EefaCo.Store Home Styles Hanover 88 5532 09 User manual

Hardware List
F.
Base
1 pc.
L.
Shelf
2 pcs.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
Casual Attire For Today's Home
Tools required for assembly : Phillips screwdriver
Cam Lock
16 pcs.(+1 extra)
Cam Lock Screw
16 pcs.(+1 extra)
Adjustable Pin
12 pcs.(+1 extra)
Pull Handle
2 pcs.
Machine Screw
4 pcs.
88 5532 09
Entertainment Stand
Hanover
Part List
B.
Side Panel
.1 pc
C.
Side Panel
1 pc.
E.
Middle Panel
.1 pc
D.
Middle Panel
.1 pc
G.
Back Panel
2 pcs.
H.
Back Panel
1 pc.
I.
Door
1 pc.
J.
Door
1 pc.
K.
Shelf
1 pc.
Wood Screw
for Back Panel
8 pcs.(+1 extra)
Wood Screw
for Magnet
4 pcs.(+1 extra)
Magnet
2 pcs.

IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
STEP 1
Assembly Instructions 2/4
A
B
C
F
Cam Lock Screw
Attach 2X Magnets
to front rail of Top (A) with Wood Screws.
Insert Cam Lock Screws into the pre-drilled holes
of Top (A),
Base (F).
Side Panel (B) and (C),
Magnet
Wood Screw

D
E
Cam Lock Screw
Cam Lock
F
STEP 3
Assembly Instructions 3/4
Figure 1
STEP 2
Attach Middle Panel (D)
and (E) onto Base (F)
with Cam Locks. (see Figure 1)
B
FC
Cam Lock Screw
Cam Lock
Attach Side Panel (B) and (C) to the unit with Cam Locks.

Assembly Instructions 4/4
STEP 4
Slide Back Panels (G)
and (H) into place.
Place Top (A) onto the unit,
using Cam Locks.
H
GG
A
Cam Lock
K
L
L
Adjustable Pin
STEP 5
Insert Adjustable Pins into
side panels and middle panels
at the desired level.
Place Shelves (K) and (L) into position.
STEP 6
Insert 8X Wood Screws from the back of
the unit, tighten up all the Wood Screws.
Note: Please make sure unit is level
before tightening these screws.
Machine Screw
Figure 2 Figure 3
Assemble Pull Handles to
Doors (I) and (J) with
Machine Screws
(See figure 3).
Attach Doors (I) and (J)
by sliding the door lift hinges
into the side panels lift hinges
(See figure 2).
J
I