DT Research WebDT 312 Assembly instructions

ENGLISH
WebDT 312
ENGLISH 8
BASIC OPERATION GUIDE
WebDT 312
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com
Copyright © 2011, DT Research, Inc. All Rights Reserved.
DT Research and WebDT are registered trademarks of DT Research, Inc.
Mobile POS Tablet
INTRODUCTION
Thank you for acquiring the latest addion to
DT Research’s line of tablet devices—the WebDT 312.
Featuring a slim yet robust enclosure, the two-pound
WebDT 312 with 10.4”TFT display is powered by the Intel® Atom™ processor, offering
opmal combinaons of performance and power savings. An external baery expansion
opon provides approximately 3-4 hours of addional baery operaon for up to six
hours of mobile usage.
The WebDT 312 is available in Microso® Windows® Embedded Standard 7, Windows®
7 Professional, Windows® XP Embedded, Windows® XP Pro for Embedded Systems or
Linux operang systems. Each soware operang system features web browser, client/
server compung soware, media player, accessories, and applicaons support.
PACKAGE CONTENTS
One WebDT 312 with Internal Baery Pack (2200mAh), Stylus, Grips and Screen Cover•
AC-DC Power Adapter with Power Cord•
Basic Operaon Guide•
Major opons, depending on configuraon:
* If your WebDT 312 contains MSR, camera or scanner module, please refer to the POS module
operaon guide for detailed operaon.
BOG031811DT312ENG
Desktop Charging Cradle with DC-in Power Jack and•
Ethernet, USB and oponal VGA Ports External Baery Pack•
Internal High Capacity Baery (3760mAh)•External Baery Charger Kit•
SPECIFICATIONS
System
Processor Intel® Atom™ Z530, 1.6GHz
Memory (RAM) 1GB to 2GB DDR2 533MHZ
Storage 2GB to 16GB Internal Flash Module or 32GB to 128GB SSD
Operang Systems
Microso® Windows® Embedded Standard 7,
Windows® 7 Professional, Windows® XP Embedded,
Windows® XP Pro for Embedded Systems, or Linux
Display 10.4”LED-backlight screen with resisve touch;
outdoor-viewable opon
Display Resoluon 1024 x 768 (XGA)
Network Interface Wi-Fi 802.11a/b/g/n
Control Switch and Buons 1 power buon, 7 front buons and 1 trigger buon
Indicator 1 power/ baery status LED and 1 WLAN acve LED
Speaker Built-in speaker
Input/Output Ports 1 DC-in Jack; 2 USB 2.0 port;
1 Headphone-out Jack; 1 Microphone-in Jack
Security
WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-
Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit;
802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAPTLS,
EAP-TTLS
Power
AC/DC Adapter Input: 100 – 240V AC; Output: 12V DC, 3A
Baery Pack Internal 7.4V, 2200mAh or 7.4V, 3760mAh/
Oponal: External 7.2V, 3900mAh
Mechanical
Enclosure ABS + PC plascs and magnesium-aluminum alloy
Stylus Non-electronic p
Protecve Grip Rubber with handstrap
Dimensions (H x W x D) 8.3 x 10.3 x 0.8 in/ 210 x 261 x 18 mm
Weight 2.05 lbs/ 0.93 kg
Environmental
Regulatory FCC Class B, CE, C-Tick, RoHS compliant
Temperature Operaon: 0°C - 40°C; Storage: -20°C - 60°C
Humidity 0% - 90% non-condensing
* Specificaons subject to change without noce.

