E-XTEQ 1012EVO User manual

INTERACTIVE NAVIGATION
E-XTEQ provides International engineering / OEM’s worldwide connections / High capacity production.
HIGH-TECH INDUSTRIES: RESEARCH & DEVELOPMENT, ASSEMBLY LINES, WORKSHOPS
E-XTEQ USA T.: [phone] lE-XTEQ EUROPE T.: [phone] lE-XTEQ.COM
1012EVO
USER MANUAL
MANUEL / Reference : MAN_1012EVO_E-XTEQ_EN_V1.0

2/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Introduction ....................................................................................................... 3
Safety Guidelines............................................................................................... 4
Maintenance and Storage ................................................................................... 4
Before Use ........................................................................................................... 4
Usage Precautions............................................................................................... 5
Disassembly/Damage/Removal.......................................................................... 5
Cleaning the Product .......................................................................................... 5
Getting Started ................................................................................................. 6
Safety Reminders................................................................................................. 6
Appearance and Dimensions.............................................................................. 6
Accessories .......................................................................................................... 7
Setup ................................................................................................................... 8
Specications....................................................................................................... 8
Operations.......................................................................................................... 9
Normal Charge .................................................................................................... 9
Fast Charge........................................................................................................ 10
ECU Reash.........................................................................................................11
History.................................................................................................................12
Optimus .............................................................................................................14
Optimus Installation ...........................................................................................14
Using Optimus....................................................................................................17
Support Information...........................................................................................19
Warranty........................................................................................................... 20
Limited Warranty ............................................................................................... 20
How to Obtain Warranty ................................................................................... 20
Table of Contents
E-XTEQ 1012EVO USER MANUAL
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty
Revision of the manual
Due to software updates, your experience of the software interface (including but not limited to software features, user interfaces, and
interaction experiences) may differ from the interface presented in this manual. The software interface is subject to change.
EDITION / REVISION REFERENCE DATE UPDATES PARTS
First edition MAN_1012EVO_EXTEQ_EN_V1.0 May 2023 -

3/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Introduction
ABOUT ////////
E-XTEQ is a battery diagnostic tool and equipment manufacturer with a broad
spectrum of knowledge and understanding of battery technology for Industrial, OE and
Aftermarket Maintenance including EV/HEV applications.
Our mission is to be a passionate global leader of innovative measurement solutions by
providing premium testing equipment and unsurpassed services to our valued customers
and partners.
1012EVO has a built-in 12V/100A charger/maintainer that provides in-depth features
and functions to stabilize battery voltage during ECU reash and is capable of charging
different battery chemistries.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

4/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Safety Guidelines 1/2
MAINTENANCE AND STORAGE ////////
BEFORE USE ////////
Please read the safety guidelines carefully.
This section indicates the areas that need to be protected in order to prevent harm to
people who use this equipment, damage to property and to enable proper use of this
product.
Keep this product dry. Do not expose the 1012EVO to rain or snow.
Discontinue use and contact technical support if an overheat event has occurred, or if
corrosion or deterioration has been identied in the cables or other parts of the product.
Extreme caution: Keep liquids and conductive tools away from the 1012EVO while
operating.
1012EVO must be used in a well-ventilated area.
When operating the equipment make sure the surface is dry and clean to minimize any
risks.
Keep the exterior clean and free of dust.
Do not disassemble or modify the main unit
as it may cause an electrical shortage or re.
To reduce the risk of electrical shortage, unplug the
AC power plug before cleaning and maintenance.
The battery contains chemicals that may generate
explosive gases. Before handling the battery,
remove all metal accessories such as rings, bracelets
and necklaces. Short circuit at battery terminals may
cause burns. Do not place batteries near ames or
other heat sources
The battery uid is highly corrosive. If the battery uid
gets on your skin or clothes, immediately wash it with
soap and water. If electrolyte gets in your eyes, immediately ush
with cold water for at least 10 minutes and seek
medical attention.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

