Screw - Ø4 x 50mm
302 / 0035
Headboard lower
2 pcs.
219 / 1007
1007 x 780mm
1
1007 x 693mm
Headboard
upper, left
1 pc.
219 / 1005
2
Headboard
upper, right
1 pc.
219 / 1006
3
Side rail
4 pcs.
114 / 0256
4
1900 x 110mm
Side panel, upper,
long
1 pc.
114 / 1016
5
1900 x 90mm
Side panel, upper,
short
1 pc.
114 / 1017
61508 x 90mm
Side panel, lower,
long
1 pc.
114 / 9016
71900 x 65mm
Side panel, lower,
short
1 pc.
114 / 9017
8
1508 x 65mm
Slats
26 pcs.
114 / 0194
9
916 x 65mm
Slats, with cut
4 pcs.
114 / 0203
10
916 x 65mm
Distance brick
1 pc.
105 / 0102
11
68 x 68mm
Side left, ladder
1 pc.
220 / 1003
12
1158 x 50mm
Side right, ladder
1 pc.
220 / 9003
13
880 x 50mm
3 pcs.
220 / 0014
14
303 x 44mm
Step
ladder
1007 x 693mm

Key diagram and tools needed.
Key diagram.
Tools needed.
2
1
3
4
4
4
4
4
5
67
8
910
9
10
1
12
13
14
Step 1
Knock the dowels "A" into
the holes indicated on the
side rails "4" and the side
panels "5", "6", "7" and
"8".
4
5
7
68
15
A
x 4
A
A
A
AAA
A
A
A
x 3
Page 3 of 8 Colorado bunk bed

Assembly
Step 2
Press the side "12" and
"13" onto the steps "14" as
indicated.
Fix the sides using screws
"I" into the holes indicated.
Step 3
Fix the side rails "4" and
the side panels "5" and "7"
to the headboard "2" and
the side rails "4" to the
headboard "1" using bolts
"D" and the barrel nuts "B"
as shown.
Tighten the bolts using the
allen key "C".
12
13
14
14
14
I
I
I
I
I
I
57
4
4
2
4
4
1
B
B
B
B
B
B
D
D
D
D
D
D
Page 4 of 8 Colorado bunk bed
B
B
B

Assembly
Step 4
Fix the headboard "3" onto
the side rails "4" and the
side panels "5" and "7"
and the side rails "4" to the
remaining headboard "1"
using bolts "D" and barrel
nuts "B" as shown.
Tighten the bolts using the
allen key "C".
5
7
2
4
4
4
4
1
3
1
B
D
D
D
D
D
D
B
B
B
Step 5 10
9
10
10
10
9x 13
x 13
Place the slats "9"
and "10" onto the
slatholders.
Use the distance
brick "11" to secure
the correct distance
between the slats.
Fix the slats using
the screws "G".
11
G
G
G
G
G
G
G
G
G
G
G
G
G
Page 5 of 8 Colorado bunk bed
B
B
B

Assembly
Step 6
Knock the dowels "E" into
the holes indicated on the
headboards "1".
Place the upper bed as
shown.
Step 7
Secure the assembly
using screws "F" into the
holes indicated.
3
2
1
1
EE
E
E
F
FF
FF
Page 6 of 8 Colorado bunk bed

Assembly
Step 8
Fix the ladder onto the
side rails "4" using screws
"H".
Tighten the screws using
the allen key "I"
Step 9
Place the side panels "6"
and "8" onto the
headboard "2" and the
ladder and fix them onto
the ladder using screws
"H".
Finally fix the side panels
onto the headboard using
the barrel nuts "B" and the
bolts "D".
4
4
H
H
HH
B
H
H
H
B
D
D
D
6
8
Note !
The top of
the mattress
MUST NOT
exceed this
marking.
(Max. high
177mm)
Page 7 of 8 Colorado bunk bed

Assembly
Please note that the product you have purchased is a natural living timber.
Just like nature itself, wood varies in shape and colour. Knots, vein patterns, resin pockets and colour
differences contribute to giving the piece of furniture its beauty and form a natural part of solid wood.
Although the tree has been cut down and dried, it is still alive and therefore will react to high and low
temperatures, light, humidity, drought and time.
In cold and dry periods, the wood contracts which may lead to small cracks in the piece of furniture. The
reverse happens in warm and humid periods where the wood expands and this may result in slight
unevenness.
The colour of the wood also changes with time, particularly if the furniture is place in a light place. This is
natural process and part of owning a piece of furniture made of solid wood.
Any flexing that has occurred during transport will re-correct it self once this product is correctly
assembled.
Tighten all joins of furniture after six months. Please keep these instructions in a safe place for future use.
Dear customer.
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE
This product complies with BS EN 747 - 1 : 2007 & BS EN 747 - 2 : 2007
The top surface of the mattress must not be above the line marked on the frame.
(Max. high 177mm).The size of mattress should be : 920 x 1900 mm
Do not allow children under 6 years old to use the upper bunk.
Be aware of the danger of young children (under 6) falling from the upper bunk.
Bed should not be used if any structural part is broken or missing.
Children can strangle in items such as ropes, string, cords, harnesses and belts attached to or hung on a
bunk bed / high bed.
Children can become trapped between the bed and the wall. To avoid risk of serious injury the distance
between the top safety barrier and the wall shall not exceed 75mm or shall be more than 230mm.
Always ensure that the guardrails, ladder and other components are maintained in the proper position and
are free from damage, and that all the fixing screws are tight.
Always use the ladder for entering and leaving the upper bunk.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Use a nightlight as an added safety precaution for persons using the upper bunk.
Use guardrails on both long sides of the upper bunk.
Page 8 of 8 Colorado bunk bed