DT Research DT311H Assembly instructions

Rugged Tablet
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2019, DT Research, Inc. All Rights Reserved. BOG1008 DT311C/ DT311H ENG
INTRODUCTION
Thank you for acquiring the latest addion to DT Research’s line of tablets — the
DT311C/ DT311H. Featuring a slim yet robust enclosure, the DT311C/ DT311H with
11.6” TFT display is powered by the Intel® processor, oering opmal combinaons
of performance and power savings. The DT311C/ DT311H is available with Micro-
so® Windows® operang systems. Each soware operang system features web
browser, client/ server compung soware, media player, accessories, and applica-
ons support.
PACKAGE CONTENTS
• One DT311C/ DT311H with Baery Pack and Handstrap
• AC-DC Power Adapter with Power Cord
• Basic Operaon Guide
DT311C/ DT311H
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in
a residenal installaon. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Cauon: Any changes or modicaons not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in
conjuncon with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
* If your DT311C/ DT311H contains camera, MSR or barcode scanner, please refer to
the Tablet Modules Basic Operaon Guide for detailed operaon.

2 3
PRECAUTIONS
• Always exercise care when operang and handling the DT311C/ DT311H
• Do NOT apply excessive pressure to the display screen.
• We recommend using the Digital Pen (oponal) to keep the screen clean.
• Avoid prolonged exposure of the display panel to any strong heat source.
Wherever possible, the DT311C/ DT311H should face away from direct light to
reduce glare.
• If the AC-DC power adapter is used to recharge or power the tablet, do NOT use
any AC-DC adapter other than the one provided or acquired from the manufac-
turer or its partners.
• In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power o the DT311C/ DT311H and disconnect all power sources.
Report the problem to your device provider immediately.
• Never aempt to disassemble the DT311C/ DT311H, as this will void the
warranty.
BASIC FEATURES
The DT311C/ DT311H wireless tablet integrates a bright display, one USB port, and
embedded networking elements such as wireless LAN and Bluetooth or oponal
mobile broadband. The DT311C/ DT311His complemented by a suite of accessories,
including baery expansion, charging cradles, and baery charger kit, for a
comprehensive user experience.
A DT311C/ DT311H typically integrates an 802.11ac wireless LAN (WLAN) adapter
that may connect to other wireless devices or access points. If your DT311C/ DT311H
does not come with such a network adapter, please consult your device provider to
establish the desired network connecvity.
Power/Battery LED Status:
• Blue indicates the baery is 25% to 100% charged
• Blinking blue indicates the baery is charging
• Orange indicates that the baery is between 11% to 25%
• Blinking Orange indicates that the baery is below 10%
Baery/Power LED 2
4
3
1
E
D
A
C
B
Button Functions
BUTTON ACTION
Programmable Buon
Power Buon
Baery Latch *Push the switch up to unlock the latch, then slide the latch le to remove the baery.
RF Switch
Input/ Output Ports
USB 3.0 Port
Headphone Jack
DC Power Input
Smart Card Reader
Back Camera (oponal)
1
2
3
4
A
B
C
E
D

Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed aer a launch sequence of several seconds. The wireless
LAN connecon may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT311C/ DT311H may be congured using the ulies and methods dictated
by the soware operang system. The DT311C/ DT311H should be congurable
for various properes such as user proles, network features, and several system
elements.
Wireless Networking
Wireless LAN
The DT311C/ DT311H is oen delivered with an embedded (user-inaccessible)
802.11ac WLAN adapter equipped with a hidden custom antenna.
• Through the support of typical WLAN adapters, the DT311C/ DT311H should be
able to detect all 802.11 access points in the vicinity for you to select the access
point of your choice for connecon.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT311C/ DT311H
and the access points have to match. The SSID is case-sensive and it is recom-
mended that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves)
for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly congure
associated sengs such as Authencaon mode, etc.
• Refer to the access point operang manuals for seng up the 802.11 access
points.
Bluetooth
The Bluetooth conguraon applicaon is enabled from the System Tray or from the
Windows Mobility Center. Follow the instrucons and opons provided within the
applicaon to congure and invoke Bluetooth connecvity with the corresponding
peripherals.
OPERATION
Powering ON and OFF
To acvate the DT311C/ DT311H, push and quickly release the Power Buon. The
display will come on in a few seconds. To put the DT311C/ DT311H in Standby mode,
push and quickly release the Power Buon. To turn the DT311C/ DT311H o for
extended storage, power o safely using any soware funcon that “shuts down
computer” provided in the soware operang system.
NOTE:
The baery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT311C/ DT311H when seng up for the rst me
to fully charge the internal baery pack. You may charge the external baery
pack with it aached to the DT311C/ DT311H, or with the oponal external
baery charger kit.
NOTE:
When the baery pack is charging, the blue-colored Baery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity
and the LED stays dark, the baery pack(s) may have been drained substanally.
Try unplugging/ replugging the AC-DC adapter to the DT311C/ DT311H a few
mes to acvate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put the
tablet in “Standby” mode while not in use. Pushing briey on the same buon
will wake up the system within seconds.
NOTE:
Avoid using the Power Buon (“hold 4+ seconds” feature) to turn o the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operaon.
45

USING THE MOBILE TABLET
Peripherals Support
Through its USB port, the DT311C/ DT311H supports a wide range of USB-based
peripherals These peripherals are applicable for soware installaon, applicaons
storage, data storage, and system soware recovery and updates.
Remote Management
Depending on soware conguraon, the DT311C/ DT311H can be centrally
managed for asset monitoring and for soware control. Please consult your device
provider.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT
Research website.
If the DT311C/ DT311H comes with a mobile broadband module, please contact your
product and/or service provider for the SIM Card installaon procedures.
67
To Hold the Tablet
Le hand: grip the le back side of the tablet
with your le hand four index ngers, with
thumb resng on the top of the back side of the
tablet and palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index ngers, with
thumb resng on the top of the back side of the
tablet and palm securely against the back.
ENERGY STAR® Partner
As an ENERGY STAR® Partner, DT Research Inc. follows the EPA’s product
qualicaon and cercaon process to ensure the products marked with the
ENERGY STAR® logo are ENERGY STAR® qualied for energy eciency.
The ENERGY STAR® program specicaons for computers were to promote
energy eciency and reduce air polluon through more energy-ecient
equipment in homes, oces, and factories. One way products achieve this
goal is by using the Microso Windows power management feature to reduce
power consumpon when the product is not in use. The power management
feature enables the computer to iniate a low-power or “sleep” mode aer a
period of user inacvity.
To take advantage of these potenal energy savings, users should use the
default power management sengs that are provided with ENERGY STAR
qualied computers. The default power management sengs on ENERGY
STAR® qualied computers are preset to behave in the following ways :
Turn o display aer 10 minutes of user inacvity.
Iniate a low power sleep mode for the computer aer 30 minutes of user
inacvity.
Briey press the power buon will bring the computer out of sleep mode.
Addional informaon on the ENERGY STAR® program, its environmental
benets and the potenal energy and nancial savings of the power
management feature can be found on the EPA ENERGY STAR® Power
Management Web site at
hp://www.energystar.gov/powermanagement.