Echo 2620 Series User manual
1
2620 SerieS Flex Drive ShaFt Kit
inStallation inStructionS
P/N 90206 For SrM-2620
P/n 90207 For SrM-2620t
Kit 90206 and 90207includes:
Part Number Description Qty
A556001760 Clutch Drum 1
61092255931 Main Pipe Fixture 1
90070100012 Drum Retaining Ring 1
C506000470 Flexible Drive Cable 1
P021051520 Gear Case Assy (90206 1.62 Sq Drive) 1
P021051360 Gear Case Assy (90207 2.07 Sq Drive) 1
DISASSEMBLY
1. Remove Spark Plug, and Air Filter Cover. Remove bottom and side
Cover by rotating up to disengage from Engine Cover hinge.
Note: Clip must be reused, do not deform original shape.
Cable and remove cable from carburetor bracket.
torx driver. Remove Engine Cover.
engine, then slide engine off Main Pipe assembly.
•
• Cupped Pliers
•
• 10mm Wrench
•
• Soft Mallet
• W-D 40
• Press
• Rubbing Alcohol
X7672340001
12/16
Remove
Remove
Clip
Flange
2
6.
and remove Fan Cover from engine.
pliers.
the rubber and Fan Cover.
the Fan Cover.
NOTE:
Fan Cover may be damaged.
the Fan Cover.
12. Remove the Clutch Drum Snap Ring using external snap ring pliers
3
Note:
requiring a high press load to push the shaft through the bearings.
Support the Fan Cover so it does not rest on the cover Locating Pins.
.
ASSEMBLY
14. Press the replacement Clutch Drum into Fan Cover until drum bottoms
in the bearings. Prevent drum distortion by pressing only on the center
of drum.
Drum.
Align
4
20.
center, and top left.
22. Remove splined Driveshaft from Main Pipe.
Debris Shield to Gear Case.
Note:
-
grease then install Driveshaft into Main Pipe. Driveshaft end should
5
Clip
Flange
28.
engine then slide engine onto Main Pipe assembly.
-
-
plete.
engagement.
Flex cable conversion is complete.
6
ECHO, INCORPORATED
400 OAKWOOD ROAD
LAKE ZURICH, IL 60047 USA
PHONE: 1-800-673-1558
www.echo-usa.com
ECHO CONSUMER PRODUCT SUPPORT: If you require assistance or have questions concerning the application,
operation or maintenance of this product you may call the ECHO Consumer Product Support Department at 1-800-673-
1558 from 8:30 am to 4:30 pm (Central Standard Time) Monday through Friday. Before calling, please know the model
and serial number of your unit to help your Consumer Product Support Representative.
REPLACEMENT MANUALS: Operator's, Parts, and Safety Manuals may be obtained from ECHO, or may be down-
loaded free from ECHO's website. Make sure you know the model number and serial number of your unit so you can
obtain the correct manual.
This manual suits for next models
2
Other Echo Power Tools Accessories manuals