5/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Safety Guidelines 2/2
SAFETY REMINDERS ////////
SAFETY REMINDERS ////////
SAFETY REMINDERS ////////
Do not touch the power connector during use.
Keep away and Do Not Touch restricted areas
of this equipment.
Do not use extension cords as there is a risk of re and electrical shortage.
If use is necessary, check that the extension cord has the following:
1. Identical plug, cable size and the same electrical wiring as the 1012EVO.
2. Make sure the equipment is securely connected before use.
When unplugging the cord from the outlet, hold the frame of the plug to avoid damaging
the plug or power cord. Pulling the cord may cause the cable plug
to break. Replace power cord immediately if damaged.
If the outlet shape does not t the plug, please contact the E-XTEQ service department.
Phone: [phone]
E-mail: [e-mail]
Do not disassemble the product or damage or remove the stickers or labels on the
product. If the product’s case has been disassembled or damaged by the user, all
warranties will be void. Always contact a designated E-XTEQ Service Center for repairs.
Do not insert metallic objects into the unit to prevent electric shock, re, short circuit,
possible leaking of harmful substances and personal injuries. Do not store the product in
a wet or humid place. Always store the product in a dry place.
It is recommended that you clean the product by wiping it gently using a soft cloth.
Do not use water, chemical substances or detergents. They may cause discoloration or
corrosion to the product’s exterior and may cause a re or electric shock.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

6/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Getting Started 1/2
SAFETY REMINDERS ////////
APPEARANCE AND DIMENSIONS ////////
Please review the safety guidelines in this manual before using the 1012EVO for safety
operations
When unplugging the 1012EVO, pull on the plug frame rather than the cord to reduce
the risk of damaging the power plug or cord.
The 1012EVO is designed for indoor use. Use outside in dry weather only.
Dimension Details:
Metrics: 234.95 W x 342.9 L x 120.65 H (mm)
Imperial: 9.25 W x 13.5 L x 4.75 H (inch)
Weight:
Kilogram: 5.66 (kg)
Pounds: 12.5 (lbs.)
Width
9.25in / 23.495cm
with handle: 10.5in / 26.67cm
Depth
13.5in / 34.29cm
Height
4.75in / 12.065cm
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

7/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Getting Started 2/2
ACCESSORIES ////////
Power Cord
16.4 ft/5m power cord is supplied with the Stellantis 1012EVO.
*The cord will be suitable based on the destination country standards*
Charge Cable with Clamp
The cable will be used to connect the battery to the 1012EVO for charging.
Accessories Box
1. 3 Anti-scratching mounting magnets with rubber coating
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

8/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Setup 1/1
SPECIFICATIONS ////////
Anti-scratch-
ing mounting
magnets with
rubber coating
Safety strap
Metal handle
Connectors for
accessories
Power socket
Charging
cable
connector
Intuitive 4.3”
touch screen
LED display
Polymer
protective
end covers
Anodized
aluminum
body
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

9/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Operations 1/5
NORMAL CHARGE ////////
BC1012 NORMAL CHARGE QUICKGUIDE
Main Menu
12.30V
The Main Menu has three icons. Charge, History
and Settings. Select the Charge Icon to Proceed
1
MAIN MENU
Main Menu
12.30V
FLOODED AGM EFB
Select Battery Chemistry
3
SELECT CHARGING VOLTAGE
Enter Capacity Value (Ah)
050
5
SELECT END CURRENT
Use the arrows to select the AH capacity
value of the battery.
Note: If not available, use Fast Charge mode shown on
next page.
Warning
Wear safety goggles
Batteries produce explosive gases and can explode
Keep flames away from batteries
7
WARNING SCREEN
The Warning Screen will show a couple
warnings before proceeding.
Press Y to Continue
15V
12V
20A
10A
2A
(Minutes) 10 20 30 40
V-target: 14.4V
I-limit: 26.0A
Time out: 20
I-end: 9.0A
Note: Press “Y” to go back to main menu.
When the charge finished, a graph will
display with the charging parameters.
CHARGING GRAPH
9
Main Menu
12.30V
ECU
To start a CHARGE, touch the normal
charge Icon.
2
SELECTING CHARGE MODE
Enter CCA value
500
Use the arrows to select the battery CCA
Value. Press Y to confirm.
4
SELECT CHARGING CURRENT
Connect The Clamps
6
CLAMP CONNECTION
Make sure the clamps are connected.
Battery is charging. Press Y to st.
00:06
12.93V
26.39A
Note: Press “Y” to stop the test.
The screen will display a timer, the
charging voltage and the charging current.
CHARGING DIAL
8
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

