eka KF 912 IX User manual

USE AND INSTRUCTION MANUAL
USE AND INSTRUCTION MANUALUSE AND INSTRUCTION MANUAL
USE AND INSTRUCTION MANUAL
MODD.
MODD. MODD.
MODD. KF 937
KF 937KF 937
KF 937 –
––
– KF 937 UD
KF 937 UDKF 937 UD
KF 937 UD
KF 933
KF 933 KF 933
KF 933 –
––
– KF
KFKF
KF 933 U
933 U 933 U
933 U –
––
– KF
KFKF
KF 933 AL
933 AL 933 AL
933 AL –
––
– KF
KFKF
KF 933 AL
933 AL933 AL
933 AL U
U U
U
KF 912
KF 912 KF 912
KF 912 –
––
– KF 912 IX
KF 912 IXKF 912 IX
KF 912 IX
KF 965
KF 965 KF 965
KF 965 –
––
– KF
KFKF
KF 965 M
965 M 965 M
965 M –
––
– KF
KFKF
KF 965 AL
965 AL965 AL
965 AL UD
UDUD
UD –
––
– KF 966 UD
KF 966 UDKF 966 UD
KF 966 UD
rev.
rev. rev.
rev. 4
44
4
TECNOEKA
TECNOEKATECNOEKA
TECNOEKA S.r.l.
S.r.l.S.r.l.
S.r.l.
ia I. Nievo,
ia I. Nievo,ia I. Nievo,
ia I. Nievo, n.12/B
n.12/B n.12/B
n.12/B -
--
- 35012 Camposampiero (Padova) Italy
35012 Camposampiero (Padova) Italy35012 Camposampiero (Padova) Italy
35012 Camposampiero (Padova) Italy
Tel. [phone]
Tel. [phone] Tel. [phone]
Tel. [phone] –
––
– +39.049.5791
+39.049.5791+39.049.5791
+39.049.5791479 Fax [phone]
479 Fax [phone] Fax [phone]
479 Fax [phone]
www.tecnoeka.com
www.tecnoeka.comwww.tecnoeka.com
www.tecnoeka.com E
EE
E-
--
-mail:
mail: mail:
mail: [e-mail]
[e-mail]@tecnoeka.com
[e-mail]

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _
_ page 2 _________________________________________________________________________________________
Prodotti mirati
Prodotti miratiProdotti mirati
Prodotti mirati
per Ristorazioni, Pasticcerie,
per Ristorazioni, Pasticcerie,per Ristorazioni, Pasticcerie,
per Ristorazioni, Pasticcerie,
Panetterie e Gastronomie
Panetterie e GastronomiePanetterie e Gastronomie
Panetterie e Gastronomie
TECNOEKA Srl
TECNOEKA SrlTECNOEKA Srl
TECNOEKA Srl
ia I. Nievo, 12/B
35012 Camposampiero (PD)
Tel. [phone]
Fax + 39 049 5794387
www.tecnoeka.com – [e-mail]
CE DECLARATION OF CONFORMITY
Annexed document II A, of directive
Annexed document II A, of directive Annexed document II A, of directive
Annexed document II A, of directive 2006
20062006
2006/
//
/42
4242
42/
//
/EC
ECEC
EC
Manufacturer TECNOEKA Srl
TECNOEKA SrlTECNOEKA Srl
TECNOEKA Srl
Address ia I. Nievo, 12/B
ia I. Nievo, 12/B ia I. Nievo, 12/B
ia I. Nievo, 12/B -
--
- 35012 Camposampiero (Pd)
35012 Camposampiero (Pd)35012 Camposampiero (Pd)
35012 Camposampiero (Pd)
Type of product Electric ovens
Electric ovensElectric ovens
Electric ovens
Models
KF 937
KF 937KF 937
KF 937 –
––
– KF 937 UD
KF 937 UDKF 937 UD
KF 937 UD –
––
– KF
KFKF
KF 933
933 933
933 –
––
– KF 933 U
KF 933 U KF 933 U
KF 933 U –
––
– KF 933 AL
KF 933 AL KF 933 AL
KF 933 AL –
––
– KF
KFKF
KF 933 AL
933 AL933 AL
933 AL U
U U
U
KF 912
KF 912 KF 912
KF 912 –
––
– KF 912 IX
KF 912 IX KF 912 IX
KF 912 IX –
––
– KF 965
KF 965 KF 965
KF 965 –
––
– KF
KFKF
KF 965 M
965 M 965 M
965 M –
––
– KF 965 AL
KF 965 ALKF 965 AL
KF 965 AL UD
UDUD
UD –
––
– KF 966 UD
KF 966 UDKF 966 UD
KF 966 UD
TECNOEKA Srl declares that the above mentioned products conform to the safety
regulations under:
- Low voltage directive 2006/95/EC
CEI EN 60335-1
CEI EN 60335-2-42
- Electromagnetic compatibility Directive 2004/108/EC
CEI EN 55014-1
CEI EN 61000-3-2
CEI EN 61000-3-3
-
Machine Directive 2006/42/ EC;
-
Directive on the general safety of products 2001/95/ EC;
-
Directive on the restriction in the use of dangerous substances in electrical and
electronic appliances 2002/95/ EC;
-
Directive on waste from electrical and electronic appliances 2002/96/ EC.
Camposampiero, 17/02/2012.
__
____
_________________________________
______________________________________________________________
_______________________________
Signature of a Representative of the Board of directors
X:\Sgq\PRODOTTI\Fam. 1 - FORNI\FORNO ELETTRICO\LEka\MANUALI D'USO - Forno Elettrico
40 60 90 - LEka\Lingua Inglese\Instruction manual KF 937-KF937UD-KF933-KF933U-
KF933AL-KF933AL_U-KF912-KF912IX-KF965-KF965M-KF965AL_UD-KF966UD - GB - rev.
4.doc