WebDT 312
ENGLISH 23ENGLISH
Buon Funcons (with Windows XP Operang System)
BUTTON ACTION
Programmable
Programmable, launch so(on-screen) keyboard (default)
Launch SAS (Secure Aenon Sequence)
Generate Ctrl+Alt+Del keys to invoke the security windows defined under Windows XP
Programmable,
Change display orientaon (portrait/ landscape) (default)
Programmable, system ulity menu (default)
Programmable,
As scanner trigger when equipped with the scanner module
Push/release typically enters Standby mode, or Push/release exits Standby mode or
restarts device (soware dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
Input/ Output Ports
DC Power Input
Headphone Jack
Microphone Jack
USB Ports (2)
The WebDT 312 (with Windows XP)
For locking the MSR module
Baery/Power LED
Wireless LED
Stylus
Baery and Power Meter
Calibraon
Buon Management
Wireless Network Sengs
Internal Baery Switch
(back panel)
Power/Baery LED Status:
Blue indicates the baery is 25% to 100% charged•
Blinking blue indicates the baery is charging•
Orange indicates that the baery is between 11% to 25%•
Blinking Orange indicates that the baery is below 10%•
Precauons
Always exercise care when operang and handling the WebDT 312.
•
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Stylus provided to keep the screen clean.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
•
possible, the WebDT 312 should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power the device, do NOT use any
•
AC-DC adapter other than the one provided with the device or acquired from the
manufacturer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power offthe WebDT 312 and disconnect all power sources. Report the
problem to your device provider immediately.
Never aempt to disassemble the WebDT 312, as this will void the warranty.
•
THE WebDT 312
Basic Features
The WebDT 312 wireless tablet integrates a bright and responsive touch display, two USB
ports, and embedded networking elements such as wireless LAN or oponal 3G. The
primary device is complemented by a suite of accessories, including baery expansion,
charging cradles, and baery charger kit, for a comprehensive user experience.
A WebDT 312 typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that
may connect to other wireless devices or access points. If your WebDT 312 does not
come with such a network adapter, please consult your device provider to establish the
desired network connecvity.
1
1
2
2
3
3
4
4
5
5
6
6
9B
D
8
C
A
A
B
C
D
8
9
7
7

WebDT 312
ENGLISH 45ENGLISH
OPERATION
Internal Baery Switch
To prevent baery drain during shipping and extended storage, the internal baery may
be disconnected off. To connect the internal baery, push the baery buon switch (on
the back panel) to the “up”posion (see page 2 for photo). The internal baery pack has
to be connected for it to operate, be charged, and for the oponal external baery pack
to funcon.
Powering ON and OFF
To acvate the WebDT 312, push and quickly release the Power Buon. The display will
come on in a few seconds. To put the WebDT 312 in Standby mode, push and quickly
release the Power Buon. To turn the WebDT 312 offfor extended storage, power off
the device safely using any soware funcon that “shuts down computer”provided in
the soware operang system.
NOTE: The baery packs shipped with your device may be low in power—please use
the AC-DC adapter with the WebDT 312 when seng up the device for the first me to
fully charge the internal baery pack. You may charge the external baery pack with it
aached to the WebDT 312, or with the oponal external baery charger kit.
NOTE: When the baery pack(s) is (are) charging, the blue-colored Baery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity
and the LED stays dark, the baery pack(s) may have been drained substanally. Try
unplugging/ replugging the AC-DC adapter to the WebDT 312 a few mes to acvate the
charging process.
NOTE: To conserve power, use (push and quick release) the Power Buon to put the
device in “Standby”mode while not in use. Pushing briefly on the same buon will wake
up the system within seconds.
NOTE: Avoid using the Power Buon (“hold 4+ seconds”feature) to turn offthe
device—this form of hardware shutdown is intended to be a means of recovery from
device lockups, and not as normal operaon.
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will
be displayed aer a launch sequence of several seconds. The wireless LAN connecon
may take 10-15 seconds to be established.
Configuring the WebDT 312
The device may be configured using the ulies and methods dictated by the soware
operang system. The WebDT 312 should be configurable for various properes such as
user profiles, network features, and several system elements.
Calibraon
The touch display for the WebDT 312 is calibrated before shipping. In the event that the
calibraon has been modified or is unsasfactory, the respecve calibraon rounes
(e.g., PenMount (PM) for Windows XP) to calibrate the touch interface may be used.
