
Safety Information (continued)
CAUTION: Only use fuses of the same type and characteristics. Short-
circuiting the fuse holders is prohibited.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause
undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
could void the user’s authority to operate the equipment.
Responsible Party-U.S. Contact Information
Elecwish Inc/Add: 4225 Etiwandaavenue, Suite 1 mira loma, California 91752,
USA/Elecwish.com
3
Please keep observed safety notes before use:
Class 2 POWER SUPPLY
Model: S024D2401000U
Input: 100-240V~, 50/60 Hz, Max.600mA
Output: 24Vdc, 1000mA
"IMPORTANT SAFETY INSTRUCTIONS--SAVE THESE INSTRUCTIONS" AND "DANGER-TO
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS"
To comply with the published safety standards, the following must be considered when using
this power supply.
1. For connection to a supply not in the U.S.A, use an attachment plug adapter of the proper