manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Eco-Systems
  6. •
  7. Indoor Furnishing
  8. •
  9. Eco-Systems LTK-1158 User manual

Eco-Systems LTK-1158 User manual

www.classicexhibits.com
866.652.2100
© 2011
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #XXXXX - LTK-1158 - Pedestal Assembly
Laminated Box
w/ Door
8
8
8
8
9
10
Part Number
8
9
10
Qty for Step
4
1
1
Steps
1)
Attach horizontal extrusions [8] to horizontal extrusions [9 and 10].
2) Attach plex piece to box using standoff barrels and caps as shown.
3) Set counter atop assembled pedestal.
Description
38”h Vertical Extrusion
23“w Horizontal Extrusion
19“w Horizontal Extrusion
Plex
NOTE:
Laminated Box and Extrusions [9 and 10]
should remain assembled when shipping
www.classicexhibits.com
866.652.2100
© 2011
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #XXXXX - LTK-1158 - General Setup Instructions
The Tool
Typical Connection Horizontal Inline Connection (remove only one setscrew)
Base Plate Connection Vertical Connection
(remove only two setscrews)
Most exhibits can be assembled
with the supplied Hex Key Tool.
Occasionally, a flat head screw-
driver may be required.
Most horizontal extrusion connections have a patented expandable lock.
This lock inserts into the groove of an opposing extrusion. Tightening the
lock with the Hex Key Tool expands the lock and creates a strong positive
connection.
Remove only (1) setscrew when disassembling.
Replace setscrew in extrusion after assembling it.
Before packing, replace setscrew in extrusion to
avoid losing it.
Attach base plate to round or
square vertical extrusion using
the bolt provided. Be careful not
to strip the threads.
When vertical extrusions are
packed in portable cases rather
than crates or tubs, they must be
broken down into smaller sections
which then require assembly.
Remove only (2) setscrews when
disassembling. Replace setscrews
in extrusion after assembling it.
Before packing, replace setscrews
in extrusion to avoid losing them.
Using Your Setup Instructions
The Euro LT Hybrids Setup Instructions are created specifically for your configuration.
They are laid out sequentially in levels, including exploded views, and a logical series of
detailed steps to assemble the main structure and components. We encourage you to study
the instructions before attempting to assemble your exhibit.
Each page reminds you to tighten the setscrews after disassembling your exhibit to prevent loss of
the locks and setscrews (see below in RED). This is VERY IMPORTANT.
Cleaning and Packing Your Display
1) Use care when cleaning aluminum extrusion or acrylic inserts. Use only non-abrasive cleaners.
2) When cleaning laminate inserts, countertops, or panels use mild cleansers and a soft material such
as cotton.
3) Keep all display components away from extreme heat and long exposure to sunlight to avoid
warping and fading.
4) Retain all packing material. It will make re-packing much easier and will reduce the likelihood of
shipping damage.
Typical Connection (cont’d) Numbered Label
Each extrusion contains a numbered
label which corresponds with setup
instructions. The label is located within
a groove of the extrusion (when possible).
With extrusion components the labels
contain Black numbers unless otherwise
specified.
Detail C Detail D Detail EDetail B
Detail A
Setscrews
Cut Away View Of
Slide Clips
Left
Panel
Right
Panel
Left Hand
Grasps Panel
Firmly
With Right Hand Thumb
Close to Seam
Squeeze,
Push Forward,
And Lift
Color Coded Clip
w/ assembly number
Panel Lock
When Required
Black Clip
is bottom of
panel
Connector Top View of Panels with LocksExample of Connection
Color Coded Clip
w/ assembly number
Panel Lock
When Required
Each component has 2 clips,
the lower clip is ALWAYS
black. The top clip is color
coded to distinguish the
level. The color coded clip
also contains the numbered
label.
Components connect together
by aligning them and sliding
downward connecting clips
together.
Configurations are assembled
from left to right, usually starting
with #1 and following the
numbered sequence.
The first level of components contains panel locks
that are located at the top of the panel for extra
stability and a seamless connection. When dis-
assembling panels, twist top connection slightly
and lift right panel upward.
General Setup Instructions for Extrusion System
General Setup Instructions for Panel System
Level 1 = Blue
Level 2 = Red
Level 3 = Green
Level 4 = Black