Such applicaons are typically executed through touch input via Stylus or through mouse
click via a USB mouse.
Wireless Networking
Wireless LAN
The WebDT 312 is oen delivered with an embedded (user-inaccessible) 802.11a/b/g/n
WLAN adapter equipped with a hidden custom antenna.
T
•hrough the support of typical WLAN adapters, the WebDT 312 should be able to
detect all 802.11 access points in the vicinity for you to select the access point of
your choice for connecon.
T
•he SSID and WEP/WPA/WPA2 (if enabled) parameters on the WebDT 312 and
the access points have to match. The SSID is case-sensive and it is recommended
that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure
access.
W
•hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
istrator or your networking equipment literature to properly configure associated
sengs such as Authencaon mode, etc.
R
•efer to the access point operang manuals for seng up the 802.11 access points.

WebDT 312
ENGLISH 67ENGLISH
Buon Management
Where supported by soware, many of the hard buons on the WebDT 312 are
programmable to perform a funcon of the user’s choice. The excepon is the Power
Buon and the SAS Buon. To acvate the buon re-assignment applicaon, invoke the
Buon Manager applicaon, e.g., in Windows XP Embedded .
Brightness Control
Where supported by device firmware and soware, a hard buon may be engaged to
manipulate the display brightness. Press the System Menu buon (Buon 7) on the front
of the WebDT 312. The System screen will display a Brightness control secon with up
and down arrows that can be acvated with the stylus.
Baery and Power Management
The WebDT 312 is equipped with an internal 2200mAh Li-Ion baery pack that is capable
of supporng approximately 1.5–2 hours of connuous operaon. With the oponal
internal 3760mAh baery and an external baery pack that clips (hot-pluggable)
onto the back of the device, the maximum period of connuous operaon will be
approximately 3–4 hours. The period between baery recharges can be significantly
lengthened by pung the device into Standby mode through the Power Buon (see
Buons Funcon Table) whenever the device is not in use. Depending on the operang
soware, the WebDT 312 may also be configured to enter various power-saving modes
via the Power Buon or through med entry.
Desktop Cradle
The WebDT 312 is complemented by an oponal Desktop Cradle for support, pass-
through charging, and connecon to a range of USB peripherals, including keyboard and
mouse. The Cradle offers the following interfaces: a DC-in port for the AC-DC adapter, an
Ethernet port, a VGA port (oponal) and USB ports. Always seat the WebDT 312 securely
onto the cradle. The cradle must be powered by the AC-DC adapter for the Ethernet
and USB ports to funcon. The baery packs on the WebDT 312 may be recharged by
connecng the AC-DC adapter directly to the DC-in port on the WebDT 312 or through
the DC-in port on the Desktop Cradle while the WebDT 312 is docked to the Cradle.
USING THE WebDT 312
Memory configuraon
The WebDT 312 is available with 1GB or 2GB memory configuraons. Storage opons
currently range from: 2GB to 16GB flash memory or 32GB to 128GB SSD.
Peripherals Support
Through its USB ports, the WebDT 312 supports a wide range of USB-based peripherals.
These peripherals are applicable for soware installaon, applicaons storage, data
storage, and system soware recovery and updates. The WebDT 312 is also compable
with custom mountable cradle opons. These securable and mountable cradles provide
an interface to VESA mounts and arms, and to ports that may include USB, Ethernet, and
pass-through power.
Remote Management
Depending on soware configuraon, the WebDT 312 can be centrally managed for
asset monitoring and for soware control. Please consult your device provider.
Federal Communicaon Commission Interference
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a residenal installaon. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instrucons, may cause harmful interference to radio
communicaons. However, there is no guarantee that interference will not occur in a
parcular installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment offand on, the
user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separaon between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the•
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.•
FCC Cauon: Any changes or modificaons not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in conjuncon with
any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.