10/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Operations 2/5
FAST CHARGE ////////
BC1012 FAST CHARGE QUICKGUIDE
Main Menu
12.30V
The Main Menu has three icons. Charge, History
and Settings. Select the Charge Icon to Proceed
1
MAIN MENU
Main Menu
12.30V
FLOODED AGM EFB
Select Battery Chemistry
3
SELECT CHARGING VOLTAGE
Connect The Clamps
5
CLAMP CONNECTION
Make sure the clamps are connected.
Battery is charging. Press Y to st.
00:06
12.93V
26.39A
7
CHARGING DIAL
The screen will display a timer, the
charging voltage and the charging current.
Note: Press “Y” to stop the test.
Main Menu
12.30V
ECU
To start a CHARGE, touch the fast charge
Icon.
2
SELECTING CHARGE MODE
Enter CCA value
500
Use the arrows to select the battery CCA
Value. Press Y to confirm.
4
SELECT CHARGING CURRENT
Warning
Wear safety goggles
Batteries produce explosive gases and can explode
Keep flames away from batteries
6
WARNING SCREEN
The Warning Screen will show a couple
warnings before proceeding.
Press Y to Continue
15V
12V
20A
10A
2A
(Minutes)1 02 03 04 0
V-target: 14.4V
I-limit: 26.0A
Time out: 20
I-end: 9.0A
CHARGING GRAPH
8
When the charge finished, a graph will
display with the charging parameters.
Note: Press “Y” to go back to main menu.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

11/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Operations 3/5
ECU REFLASH ////////
BC1012 ECU REFLASH QUICKGUIDE
Main Menu
12.95V
The Main Menu has three icons. Charge, History
and Settings. Select the Charge Icon to Proceed.
1
MAIN MENU
Select Charging Mode
12.95V
ECU
Select ECU Reflash Mode.
SELECT CHARGING MODE
2
Warning
CAUTION Warning : 1500W High Power
Power output will be activated to
initialize the power supply
For your safety, please ensure
clamps connection before
continuing
Warning screen displays before test starts.
3
WARNING
Press to Start
4
PRESS TO START
Click “ ” to to start test.
Stop Charge?
6
Click “
Click “X” to go back to charging.
STOP CHARGING
Main Menu
12.95V
After stopping charge, it will go back to the
Main Menu.
7
MAIN MENU
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty
Power Supply
00:06
13.37 V
10.23 A
STOP
%15.00 A
5
POWER SUPPLY
Power supply mode in charge.
To stop the charge, press the stop button.

12/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Operations 4/5
HISTORY ////////
The History Icon in the Main Menu shows the records of previous tests
performed with the Trolley and with the Remote.
Go to the “History” icon.
Main Menu
--.-- V
Pressing the button will show more
information regarding the partitest that
was done.
1/2 >
BC_0000E
BC_0000D
BC_0000C
BC_0000B
BC_0000A
BC_00009
BC_00008
BC_00007
BC_00006
05/12/2023
04/11/2023
04/11/2023
04/04/2023
04/04/2023
04/11/2023
03/09/2023
03/09/2023
ID
05/12/2023
09:52:50
09:52:50
15:58:18
15:32:28
14:18:18
10:38:55
13:04:07
08:28:49
09:52:50
Date Time
There is the option to view the full
information, to delete the record, or
print the receipt again.
Job selected
VIN number
Date
Time
Charging Type
Charge Mode
Voltage
Rated CCA
Batt. Capacity
SOC
05/12/2023
09:52:50
Fast Charge Mode
Charge Uct
13.18 V
545
60.00
100%
BC_0001A
Measurement Global Solutions
Select the job you are interested in and
press the “Detail” icon.
Job selected
VIN number
Date
Time
Charging Type
Charge Mode
Voltage
Rated CCA
Batt. Capacity
SOC
05/12/2023
09:52:50
Fast Charge Mode
Charge Uct
13.18 V
545
60.00
100%
BC_0001A
Measurement Global Solutions
The details will be displayed.
Job Selection
--.-- V
VIN number
Date
Time
Original Battery
Out Vehicle
LITHIUM
Normal CCA
Batt. OE or RPL
CCA
05/12/2023
09:52:50
---------------------------- Battery Informations ------------------------
Charge
____
545
60.00
:
Tool Mode
Batt. Location
Batt. Type
Batt. Standard
Batt. Capacity
:
:
:
:
:
:
:
:
:
Select the job you are interested in and
select the “Print” icon.
Job selected
VIN number
Date
Time
Charging Type
Charge Mode
Voltage
Rated CCA
Batt. Capacity
SOC
05/12/2023
09:52:50
Fast Charge Mode
Charge Uct
13.18 V
545
60.00
100%
BC_0001A
Measurement Global Solutions
The remote must be placed in the
docking station in order to print.
Printing
--.-- V
Select “History” icon again.
Main Menu
--.-- V
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

