EefaCo.Store 88 5050 61 User manual

Hardware List
D.
Side Frame
1 pc.
E.
Side Frame
1 pc.
B.
Front Stretcher
1 pc.
C.
Back Stretcher
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Cabinet
1 pc.
88 5050 61
Oak Hill Buffet
Tools required for assembly : Phillips screwdriver
Part List
F.
Shelf
1 pc.
Head Cap Bolt
8 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Wood Screw (long)
3 pcs.(+1 extra)
Wood Screw (short)
3 pcs.(+1 extra)
Flat Washer
8 pcs. (+1 extra )
Spring Washer
8 pcs. (+1 extra )

Assembly Instructions
IMPORTANT
You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Attach Front Stretcher (B) and
Back
with
Stretcher (C) to Side Frame (D)
Head Cap Bolts, Spring Washers
and Flat Washers. (See figure 1)
C
STEP 2
STEP 3
A
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt
Wood Screw
(long)
Wood Screw
(short)
Attach Shelf (F) to unit with
Attach Side Frame (E) to unit
with
Head Cap Bolts, Spring Washers
and Flat Washers.
Head Cap Bolts,
Spring Washers and Flat Washers.
D
B
E
F
Remove all drawers, then place Cabinet (A)
upside down on a soft cloth.
Attach unit onto Cabinet (A) with
3X Wood Screws (short) for Front Stretcher
and 3X Wood Screws (long) for Back Stretcher.
Turn the unit to its’ upright position
Slide all drawers into position.
Figure 1