DT Research DT315BT Assembly instructions

DT315BT/ DT315BT-MD
ENGLISH
Mobile Tablet
BASIC OPERATION GUIDE
DT315BT/ DT315BT-MD
ENGLISH 8
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2016, DT Research, Inc. All Rights Reserved.
BOGW092116 DT315BT/ DT315BT-MD ENG
Federal Communicaon Commission Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instrucons, may
cause harmful interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television recepon,
which can be determined by turning the equipment offand on, the user is
encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separaon between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which•
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.•
FCC Cauon: Any changes or modificaons not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in
conjuncon with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
INTRODUCTION
Thank you for acquiring the latest addion to DT Research’s line of tablets —the
315BT/ DT315BT-MD. Featuring a slim yet robust enclosure, the two-pound 315BT/
DT315BT-MD with 9.7”TFT display is powered by the Intel® Celeron™ dual-core
processor, offering opmal combinaons of performance and power savings. The
DT315BT/ DT315BT-MD is available with Microso® Windows® operang systems. Each
soware operang system features web browser, client/ server compung soware,
media player, accessories, and applicaons support.
PACKAGE CONTENTS
One DT315BT/ DT315BT-MD with Internal Baery Pack, Handstrap and Grips•
AC-DC Power Adapter with Power Cord•
Basic Operaon Guide•
Major opons, depending on configuraon:
Desktop Charging Cradle with DC-in Power Jack, Ethernet and USB Ports•
External Baery Pack and Baery Charger Kit•
* If your DT315BT/ DT315BT-MD contains MSR, barcode scanner or camera module, please refer to
the Tablet Modules Basic Operaon Guide for detailed operaon.

DT315BT/ DT315BT-MD
ENGLISH 2
The DT315BT
The DT315BT-MD
Baery/Power LED
Baery/Power LED
Wireless LED
Wireless LED
1
1
2
3
3
2
B
B
A
A
D
D
C
C
Buon Funcons
BUTTON ACTION
As SAS buon without the scanner module
As scanner trigger when equipped with the scanner
module
Push/release typically enters Standby mode, or Push/
release exits Standby mode or restarts tablet (soware
dependent)
Push and hold (over 4 seconds) invokes hardware
shutdown
As SAS buon without the scanner module
As scanner trigger when equipped with the scanner
module
Input/ Output Ports
USB Port
Headphone Jack
SD Slot
DC Power Input
1
2
3
A
B
C
D
3ENGLISH
Power/Baery LED Status:
Blue indicates the baery is 25% to 100% charged•
Blinking blue indicates the baery is charging•
Orange indicates that the baery is between 11% to 25%•
Blinking Orange indicates that the baery is below 10%•
Precauons
Always exercise care when operang and handling the DT315BT/ DT315BT-MD.
•
Do NOT apply excessive pressure to the display screen.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
•
possible, the DT315BT/ DT315BT-MD should face away from direct light to reduce
glare.
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any
•
AC-DC adapter other than the one provided or acquired from the manufacturer or its
partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power offthe DT315BT/ DT315BT-MD and disconnect all power sources.
Report the problem to your device provider immediately.
Never aempt to disassemble the
•DT315BT/ DT315BT-MD, as this will void the
warranty.
THE DT315BT/ DT315BT-MD
Basic Features
The DT315BT/ DT315BT-MD wireless tablet integrates a bright and mul-touch
display, one USB port, and embedded networking elements such as wireless LAN and
Bluetooth or oponal 3G. The DT315BT/ DT315BT-MD is complemented by a suite of
accessories, including baery expansion, charging cradles, and baery charger kit, for a
comprehensive user experience.
A DT315BT/ DT315BT-MD typically integrates an 802.11ac wireless LAN (WLAN) adapter
that may connect to other wireless devices or access points. If your DT315BT/ DT315BT-
MD does not come with such a network adapter, please consult your device provider to
establish the desired network connecvity.