Other Eco-Systems Indoor Furnishing manuals

Eco-Systems ECO-37C Manual

Eco-Systems

Eco-Systems ECO-37C Manual

Eco-Systems ECO-1067 User manual

Eco-Systems

Eco-Systems ECO-1067 User manual

Eco-Systems ECO-2C User manual

Eco-Systems

Eco-Systems ECO-2C User manual

Eco-Systems ECO-4049 User manual

Eco-Systems

Eco-Systems ECO-4049 User manual

Eco-Systems ECO-2059 User manual

Eco-Systems

Eco-Systems ECO-2059 User manual

Eco-Systems ECO-2003 Manual

Eco-Systems

Eco-Systems ECO-2003 Manual

Eco-Systems Backlit Hybrid S ECO-1087 User manual

Eco-Systems

Eco-Systems Backlit Hybrid S ECO-1087 User manual

Eco-Systems ECO-1066D Manual

Eco-Systems

Eco-Systems ECO-1066D Manual

Eco-Systems ECO-35C User manual

Eco-Systems

Eco-Systems ECO-35C User manual

Eco-Systems ECO-42C Manual

Eco-Systems

Eco-Systems ECO-42C Manual

Eco-Systems ECO-8C User manual

Eco-Systems

Eco-Systems ECO-8C User manual

Eco-Systems RIO 10X10 User manual

Eco-Systems

Eco-Systems RIO 10X10 User manual

Eco-Systems ECO-1094 Manual

Eco-Systems

Eco-Systems ECO-1094 Manual

Eco-Systems ECO-1010 User manual

Eco-Systems

Eco-Systems ECO-1010 User manual

Eco-Systems Eco-104T User manual

Eco-Systems

Eco-Systems Eco-104T User manual

Eco-Systems ECO-42C User manual

Eco-Systems

Eco-Systems ECO-42C User manual

Eco-Systems ECO-1036 Manual

Eco-Systems

Eco-Systems ECO-1036 Manual

Eco-Systems ECO-1109 Manual

Eco-Systems

Eco-Systems ECO-1109 Manual

Eco-Systems 2059 Manual

Eco-Systems

Eco-Systems 2059 Manual

Popular Indoor Furnishing manuals by other brands

Autonomous ErgoChair Assembly instructions

Autonomous

Autonomous ErgoChair Assembly instructions

Giorgetti CLAUDIANO Assembling instructions

Giorgetti

Giorgetti CLAUDIANO Assembling instructions

Presidential Billiards CARMEL Assembly instructions

Presidential Billiards

Presidential Billiards CARMEL Assembly instructions

Emmezeta BCCT134 Assembling Instruction

Emmezeta

Emmezeta BCCT134 Assembling Instruction

Wójcik MADRAS 01L-2D Assemble Instruction

Wójcik

Wójcik MADRAS 01L-2D Assemble Instruction

Steelcase Flex 120 Straight manual

Steelcase

Steelcase Flex 120 Straight manual

Aprimatic WI-MATIC ATC300E MET Fitting instructions

Aprimatic

Aprimatic WI-MATIC ATC300E MET Fitting instructions

siena GARDEN Silva C31058 Assembly instruction

siena GARDEN

siena GARDEN Silva C31058 Assembly instruction

Core Products CR 800-Set Assembly instructions

Core Products

Core Products CR 800-Set Assembly instructions

VEVOR YX-K450-100 manual

VEVOR

VEVOR YX-K450-100 manual

modway MOD-5244 Assembly instructions

modway

modway MOD-5244 Assembly instructions

John Lewis 803/43703 quick start guide

John Lewis

John Lewis 803/43703 quick start guide

rst brands Benson OP-AWCLB-BEN Assembly instructions

rst brands

rst brands Benson OP-AWCLB-BEN Assembly instructions

Rize REVOLUTION quick start guide

Rize

Rize REVOLUTION quick start guide

Grohe Allegro E 04180XX0 Specification sheet

Grohe

Grohe Allegro E 04180XX0 Specification sheet

Arthauss Furniture La13 Assembly instructions

Arthauss Furniture

Arthauss Furniture La13 Assembly instructions

Rauch M2431 Assembly instructions

Rauch

Rauch M2431 Assembly instructions

Carson MP104-0986 Assembly instructions

Carson

Carson MP104-0986 Assembly instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.