EefaCo.Store 88 5531 31 User manual

Hardware List
D.
Leg
4 pcs.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
B.
Top
1 pc.
C.
Leaf
1 pc.
E.
Table Slide
1 pc.
F.
Table Slide
1 pc.
Casual Attire For Today's Home
88 5531 31
The Bedford
Dining Table
Tools required for assembly : Phillips screwdriver
Bolt (long)
8 pcs. (+1 extra )
Bolt (short)
12 pcs. (+1 extra )
Flat Washer
20 pcs. (+1 extra )
Spring Washer
20 pcs. (+1 extra )
Key Wrench
1 pc.
Part List

Spring Washer
Flat Washer
Bolt
STEP 1
Assembly Instructions 2/3
AF
E
B
Attach Top (A) with (B), by aligning dowels
with the holes and firmly pushing together.
Engage the locks by turning their handles clockwise ¼ turn (see Figure 1).
Attach Table Slide (E) to the unit using Bolts (short), Spring Washers and Flat Washers.
Attach Table Slide (F) in the same manner.
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in the safe place as you may need to tighten up
the Bolts in the future.
(Figure 1)
(Figure 2)
Flat Washer
Spring Washer
Bolt
Key Wrench
D
D
D
D
Attach Legs (D) to the unit with Flat Washers, Spring Washers
and Bolts (long) (see Figure 2).
STEP 2

STEP 3
Assembly Instructions 3/3
C
Disengage the locks by turning their handles counter-clockwise ¼
turn (see Figure 3).
Pull out both sides of the table, then place Leaf (C) in the unit as shown,
aligning the dowels with the holes.
Push the table together firmly, then engage the locks by turning their handles clockwise ¼ turn
(see Figure 1).
Adding the Leaf
(Figure 3)