_ Electric Ovens _ rev. 4__________________ KF 937 – KF 937 UD – KF 933 – KF 933 U – KF 933 AL – KF 933 AL U
KF 912 - KF 912 IX – KF 965 – KF 965 M – KF 965 AL UD – KF 966 UD _
_________________________________________________________________________________________ page 3 _
Index
IndexIndex
Index
1.
1.1.
1.
Technical service
Technical serviceTechnical service
Technical service
2.
2.2.
2.
General warnings
General warningsGeneral warnings
General warnings
3.
3.3.
3.
Technical specifications
Technical specificationsTechnical specifications
Technical specifications
4.
4.4.
4.
Instructions for the installer
Instructions for the installerInstructions for the installer
Instructions for the installer
5.
5.5.
5.
Use instructions (for the user)
Use instructions (for the user)Use instructions (for the user)
Use instructions (for the user)
6.
6.6.
6.
Residual risks (
Residual risks (Residual risks (
Residual risks (for the user)
for the user)for the user)
for the user)
7.
7.7.
7.
How to use the control panel
How to use the control panelHow to use the control panel
How to use the control panel
8.
8.8.
8.
Oven cooking
Oven cookingOven cooking
Oven cooking
9.
9.9.
9.
Cooking advice
Cooking adviceCooking advice
Cooking advice
10.
10.10.
10.
Routine cleaning and maintenance
Routine cleaning and maintenanceRoutine cleaning and maintenance
Routine cleaning and maintenance
11.
11.11.
11.
Technical
Technical Technical
Technical assistance
assistanceassistance
assistance
12.
12.12.
12.
Informations to the consumers
Informations to the consumersInformations to the consumers
Informations to the consumers
13.
13.13.
13.
Wiring layout
Wiring layoutWiring layout
Wiring layouts
ss
s
14.
14.14.
14.
The Warranty
The WarrantyThe Warranty
The Warranty