13/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Operations 5/5
All jobs can be automatically saved into OPTIMUS PC software via Wi-Fi
connection (remote to network).
Pressing the button on the “ARGOS” icon will transfer automatically all job on
OPTIMUS PC Software.
If you are not connected to Wi-Fi
(Remote to Network), there will be a
message displayed. Please follow the
steps indicated in the section “Wi-Fi
Connection (Remote to Network) in
this manual.
HISTORY ////////
Main Menu
--.-- V
Argos Sync Jobs
--.-- V
YOU MUST CONNECT YOUR DEVICE TO WI-FI
PRESS ANY BUTTON
Argos Jobs
--.-- V
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

14/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Optimus 1/5
OPTIMUS INSTALLATION ////////
All charging data (jobs) performed by 1012EVO are stored and can also be
uploaded into a dedicated program: OPTIMUS.
When a new software update is released, OPTIMUS will automatically propose
to update the 1012EVO upon connection of its Remote via its dedicated USB
cable.
If the Trolley needs to be updated, when connecting to it, Remote will display
the following message “Please update the trolley with Optimus”.
To download OPTIMUS, open a web page on the computer and go to the web
site: http://e-xteq.com.
Click on the DOWNLOAD tab
Then click on the “Download OPTIMUS” button.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

15/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Optimus 2/5
OPTIMUS INSTALLATION ////////
Open the download is nished, you can save and open the executable le
“OptimusSetup.exe”.
The rst time you even open OPTIMUS, you have to create an account. Click on
“Don’t have an account yet?” link.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

16/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Optimus 3/5
OPTIMUS INSTALLATION ////////
Fill up all the empty elds, check the “I’m not a robot” box and then click
“Register”
An internet page will open with your settings. Meanwhile, you will receive an
email to conrm your email address.
It is very important to conrm your email address by clicking on the
link received. (If the link isn’t clickable from the mail body, display
the email in a web browser.)
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

17/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Optimus 5/5
USING OPTIMUS ////////
Depending on the conguration of your computer installation, it
may be necessary to create an authorization to ARGOS IP Address:
35.204.186.65.
You can now use OPTIMUS, using your credentials.
You will then have access to your dashboard.
When connecting your tool, it will appear in “Connected Devices”. All the
recorded job les will be transferred automatically.
Clicking on the image of the product will give you access to the tools
Dashboard.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty
1012C01E0010010
1012C01E0010010

18/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Optimus 5/5
USING OPTIMUS ////////
If a new software update is available, this update will be proposed. If the
latest version is already installed, “Your device is up to date” will be shown.
Jobs can be found under the “JOBS” tab. They can be ltered and also
exported into a CSV le.
“Apply Filter” will show a list of jobs. Click on the job to see the detail. It is
possible to generate and download a PDF le of the job.
When you want to leave OPTIMUS, please click the eject button to safely
eject the USB that is connected from the tool.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty
1012C01E0010010
1012C01E0010010
1012C01E0010010

19/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Support 1/1
SUPPORT INFORMATION ////////
Contact Us
Tech Support - USA
1-877-453-3265 English
[e-mail]
Hours of Operation (EST)
Monday - Friday: 8 am - 8 pm
Comprehensive support also available
through www.e-xteq.com
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty

20/21
1012EVO User Manual / Ref. MAN_1012EVO_E-XTEQ_EN_V1.0
Warranty 1/1
LIMITED WARRANTY ////////
HOW TO OBTAIN WARRANTY ////////
The 1012EVO product is backed by a Limited 3-Year Warranty. The warranty covers
manufacturer defects and workmanship. The warranty excludes misuse or abuse and
normal wear and tear.
All accessories are backed by 1-Year Warranty for manufacturer defects only.
All accessories with a 1-Year Warranty are listed below. Please read “How to obtain
warranty” instructions in order to receive the correct parts and prevent any charges.
ACCESSORIES:
AC Power Cord
Charge Cable with Clamps
Remote Clamps
Pistol
USB Cable
Before sending a unit back for repair, an RMA (Return Materials Authorization) number
must be obtained by contacting E-XTEQ Technical Support:
suppor[email protected]
1-877-453-3265
E-XTEQ will ascertain if the unit needs to come in for repair or replacement.
If the unit has to be replaced, E-XTEQ will provide full instructions in order for the end
user to receive the replacement parts in the shortest delay.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Accessories
Setup
Specications
Operations
Normal Charge
Fast Charge
ECU Reash
History
Optimus
Optimus Installation
Using Optimus
Support Information
Warranty