Ebyte E104-BT05-TB User manual

Chengdu Ebyte Electronic Technology Co.,Ltd E104-BT05-TB User manual V1.0
1
E104-BT05-TB User Manual V1.0

Chengdu Ebyte Electronic Technology Co.,Ltd E104-BT05-TB User manual V1.0
2
1. Overview
1.1 Features
The test backplane of E104-BT05-TB adopts USB interface, which can be used to quickly test the
features and functions related to E104-BT05 Bluetooth.
1.2 Electrical performance parameters
NO.
Parameter
name
Parameter
value
Note
1
Support
module
E104-BT05
BLE_transparent transmission module
2
Test plate size
46.5 * 25 mm
USB connector and module not included
3
Production
process
Lead free
process,
machine pasted
Wireless products must be machine pasted to
ensure batch consistency and reliability
4
Power supply
interface
USB
-
5
communicatio
n interface
TTL
-
6
Working
temperature
-40 ~ +85℃
Industrial grade
7
Operating
humidity
10% ~ 90%
Relative humidity, non condensing
8
Storage
temperature
-40 ~ +125℃
Industrial grade

Chengdu Ebyte Electronic Technology Co.,Ltd E104-BT05-TB User manual V1.0
3
2. Function
2.1 Dimension and function definition
NO.
Function
Description
1
Reset button
Module reset key, valid at low level
2
IO0 button
Available for I00 level reading
3
Data indication
LED
Yellow LED for data indication
4
Connection
indication LED
Yellow LED for connection indication
5
PWM1
indication LED
Blue LED for PWM1 wave indication
6
PWM2
indication LED
Blue LED for PWM2 wave indication
7
Power indicator
LED
Red LED for normal power supply indication of test board
8
VBAT power
port
External power supply 2.7-3.6V
9
Module pin out
For easy debugging, refer to manual E104-BT05
10
USB power port
USB power 5V output
11
Module pin out
For easy debugging, refer to manual E104-BT05
12
Module RXD
processing
Short circuit the jumper cap, and connect the module RXD (receiving
pin) with the serial port chip TXD pin of the test board
13
Module TXD
processing
Short circuit the jumper cap, and connect the module TXD (sending
pin) with the serial port chip RXD pin of the test board
14
Module Mode
Configuration
The module is connected. Short circuit the upper two pins to enter the
configuration mode. Short circuit the lower two pins (or hang in the
air) to enter the transparent mode
15
Module wake-up
processing
After the module is disconnected and enters sleep through the
command, short circuit the upper two pins once, and the module wakes
up
16
Module power
supply mode
selection
Short circuit two pins to the left, select USB internal power supply
mode, short circuit two pins to the right, select VBAT external power
supply

Chengdu Ebyte Electronic Technology Co.,Ltd E104-BT05-TB User manual V1.0
4
2.2 Quick start
As shown in the figure above, for the serial numbers 12 and 13, use the jumper cap to short circuit,
for the serial number 16, short circuit the left two pins, select the USB internal power supply mode, and
you can directly use the serial port assistant to test.
2.3 CH340 Drive installation
The USB to TTL chip used in this test board is CH340. If it is used for the first time, the PC will
prompt you to install a new device driver. You can download and use the driver software
provided by our company or search and download on the Internet by yourself.
3. Customized cooperation
★If customers need to customize products, please contact us.
★Ebyte has reached deep cooperation with many well-known enterprises.

Chengdu Ebyte Electronic Technology Co.,Ltd E104-BT05-TB User manual V1.0
5
4. About us
EBYTE is a company specialized in providing wireless data transmission solutions and products
◆Independent research and development of hundreds of models of products and software;
◆Wireless transparent transmission, WiFi, Bluetooth, Zigbee, PKE, digital radio, etc;
◆It has nearly 100 employees, tens of thousands of customers and millions of products;
◆Its business covers more than 30 countries and regions around the world;
◆It has passed the certification of ISO 9001 quality management system and ISO 14001
environmental system;
◆It has a number of patents and software copyrights, and has passed the international FCC/CE/ROHS
and other authoritative certification.
Sales hotline: [phone] Tel: [phone]
Support: sup[email protected]m Website: https://www.es-ebyte.com
Address: Innovation Center B333~D347, 4# XI-XIN road,High-tech district (west), Chengdu,
Sichuan, China