DT315BT/ DT315BT-MD
ENGLISH 4
OPERATION
Internal Baery
Warning! !
The Internal baery pack should only be replaced by an authorized DT Research service
representave. Please contact your product and/or service provider for internal baery
replacement service.
Powering ON and OFF
To acvate the DT315BT/ DT315BT-MD, push and quickly release the Power Buon. The
display will come on in a few seconds. To put the DT315BT/ DT315BT-MD in Standby
mode, push and quickly release the Power Buon. To turn the DT315BT/ DT315BT-MD
offfor extended storage, power offsafely using any soware funcon that “shuts down
computer”provided in the soware operang system.
NOTE:
The baery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT315BT/ DT315BT-MD when seng up for the first
me to fully charge the internal baery pack. You may charge the external baery
pack with it aached to the DT315BT/ DT315BT-MD, or with the oponal external
baery charger kit.
NOTE:
When the baery pack(s) is (are) charging, the blue-colored Baery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
acvity and the LED stays dark, the baery pack(s) may have been drained
substanally. Try unplugging/ replugging the AC-DC adapter to the DT315BT/
DT315BT-MD a few mes to acvate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put the
tablet in “Standby”mode while not in use. Pushing briefly on the same buon
will wake up the system within seconds.
NOTE:
Avoid using the Power Buon (“hold 4+ seconds”feature) to turn offthe
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operaon.
5ENGLISH
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed aer a launch sequence of several seconds. The wireless LAN
connecon may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT315BT/ DT315BT-MD may be configured using the ulies and methods dictated
by the soware operang system. The DT315BT/ DT315BT-MD should be configurable
for various properes such as user profiles, network features, and several system
elements.
Wireless Networking
Wireless LAN
The DT315BT/ DT315BT-MD is oen delivered with an embedded (user-inaccessible)
802.11ac WLAN adapter equipped with a hidden custom antenna.
Through the support of typical WLAN adapters, the DT315BT/ DT315BT-MD should•
be able to detect all 802.11 access points in the vicinity for you to select the access
point of your choice for connecon.
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT315BT/ DT315BT-•
MD and the access points have to match. The SSID is case-sensive and it is recom-
mended that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves)
for secure access.
When WEP/WPA/WPA2 is enabled, you may need to consult your network admin-•
istrator or your networking equipment literature to properly configure associated
sengs such as Authencaon mode, etc.
Refer to the access point operang manuals for seng up the 802.11 access points•.

DT315BT/ DT315BT-MD
ENGLISH 6
Bluetooth
The Bluetooth configuraon applicaon is enabled from the System Tray or from the
Windows Mobility Center. Follow the instrucons and opons provided within the
applicaon to configure and invoke Bluetooth connecvity with the corresponding
peripherals.
Desktop Cradle
The DT315BT/ DT315BT-MD is complemented by an oponal Desktop Cradle for
support, pass-through charging, and connecon to a range of USB peripherals, including
keyboard and mouse. The Cradle offers the following interfaces: a DC-in port for the
AC-DC adapter, an Ethernet port and USB ports. Always seat the DT315BT/ DT315BT-MD
securely onto the cradle. The cradle must be powered by the AC-DC adapter for the
Ethernet and USB ports to funcon. The baery packs on the DT315BT/ DT315BT-MD
may be recharged by connecng the AC-DC adapter directly to the DC-in port on the
DT315BT/ DT315BT-MD or through the DC-in port on the Desktop Cradle while the
DT315BT/ DT315BT-MD is docked to the Cradle.
USING THE Mobile Tablet
Peripherals Support
Through its USB port, the DT315BT/ DT315BT-MD supports a wide range of USB-based
peripherals. These peripherals are applicable for soware installaon, applicaons
storage, data storage, and system soware recovery and updates. The DT315BT/
DT315BT-MD is also compable with custom mountable cradle opons. These securable
and mountable cradles provide an interface to VESA mounts and arms, and to ports that
may include USB, Ethernet, and pass-through power.
Remote Management
Depending on soware configuraon, the DT315BT/ DT315BT-MD can be centrally
managed for asset monitoring and for soware control. Please consult your device
provider.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT Research
website.
If the DT315BT/ DT315BT-MD comes with a 3G module, please contact your product
and/or service provider for the SIM Card installaon procedures.
7ENGLISH
To Hold the Tablet
Lehand: grip the leback side of the tablet
with your lehand four index fingers, with thumb
resng on the top of the back side of the tablet
and palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index fingers, with
thumb resng on the top of the back side of the
tablet and palm securely against the back.