EefaCo.Store Home Styles 88 5527 09 User manual

Part List
Hardware List
E.
Base
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
Casual Attire For Today's Home
Cam Lock
19 pcs.(+1 extra)
Cam Lock Screw
19 pcs.(+1 extra)
88 5527 09
Entertainment Stand
Homestead
F.
Plinth
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Pull Handle
2 pcs.
Adjustable Pin
12 pcs.(+1 extra)
Machine Screw
2 pcs.(+1 extra)
M.
Shelf
2 pcs.
B.
Side Panel
.1 pc
C.
Side Panel
1 pc.
D1.
Middle Panel
.1 pc
D2.
Middle Panel
.1 pc
H.
Back Panel
2 pcs.
I.
Back Panel
1 pc.
J.
Door
1 pc.
K.
Door
1 pc.
L.
Shelf
1 pc.
G.
Leg
4 pcs.
Wood Screw
for Magnet
4 pcs.(+1 extra)
Magnet
2 pcs.

E
IMPORTANT
Do not tighten up all the screws until
each part is properly assembled.
STEP 1
Assembly Instructions 2/4
F
A
B
C
Cam Lock Screw
Attach 2X Magnets
to front rail of Top (A) with Wood Screws.
Insert Cam Lock Screws into the pre-drilled holes
of Top (A),
Base (E), Plinth (F).
Side Panel (B) and (C),
Magnet Wood Screw

D1
D2
STEP 3
Assembly Instructions 3/4
Cam Lock
Screw
Cam Lock
Figure 1
E
E
STEP 2
Attach Middle Panel (D1)
and (D2) onto Base (E)
with Cam Locks (see Figure 1).
B
C
F
G
G
G
G
Cam Lock
Attach Plinth (F) to the unit with Cam Locks.
Attach Side Panel (B) and (C) to the unit with Cam Locks.
Attach Legs (G) into the pre-drilled holes of Base (E) and tighten.

Assembly Instructions 4/4
Figure 2
Figure 3
STEP 4
Slide Back Panels (H) and (I) into place.
Assemble Pull Handles to Doors (J) and (K) with Machine Screws. (See figure 3)
Place Top (A) onto the unit, using Cam Locks.
Attach Doors (J) and (K) by sliding the door lift hinges into the side panels lift hinges
(See figure 2)
M
M
L
Adjustable Pin
Insert Adjustable Pins into side panels and middle panels at the desired level.
Place Shelves (L) and (M) into position.
STEP 5
Cam Lock
A
J
K
HI
H