E-XTEQ GM DCBS Firmware update

Windows PC operaon system required for
Opmus installaon.
Note: It is recommended to turn off firewall sengs before PC
soware installaon.
Go to www.e-xteq.com. Click on
DOWNLOAD and click the buon “Soware
update for DCBS”.
Note: If Opmus is already instaled on your computer, skip to
step 5.
Aer the Opmus file is finished
downloading, locate and open it to run the
OpmusSetup.exe file.
Follow the prompts to connue the
installaon process.
Connect your device to the PC using the
USB cable included in the kit. This will allow
a two-way connecon between your device
and PC.
Aer Opmus has installed, locate and
double click the Opmus icon on your
desktop.
Opmus will ask you to enter your Username
and Password. If this is your first me, you will
have to register for an account on Opmus.
The tool will be recognized by Opmus.
Click on your Device for update. Your device
will complete the update automacally if
any available.
AR_DCBS_UPDATE_OPTIMUS_V4.1
Soware installaon guide (Opmus)
1
2
34
56
78

Reserved for
Serial Number Scker
AR_DCBS_UPDATE_OPTIMUS_V4.1
TECH SUPPORT - USA
1-877-453-3265 English
[email protected]om
HOURS OF OPERATION (EST)
Monday - Friday: 8 am - 8 pm
Comprehensive support also available
through www.e-xteq.com
CONTACT US
IR THERMOMETER
CONNECTION TO
TROLLEY
BATTERY STATUS
DIAGNOSTIC/CHARGE
INDICATOR
TROLLEY CONNECTION
INDICATOR
ERROR MODE INDICATOR
LOAD TEST INDICATOR
START TEST
CANCEL, PREVIOUS STEP
OK, NEXT STEP
ARROWS - UP,
DOWN, LEFT, RIGHT
POWER ON/OFF
GM DCBS Remote
ETHERNET PORT FOR
PHYSICAL CONNECTION
REMOTE CLAMP
CONNECTION PORT
REMOTE CONNECTION
VOLTAGE DISPLAY
TROLLEY CONNECTION
VOLTAGE DISPLAY
1313
14
15
16
14
15
16