DURHAND XBW-01 User manual

AUTO REWIND WATER/AIR HOSE REEL
INSTRUCTION MANUAL
NOTE!Read the instruction manual carefully before using the
tool and follow all given instructions.Save the instructions for
further the reference
Fasten metal mounting to the wall or ceiling with screw .
1. Drill 4x M8 holes to match the holes located in the Mounting Bracket.
2. Connect the hose reel to the Mounting Bracket with the Pivot Pin.

It is recommended to install the mounting bracket 0.8 metre from the
mounting bracket to floor .
1. Pull the hose , It has 2-3 lock positions every one metre.
2. Please don’t pull at the hose when it has finished.
3. Please hold the nozzle when the hose is retraction until it is finished.
4:Trouble Shooting:
The most common malfunction is :the hose cannot be retracted automatically
after fully extending the hose.
The reason may be that:The hose end is locked as the stop anywhere
mechanism stays in the locking point,and there’s no extra hose to be pulled out
for a release. There are two ways to solve this:
(1)hold the hose at the yellow waring mark and pull with a jerking motion until
the hose retracts.
(2)Place the item with its right side down, pull on the hose until it retracts.
(3)WATER HOSE REEL
Model
Hose
length
Hose
material
Working
Pressure
Temperature
Outer casing
material
Size of
Inlet
XBW-01
20M
PVC
8Bar
-5℃-45℃
PP
3/4”
XBW-02
15M
XBW-03
10M
XBW-05
30M
AIR HOSE REEL
Model
Hose
length
Hose
material
Working
Pressure
Temperature
Outer casing
material
Size of
Inlet
XBA-01
20M
PVC/PU/
PU mesh
24Bar
-5℃-45℃
PP
1/4”
XBA-02
15M
XBA-05
30M
XBA-03
10M
8Bar