Drive Medical 548 User manual

mimi lite deluxe
aluminum rollator
www.drivemedical.com
lifetime limited
warranty
© 2006 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington N.Y. 11050 USA Made in China
lifetime limited
warranty
Procedure For Obtaining Warranty Services
1. In the event of a defect covered by this warranty, we will, at
our option, repair or replace the device. This warranty does
not cover device failure due to owner misuse or negligence,
or normal wear and tear. The warranty does not extend to
non-durable components, such as rubber accessories, casters,
and grips, which are subject to normal wear and need periodic
replacement. If you have a question about your Drive device
or this warranty, please contact an authorized Drive dealer.
2. The complete (entire) Walker must be presented (returned)
for inspection and evaluation. If the product is found to have
defective materials or workmanship, the remedy will be limited
to replacement or repair of the part needed to correct the
problem. There will be no charge for the replaced or repaired
materials.
3. Walkers which have been serviced under this warranty
protection, will be returned to the owner at no additional cost
for freight or delivery.
4. Warranty does not include any labor charges which may be
incurred in the replacement or repair of parts or their instal-
lation. Freight or delivery charges to the location where such
warranty services will be performed will be at the owners
expense.
5. All Winnie Walker products are identified by a Lot Number
at the time of manufacture. Removal or defacing the Lot
Number may void the warranty.
For Service, in or out of warranty, complete the following
information now for ready reference in the event correspon-
dence becomes necessary. It is also required that you attach
a copy of the Bill of Sale, should you be requested to show
proof of purchase.
Dealers Name:
Address:
Phone No.:
Walker Lot No.:
Warranty Period
1. Your Drive brand product has lifetime protection against
defective materials and workmanship covering the frame of
the walker.
One (1) Year protection against defective materials or work-
manship on all other components, assemblies and parts.
Limitations and Exclusions
Products which have been subject to negligence, abuse,
improper storage or handling, improper operation, unauthor-
ized modifications or damages beyond the reasonable control
of Drive Products, are not covered by this warranty.
Parts or materials which are subject to normal wear resulting
from the use of these products and which must be replaced/
repaired due to such normal wear, are the owners responsibility
and are not covered by this Warranty.
This Warranty is exclusive and in lieu of all other express
warranties, implied warranty, including but not limited to the
implied warranty of merchantability and fitness for a particu-
lar purpose, and shall not extend beyond the duration of the
express warranty provided herein. Drive Medical Design &
Manufacturing shall not be liable for any consequential or inci-
dental damages whatsoever.
This Warranty gives you specific legal rights which may vary
from state to state. Some states do not allow the exclusions
or limitations of incidental or consequential damages, or how
long an implied warranty lasts, so the exclusions and limitation
may not apply to you.
EU Authorized Representative
Drive International, LLC
Globe Lane - Stockport
DUKINFIELD SK16 4RE, GB

mimi lite deluxe
The Mimi Lite Deluxe provides offers lightweight advantages
and the added security of a locking loop brake. The easy
folding and lightweight features combine to make this a great
travel Rollator.
548
Shown
- (2) handlebar
- (2) height adjustment knobs with bolts
- (1) basket.
parts
Please read these instructions before assembly or use of this
Rollator. This Rollator must always be assembled and fitted for
the user by a qualified Drive Medical Authorized dealer. Before
using your new Rollator please ensure that your weight is with-
in the weight capacity of this unit. This Rollator will require
very little assembly and the assembly can be
completed without tools.
1. Open your Rollator. Push the folding hinge until straight to
secure the unit in the proper position.
2. Place a handle bar with the pre-assembled loop Lock in each
handle bar receptacle and adjust to the desired height.
3. Use the height adjustment knobs and bolts to secure the
handle bars in this position being cautious to ensure that the
bolt heads are properly mounted within the hex opening on
the inside of each handle bar receptacle.
4. Test and adjust the Loop Lock mechanism tension to ensure
proper and secure Locking before use.
5. If your Rollator comes with a basket, mount the basket in the
proper location.
assembly instructions
folding
This unit is easily folded from the user’s side of the unit by
grasping the folding strap (black cloth strap) located under the
hinged seat and lifting the unit by this strap. The unit will fold
as lifting for easy storage and transport. The basket also is
easily removed by a firm tug to pull the basket free of its
frame clamps.
loop lock
This new generation loop lock handle has been designed to
offer maximum comfort and safety. Two functions are incorpo-
rated: a normal loop lock and a parking loop lock. Those
functions are fully separated, to avoid misunderstandings.
Contact areas are wide, to limit pressure on the fingers.
Normal loop lock function may be applied, while walking with
the Rollator, e.g. as a help to make a corner, or as a help to get
up or off the side walk. Activating the Locks is performed by
pulling the loop lock handle up, similar to
operating the brakes of a bicycle.
The parking loop lock will be applied at standstill. When the
user wants to sit down on the seat, the parking loop lock must
be applied first, for safety reasons. If the user has to reach
away from the Rollator, e.g. for taking something from the self
in a shop, it will be safe to apply the parking loop lock first
The way of activating the parking loop lock is by pushing the
handle down. This way is convenient for people who cannot
easily pinch the handle, because of certain disabilities of their
hands. Releasing the parking loop lock can be done by moving
the handle up. For operation the parking loop lock, the loop
lock handle is provided with a wider section at the end.
The Rollator loop lock handle has been designed for operating
the loop locks of a Rollator or walker and incorporates two
functions: operating of normal loop lock and operating the
parking loop lock. Normal loop lock will be used during walk-
ing, e.g. as help to make a corner. The parking loop lock func-
tion will be used at a standstill, e.g. to keep the Rollator at its
place, when using the seat to sit down.
Characteristics of the loop lock handle are:
1) Normal loop lock function
2) Parking loop lock function
3) Operation of the normal loop lock and operation of
parking loop lock are fully separated, to
avoid misunderstandings.
operation
Normal loop lock is activated by pulling the handle up,
similar to operating the brakes of a bicycle. Once the handle is
released, the lock will release as well.
-Activate the parking loop lock by pushing the handle DOWN.
At the bottom position - the handle will lock automatically and
the parking loop lock is ON.
-Release the parking loop lock by pulling the handle UP.
The handle will return to its basic position; the parking loop
lock is OFF.
NORMALLOOPLOCK
Keep the loop lock handle free from dirt etc. to keep it
operating properly. In case the loop locks are lockng too little,
the cable might be too loose. The cable can be adjusted by
means of the adjuster screw, located where the cable is
connected to the loop lock handle. If the loop lock cable wire
is broken, it has to be replaced.
maintenance
CAUTIONDon’t use the loop lock handle for other functions
than locking a Rollator or walker. Take care that the loop lock
handle is in good condition, fully assembled (no loose parts)
and fixed, for safety reasons.
Please read all cautions and warning labels before using this
Rollator.
This unit is designed to be used as a mobility aid, creating
a natural gate as the user walks securely with their primary
weight distribution between the handlebars with the unit in
front of the user.
If the Rollator has a seat, always engage the locking mecha-
nism on the loop lock before using the seat. At no time can this
unit be used to transport individuals while seated for risk of
bodily injury.
cautions
PARKINGLOOPLOCK