EefaCo.Store Home Styles Homestead 88 5527 194 User manual

Part List
Hardware List
Tools required for assembly : Phillips screwdriver
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
G.
Back Panel
1 pc.
H.
Back Panel
1 pc.
I.
Base
1 pc.
J.
Shelf
1 pc.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Stretcher
1 pc.
E.
Stretcher
1 pc.
F.
Stretcher
1 pc.
L.
Door
1 pc.
M.
Media Box
1 pc.
N.
Media Box
2 pcs.
K.
Door
1 pc.
Hutch Unit
88 5527 194
Homestead
Computer Cabinet
Cam Lock
18 pcs.(+1 extra)
Cam Lock Screw
18 pcs.(+1 extra)
Machine Screw
2 pcs.(+1 extra)
Steel Plate
Connecter
2 pcs.
Magnet
2 pcs.
Wood Screw
for Back Panel
12 pcs.(+1 extra)
Pull Handle
2 pcs.
Wood Screw
40 pcs. (+1 extra)
(Knock-Down Construction, please refer to page No. 5/6 and 6/6 of these instructions
for steps to assemble Media Box)
Wood Screw
for Steel Plate
4 pcs.(+1 extra)

IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
Assembly Instructions 2/6
STEP 1
A
Attach 2X Magnets
to pre-drilled holes of Top (A) with Wood Screws.
Insert Cam Lock Screws into the pre-drilled holes
of Top (A), .Side Panel (B) and (C)
Magnet
Wood Screw
B
C
Cam Lock Screw

I
STEP 3
STEP 4
Cam Lock Screw
Cam Lock
Figure 1
J
STEP 2
Attach Shelf (J) and Base (I) onto
Side Panel (B) with Cam Locks.
(see Figure 1)
B
H
G
D
E
F
C
Attach Stretcher (D), (E) and (F) to
the unit with Cam Locks.
Slide Back Panels (H) and (G)
into the unit.
Attach Side Panel (C) to
the unit with Cam Locks.
Assembly Instructions 3/6

Figure 2
Figure 3
N
N
M
A
STEP 5
K
L
Cam Lock
Wood Screws
for Back Panel
Steel Plate
Connecter
Assembly Instructions 4/6
Slide Media Box (N) and (M) into position.
Assemble Pull Handles to Doors (K) and (L)
with Machine Screws. (See figure 3)
Place Top (A) onto the unit,
using Cam Locks.
Attach Doors (K) and (L) by sliding the door lift hinges into the side panels lift hinges.
(See figure 2)
STEP 6
Insert 12X Wood Screws
from the back of the unit,
tighten up all the Wood Screws.
Place the assembled Hutch onto
Base unit, by using
Steel Plate Connecter and
Wood Screws as shown.
Note: Please make sure unit is level
before tightening these screws.
Wood Screw
for Steel Plate

Assembly Instructions 5/6
Figure 1
Figure 2
M2
M2
M1
M1
M1
M1
M3
M3
M3 M3
Part List
Figure 3
Attach M3 to M1, using
a and
wood screws ,
tighten halfway then
attach M1 to unit, using
wood screws ,
tighten halfway.
(see Figure 1)
Phillips screw driver
(4X)
(4X)
Insert wood screws (4X)
into the pre-drilled holes in M2,
tighten screws. (see Figure 3)
Slide M2 into the grooves in M1.
(see Figure 2)
STEP 2
STEP 3
Tighten all screws used in Media Box assembly.
STEP 1
Media Box (M)
M1.
Media Box
2 pcs.
M3.
Media Box
4 pcs.
M2.
Media Box
1 pc.

Assembly Instructions 6/6
Figure 1
Figure 2
N2
N2
N1
N1
N1
N1
N3
N3
N3
N3
Part List
Figure 3
Attach N3 to N1, using
a and
wood screws ,
tighten halfway then
attach N1 to unit, using
wood screws ,
tighten halfway.
(see Figure 1)
Phillips screw driver
(4X)
(4X)
Insert wood screws (4X)
into the pre-drilled holes in N2,
tighten screws. (see Figure 3)
Slide N2 into the grooves in N1.
(see Figure 2)
STEP 2
STEP 3
Tighten all screws used in Media Box assembly.
STEP 1
Media Box (N)
N1.
Media Box
4 pcs.
N2.
Media Box
2 pcs.
N3.
Media Box
8 pcs.