EefaCo.Store 88 5130 381 User manual

Unit Part List
88 5130 381
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
Hardware List
Hex Wrench
1 pc.
Head Cap Bolt
20 pcs. (+1 extra)
Cam Lock
18 pcs.(+1 extra)
Cam Lock Screw
18 pcs.(+1 extra)
Machine Screw
3 pcs.
A.
Top
1 pc.
Wood Screw
for Drawer
4 pcs. (+1 extra)
Wood Screw (long)
for Drawer
12 pcs. (+1 extra)
Pull Handle
3 pcs.
Adjustable Pin
16 pcs. (+2 extra)
O.
Base
1 pc.
Tools required for assembly : Phillips screwdriver
For assembly see instructions in carton 88 5130 382
Wood Screw
for Back Panel
12 pcs. (+1 extra)
Wine Cabinet
H.
Upper Back Stretcher
1 pc.
J.
Lower Back Stretcher
1 pc.
G.
Back Piece
2 pcs.
I.
Front Rail
1 pc.
Small
Hex Wrench
1 pc.

Part List (in this carton)
Also need the following from carton 88 5130 381 :
Hardware List in carton 88 5130 381
Cam Lock Screw 19 pcs.
Cam Lock 19 pcs.
Head Cap Bolt 21 pcs.
Adjustable Pin 18 pcs.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Part List in carton 88 5130 381
Top (A)
Back Piece (G)
Upper Back Stretcher (H)
Front Rail (I)
Lower Back Stretcher (J)
Base (O)
1 pc.
2 pcs.
1 pc.
1 pc.
1 pc.
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
(Knock-Down Construction, please refer to
the last page of these instructions for steps
to complete assembling drawers)
Wood Screw (long) for Drawer
Wood Screw for Drawer
Wood Screw for Back Panel
13 pcs.
5 pcs.
Hex Wrench 1 pc.
Pull Handle 3 pcs.
Hardware List in carton 88 5130 381
Machine Screw 3 pcs.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
F1.
Back Panel
2 pcs.
K.
Drawer
2 pcs.
L.
Fixed Shelf
2 pcs.
M.
Shelf
4 pcs. N.
Rack
1 pc.
P.
Leg
2 pcs.
Q.
Leg
1 pc.
R.
Door
1 pc.
S.
Door
1 pc.
T.
Glass
2 pcs.
U.
Drawer
1 pc.
13 pcs.
F2.
Back Panel
1 pc.
88 5130 382
D.
Middle Panel
1 pc.
E.
Middle Panel
1 pc.
Small Hex Wrench 1 pc.
Wine Cabinet

IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Assembly Instructions 2/5
Put Cam Lock Screws into the
pre-drilled holes of Side Panel
(B),(C), Middle Panel (D),(E),
Top (A) and tighten.
Attach Lower Back Stretcher (J) to Side Panel (B) with Cam Lock.
Attach Back Piece (G) to Lower Back Stretcher (J), then slide Back Panel (F1),(F2) into position.
Attach Upper Back Stretcher (H) to the unit with Cam Locks.
STEP 2
Cam Lock Screw
B
C
DEA
Cam Lock Screw
B
F1
F1
F2
H
G
G
J
Cam Lock
H
Cam Lock

C
O
P
P
Cam Lock
Head Cap Bolt
Cam Lock
Q
N
I
Assembly Instructions 3/5
STEP 3
Attach Fixed Shelf (L) to the Middle Panel (D)
and Middle Panel (E) using Cam Locks.
STEP 4
L
D
E
L
Cam Lock
Place unit in Step 3 onto the unit in step 2.
Attach Rack (N) to the unit with Head Cap Bolts.
Attach Front Rail (I) to the unit with Cam Locks and Head Cap Bolts.
Attach Side Panel (C) to the unit using Cam Locks.
Attach Base (O) to the unit Head Cap Bolts.
Attach Leg (P) to Base (O) with Head Cap Bolts.
Tighten up Leg (Q) in the pre-drilled hole of unit as shown.

Assembly Instructions 4/5
Wood Screw Wood Screw
R
S
T
T
STEP 5
Remove Wood Screw from Door (R) and (S).
Slide Glass (T) into the doors frame
Tighten Wood Screws as shown.
Turn the unit back to its
upright position.
Place Top (A) onto the unit with Head Cap Bolts
and Cam Locks.
Insert Adjustable Pins into the side panels and middle panels at the desired level.
Slide Shelf (M) into place.
Assemble Pull Handles to Door (R) and (S) with Machine Screws.(see Figure 1)
Attach Door (R) and (S) to the side panels by sliding the door lift hinges into the side panel
lift hinges. (see Figure 2)
Slide Drawer (U) into place.
A
M
M
R
S
U
M
M
(Figure 2)
(Figure 1)
STEP 6
Insert Wood Screws from the back
and tighten.
STEP 7
Adjustable Pin
Machine Screw
Head Cap Bolt
Wood Screw

Assembly Instructions 5/5
Figure 1
Figure 2
MAKE SURE ROLLER
IS ON THE BACK
U2
U2
U2
U3
U3
U3
U4
U4
U4
U5
U5
U1
U1
U1
Drawer (U)
Part List
U1.
Front Part
1 pc.
U5.
Base Part
1 pc.
U2.
Back Part
1 pc.
U3.
Side Part
1 pc.
Figure 3
Figure 4
Attach U1 to U3 and U4, using
a Phillips screwdriver and
long wood screws ,
tighten halfway.
Attach U2 to U3 and U4 using
long wood screws (4X),
tighten halfway. (see Figure 1)
(4X)
Insert short wood screws (6X)
into the pre-drilled holes in U5,
tighten screws. (see Figure 3)
Attach hardware pulls with
machine screws.
(see Figure 4)
Slide U5 into the grooves in U3
and U4. Be sure to push U5 all
the way forward so it meets U1.
(see Figure 2)
STEP 1
STEP 2
STEP 3
STEP 4
Tighten all screws used in
drawer assembly.
U4.
Side Part
1 pc.