EefaCo.Store Bedford 88 5531 17 User manual

88 5531 17
Bedford
Corner Lap Top Desk
PART LIST
HARDWARE LIST
Tools Required For Assembly : Phillips screwdriver
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Casual Attire For Today's Home
A.
Top Unit
1 pc.
Bolt
10 pcs. (+1 extra )
Flat Washer
10 pcs. (+1 extra )
Spring Washer
10 pcs. (+1 extra )
Key Wrench
1 pc.
Wood Screw
8 pcs.
B.
Leg
1 pc.
C.
Leg
1 pc.
D.
Leg
3 pcs.
F.
Stretcher
2 pcs.
E.
Stretcher
2 pcs.

Assembly Instruction
STEP 1
IMPORTANT
Do not tighten up all the screws until each part is properly assembled. You should keep Key Wrench in a safe place as you
may need to tighten up the Head Cap Bolts in the future.
Turn Top (A) upside down and
place it on a soft cloth.
Remove the drawer.
STEP 3
Turn the unit over to its’ upright position.
Slide the drawer into position
Remove the Pull Handle that is installed
on the inside of drawer and re-install
it on the outside of the drawer (see Figure 2).
.
Figure 2
Flat Washer
Spring Washer
Bolt
Key Wrench
Figure 1
Bolt
Spring Washer
Flat Washer
E
E
CBD
D
D
A
F
F
Wood Screw
A
STEP 2
Attach Legs (B), (C) and (D) to Top (A) with Flat
Washers, Spring Washers and Bolts, then tighten
the bolts half way (see Figure 1).
Attach Stretcher (E) and (F) to the unit with
Wood Screws.
Tighten up all bolts.