DT Research DT317BT Assembly instructions

DT317BT
ENGLISH
Mobile Tablet
BASIC OPERATION GUIDE
DT317BT
ENGLISH 8
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2016, DT Research, Inc. All Rights Reserved.
BOG060816 DT317BT ENG
Federal Communicaon Commission Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instrucons, may
cause harmful interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television recepon,
which can be determined by turning the equipment offand on, the user is
encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separaon between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which•
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.•
FCC Cauon: Any changes or modificaons not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in
conjuncon with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
INTRODUCTION
Thank you for acquiring the latest addion to DT Research’s line of tablets —the
DT317BT. Featuring a slim yet robust enclosure, the DT317BT with 7”TFT display is
powered by the Intel® Atom™ quad-core processor, offering opmal combinaons of
performance and power savings. The DT317BT is available with Microso® Windows®
operang systems. Each soware operang system features web browser, client/ server
compung soware, media player, accessories, and applicaons support.
PACKAGE CONTENTS
One DT317BT with Baery Pack•
Capacive Touch Stylus•
AC-DC Power Adapter with Power Cord•
Basic Operaon Guide•
Major opons, depending on configuraon:
Desktop Charging Cradle with DC-in Power Jack•
External Baery Pack•
* If your DT317BT contains MSR, barcode scanner or RFID reader, please refer to the Tablet
Modules Basic Operaon Guide for detailed operaon.

DT317BT
ENGLISH 2
The DT317BT
Baery/Power LED
1
3
2
C
A
A
D
E
B
Buon Funcons
BUTTON ACTION
Power buon
As SAS buon without the scanner
module
As scanner trigger when equipped
with the scanner module
Baery switch
Input/ Output Ports
Barcode Scanner (oponal)
Magnec Stripe Reader (oponal)
Headphone Jack
USB Port
DC Power Input
1
2
3
A
B
C
D
E
3ENGLISH
Power/Baery LED Status:
Blue indicates the baery is 25% to 100% charged•
Blinking blue indicates the baery is charging•
Orange indicates that the baery is between 11% to 25%•
Blinking Orange indicates that the baery is below 10%•
Precauons
Always exercise care when operang and handling the DT317BT.
•
Do NOT apply excessive pressure to the display screen.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
•
possible, the DT317BT should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any
•
AC-DC adapter other than the one provided or acquired from the manufacturer or its
partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power offthe DT317BT and disconnect all power sources. Report the
problem to your device provider immediately.
Never aempt to disassemble the
•DT317BT, as this will void the warranty.
THE DT317BT
Basic Features
The DT317BT wireless tablet integrates a bright and mul-touch display, one USB port,
and embedded networking elements such as wireless LAN and Bluetooth. The DT317BT
is complemented by a suite of accessories, including baery expansion, and charging
cradles, for a comprehensive user experience.
A DT317BT typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT317BT does not come with
such a network adapter, please consult your device provider to establish the desired
network connecvity.

DT317BT
ENGLISH 4
OPERATION
Powering ON and OFF
To acvate the DT317BT, push and quickly release the Power Buon. The display will
come on in a few seconds. To put the DT317BT in Standby mode, push and quickly
release the Power Buon. To turn the DT317BT offfor extended storage, power off
safely using any soware funcon that “shuts down computer”provided in the soware
operang system.
NOTE:
The baery packs shipped with your tablet may be low in power—please use the
AC-DC adapter with the DT317BT when seng up for the first me to fully charge
the internal baery pack. You may charge the external baery pack with it aached
to the DT317BT, or with the oponal external baery charger kit.
NOTE:
When the baery pack is charging, the blue-colored Baery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
acvity and the LED stays dark, the baery pack(s) may have been drained
substanally. Try unplugging/ replugging the AC-DC adapter to the DT317BT a
few mes to acvate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put the
tablet in “Standby”mode while not in use. Pushing briefly on the same buon
will wake up the system within seconds.
NOTE:
Avoid using the Power Buon (“hold 4+ seconds”feature) to turn offthe
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operaon.
5ENGLISH
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed aer a launch sequence of several seconds. The wireless LAN
connecon may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT317BT may be configured using the ulies and methods dictated by the
soware operang system. The DT317BT should be configurable for various properes
such as user profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT317BT is oen delivered with an embedded (user-inaccessible) 802.11a/b/g/n
WLAN adapter equipped with a hidden custom antenna.
Through the support of typical WLAN adapters, the DT317BT should be able to•
detect all 802.11 access points in the vicinity for you to select the access point of
your choice for connecon.
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT317BT and the•
access points have to match. The SSID is case-sensive and it is recommended
that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure
access.
When WEP/WPA/WPA2 is enabled, you may need to consult your network admin-•
istrator or your networking equipment literature to properly configure associated
sengs such as Authencaon mode, etc.
Refer to the access point operang manuals for seng up the 802.11 access points•.

DT317BT
ENGLISH 6
Bluetooth
The Bluetooth configuraon applicaon is enabled from the System Tray or from the
Windows Mobility Center. Follow the instrucons and opons provided within the
applicaon to configure and invoke Bluetooth connecvity with the corresponding
peripherals.
Desktop Cradle
The DT317BT is complemented by an oponal Desktop Cradles for support, and
pass-through charging. Always seat the DT317BT securely onto the cradle. The baery
pack on the DT317BT may be recharged by connecng the AC-DC adapter directly to the
DC-in port on the DT317BT or through the DC-in port on the Desktop Cradle while the
DT317BT is docked in the Cradle.
USING THE Mobile Tablet
Peripherals Support
Through its USB port, the DT317BT supports a wide range of USB-based peripherals.
These peripherals are applicable for soware installaon, applicaons storage, data
storage, and system soware recovery and updates.
Remote Management
Depending on soware configuraon, the DT317BT can be centrally managed for asset
monitoring and for soware control. Please consult your device provider.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT Research
website.
7ENGLISH