DT Research DT340T Assembly instructions

Rugged Tablet
DT340T
ENGLISH 8
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2018, DT Research, Inc. All Rights Reserved. BOG071918DT340TENG
Federal Communicaon Commission Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instrucons, may
cause harmful interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television recepon,
which can be determined by turning the equipment offand on, the user is
encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separaon between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which•
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.•
FCC Cauon: Any changes or modificaons not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in conjuncon
with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
INTRODUCTION
Thank you for acquiring the latest addion to DT Research’s line of tablets —the DT340T.
Featuring a slim yet robust enclosure, the DT340T with a 14”TFT display is powered by
the Intel® processor, offering opmal combinaons of performance and power savings.
The DT340T is available with Microso® Windows® operang system. The soware
operang system features web browser, client/ server compung soware, media player,
accessories, and applicaons support.
PACKAGE CONTENTS
One•DT340T with Two Baery Packs
AC-DC Power Adapter with Power Cord•
Basic Operaon Guide•
Major opons, depending on configuraon:
Vehicle Mount Cradle with DC-in Power Jack, COM Ports, antenna connectors, and•
Ethernet and USB Ports
Docking Keyboard; connects automacally without switching and pairing,•
ideal for 2-in-1 applicaons
Baery Chargers•
Digital Pen•

Buon Funcons
BUTTON ACTION
Power Buon
Programmable Buons
Baery Latches •Push the switch to unlock the latch, then slide the latch to remove the baery.
Input/ Output Ports
Ethernet Port (RJ45)
USB 3.0 Port
HDMI Output
Audio jacks
DC-in
Smart Card Reader
Tabletop Stand
The DT340T
1
2
3
A
B
C
D
E
F
G
ENGLISH 2
Power LED Baery Indicator
3
3
F
E
A
C
G
D
B
3ENGLISH
Power/Baery LED Status:
Blue indicates the baery is 25% to 100% charged•
Blinking blue indicates the baery is charging•
Orange indicates that the baery is between 11% to 25%•
Blinking Orange indicates that the baery is below 10%•
Precauons
Always exercise care when operang and handling the
•DT340T.
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Digital Pen (oponal) to keep the screen clean.
•
A
•void prolonged exposure of the display panel to any strong heat source. Wherever
possible, the DT340T should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any
•
AC-DC adapter other than the one provided or acquired from the manufacturer or its
partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power offthe DT340T and disconnect all power sources. Report the
problem to your device provider immediately.
Never aempt to disassemble the
•DT340T, as this will void the warranty.
THE DT340T
Basic Features
The DT340T wireless tablet integrates a bright display, three USB ports, and embedded
networking elements such as wireless LAN and Bluetooth or oponal 4G. The DT340T is
complemented by a suite of accessories, including baery expansion, baery chargers,
vehicle mount cradle and docking keyboard for a comprehensive user experience.
A DT340T typically integrates an 802.11ac wireless LAN (WLAN) adapter that may connect
to other wireless devices or access points. If your DT340T does not come with such a
network adapter, please consult your device provider to establish the desired network
connecvity.
B
2
1

ENGLISH 4
OPERATION
Powering ON and OFF
To acvate the DT340T, push and quickly release the Power Buon. The display will come on
in a few seconds. To put the DT340T in Standby mode, push and quickly release the Power
Buon. To turn the DT340T offfor extended storage, power offsafely using any soware
funcon that “shuts down computer”provided in the soware operang system.
NOTE:
The baery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT340T when seng up for the first me to fully
charge the baery packs. You may charge the baery packs while aached to the
DT340T, or with the oponal external baery charger kit.
NOTE:
When the baery pack(s) is (are) charging, the blue-colored Baery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
acvity and the LED stays dark, the baery pack(s) may have been drained
substanally. Try unplugging/ replugging the AC-DC adapter to the DT340T a few
mes to acvate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put the
tablet in “Standby”mode while not in use. Pushing briefly on the same buon
will wake up the system within seconds.
NOTE:
Avoid using the Power Buon (“hold 4+ seconds”feature) to turn offthe
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operaon.
5ENGLISH
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate interface
will be displayed aer a launch sequence of several seconds. The wireless LAN connecon
may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT340T may be configured using the ulies and methods dictated by the soware
operang system. The DT340T should be configurable for various properes such as user
profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT340T is oen delivered with an embedded (user-inaccessible) 802.11ac WLAN
adapter equipped with a hidden custom antenna.
T
•hrough the support of typical WLAN adapters, the DT340T should be able to detect
all 802.11 access points in the vicinity for you to select the access point of your
choice for connecon.
T
•he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT340T and the
access points have to match. The SSID is case-sensive and it is recommended that
you enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure access.
W
•hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
istrator or your networking equipment literature to properly configure associated
sengs such as Authencaon mode, etc.
R
•efer to the access point operang manuals for seng up the 802.11 access points.

ENGLISH 6
Bluetooth
The Bluetooth configuraon applicaon is enabled from the System Tray or from the
Windows Mobility Center. Follow the instrucons and opons provided within the appli-
caon to configure and invoke Bluetooth connecvity with the corresponding peripherals.
USING THE Mobile Tablet
Peripherals Support
Through its USB 3.0 ports, the DT340T supports a wide range of USB-based peripherals.
These peripherals are applicable for soware installaon, applicaons storage, data
storage, and system soware recovery and updates, and are also compable with the
custom mountable cradle opon. The securable and vehicle-mountable cradle provides
an interface to VESA arms.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT Research
website.
If the DT340T comes with a 4G module, please contact your product and/or service
provider for the SIM Card installaon procedures.
7ENGLISH
ENERGY STAR® Partner
As an ENERGY STAR® Partner, DT Research Inc. follows the EPA’s product
qualificaon and cerficaon process to ensure the products marked with the
ENERGY STAR® logo are ENERGY STAR® qualified for energy efficiency.
The ENERGY STAR® program specificaons for computers were to promote energy
efficiency and reduce air polluon through more energy-efficient equipment in
homes, offices, and factories. One way products achieve this goal is by using the
MicrosoWindows power management feature to reduce power consumpon
when the product is not in use. The power management feature enables the
computer to iniate a low-power or “sleep”mode aer a period of user inacvity.
To take advantage of these potenal energy savings, users should use the default
power management sengs that are provided with ENERGY STAR qualified
computers. The default power management sengs on ENERGY STAR® qualified
computers are preset to behave in the following ways :
Turn offdisplay aer 10 minutes of user inacvity.•
Iniate a low power sleep mode for the computer aer 30 minutes of user•
inacvity.
Briefly press the power buon will bring the computer out of sleep mode.•
Addional informaon on the ENERGY STAR® program, its environmental benefits
and the potenal energy and financial savings of the power management feature
can be found on the EPA ENERGY STAR® Power Management Web site at
hp://www.energystar.gov/powermanagement.