EefaCo.Store 88 5050 80 User manual

Hardware List
B.
Side Frame
1 pc.
C.
Side Frame
1 pc.
E.
Back Frame
1 pc
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Seat
1 pc.
88 5050 80
Oak Hill
Side Chair
Tools required for assembly : Phillips screwdriver
Part List
D.
Front Frame
1 pc.
Head Cap Bolt
8 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Wood Screw
4 pcs.(+1 extra)
Flat Washer
8 pcs. (+1 extra )
Spring Washer
8 pcs. (+1 extra )

Assembly Instructions
IMPORTANT
You should keep Hex Wrench in a safe place as you may need to tighten up
the Head Cap Bolts in the future.
STEP 1
Attach Side Frame (B) and (C)
with
Head Cap Bolts, Spring Washers
and Flat Washers.
(See figure 1)
to Back Frame (A)
C
Figure 2
STEP 2
STEP 3
Flat Washer
Spring Washer
Head Cap Bolt
Spring Washer
Head Cap Bolt
Flat Washer
Wood Screw
Attach Front Frame (D) to unit
with Head Cap Bolts, Spring Washers
and Flat Washers.
D
E
B
A
Place Seat (A) upside down
on a soft cloth.
Attach unit onto Seat (A)
with 4 Wood Screws.
Turn the unit to
its’ upright position.
(See Figure 2)
Figure 1