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _
_ page 4 _________________________________________________________________________________________
1.
1. 1.
1. Technical service
Technical serviceTechnical service
Technical service
A technical check-up once or twice a year helps prolong the life of the appliance and
guarantees better operation.
Make sure that assistance is carried out solely and exclusively by qualified personnel.
For any spare parts orders or for any information about the appliance, always mention the
serial number and model (data indicated on the "technical data" plate at the rear of the oven).
2
22
2.
. .
. General warnings
General warningsGeneral warnings
General warnings
ery important!: keep this instruction book together with the appliance for future
consultation.
These warnings were drafted for your safety and for that of others. Please read them carefully
before installing or using the appliance:
-If, on receipt of the goods, the packaging
packagingpackaging
packaging is damaged, write the following on the delivery
note: “I RE ERSE THE RIGHT TO CONTROL THE GOODS”
“I RE ERSE THE RIGHT TO CONTROL THE GOODS”“I RE ERSE THE RIGHT TO CONTROL THE GOODS”
“I RE ERSE THE RIGHT TO CONTROL THE GOODS”, specify the damage and get the
driver to sign in acceptance; send a claim in writing to the seller within 4 calendar days
from the date of receipt. No claim shall be accepted after such period.
-The warehouse inside temperature must not be lower than -9°C; otherwise, the
thermostat (regulation and safety thermostat) control devices of the machine will be
damaged. Failure to observe this prohibition invalidates any responsibility of the
manufacturer of the machine.
-The appliance is intended for professional use and must be utilised by qualified personnel
trained to use it.
-Any modification which may be necessary on the electrical system to enable installation of
the appliance, must be carried out solely by competent personnel.
-It is dangerous to modify or attempt to modify the characteristics of this appliance.
-Never clean the appliance with direct water jets, because, if any water enters, it could limit
the machine's safety .
-Before doing any maintenance or cleaning jobs, disconnect the appliance from the
electrical mains and allow it to cool.
-When the tilting door is wide open, do not put anything on the surface, because the door
hinges could be irreparably damaged .
-Do not attempt to carry out the periodic controls or any repairs by yourself. Contact the
nearest Service Centre and use only original spare parts.
N.B.:
N.B.: N.B.:
N.B.: Improper or incorrect use and failure to observe the installation instructions shall release the
Improper or incorrect use and failure to observe the installation instructions shall release the Improper or incorrect use and failure to observe the installation instructions shall release the
Improper or incorrect use and failure to observe the installation instructions shall release the
manufacture from all responsibility.
manufacture from all responsibility.manufacture from all responsibility.
manufacture from all responsibility. In this connection, the directives in the "POSITIONING"
In this connection, the directives in the "POSITIONING" In this connection, the directives in the "POSITIONING"
In this connection, the directives in the "POSITIONING"
paragraph must be strict
paragraph must be strictparagraph must be strict
paragraph must be strictly observed.
ly observed.ly observed.
ly observed.
3.
3. 3.
3. Technical specifications
Technical specificationsTechnical specifications
Technical specifications
Appliance
Appliance Appliance
Appliance
model
modelmodel
model
Cooking chamber
Cooking chamber Cooking chamber
Cooking chamber
ol.
ol.ol.
ol.
(dm³=It)
Convection heating
Convection heatingConvection heating
Convection heating
element
elementelement
element
(kW)
Grill heating
Grill heating Grill heating
Grill heating
element
elementelement
element
(kW)
Top and bottom
Top and bottom Top and bottom
Top and bottom
heatel
heatelheatel
heatel
(kW)
Motorised co
Motorised coMotorised co
Motorised co
nvection
nvectionnvection
nvection
ventilator
ventilatorventilator
ventilator
(W)
KF 937
KF 937KF 937
KF 937
KF 937 UD
KF 937 UDKF 937 UD
KF 937 UD 60
6060
60 3,5
3,53,5
3,5 /
//
/ /
//
/ 120
120120
120
KF 933
KF 933KF 933
KF 933
KF 9
KF 9KF 9
KF 933 U
33 U33 U
33 U
KF 933 AL
KF 933 ALKF 933 AL
KF 933 AL
KF 933
KF 933KF 933
KF 933 AL
ALAL
AL U
UU
U
87
8787
87 3,0
3,03,0
3,0 /
//
/ /
//
/ 120
120120
120
KF 912
KF 912 KF 912
KF 912
KF 912 IX
KF 912 IXKF 912 IX
KF 912 IX 93
9393
93 1
11
1,
,,
,6
66
6 /
//
/ /
//
/ 50
5050
50
KF 965
KF 965KF 965
KF 965
KF 965 AL
KF 965 ALKF 965 AL
KF 965 AL U
UU
UD
DD
D
KF 966 UD
KF 966 UDKF 966 UD
KF 966 UD
91
9191
91 3,0
3,03,0
3,0 /
//
/ /
//
/ 120
120120
120
KF 96
KF 96KF 96
KF 965 M
5 M5 M
5 M
78
7878
78
3,0
3,03,0
3,0
2
22
2
,
,,
,
5
55
5
3
33
3
,
,,
,
2
22
2
120
120120
120

_ Electric Ovens _ rev. 4__________________ KF 937 – KF 937 UD – KF 933 – KF 933 U – KF 933 AL – KF 933 AL U
KF 912 - KF 912 IX – KF 965 – KF 965 M – KF 965 AL UD – KF 966 UD _
_________________________________________________________________________________________ page 5 _
Appliance model
Appliance modelAppliance model
Appliance model
KF 937
KF 937KF 937
KF 937
KF 937 UD
KF 937 UDKF 937 UD
KF 937 UD
KF 933
KF 933 KF 933
KF 933
KF 933 U
KF 933 U KF 933 U
KF 933 U –
––
– KF 933 AL
KF 933 ALKF 933 AL
KF 933 AL
KF 933 AL
KF 933 AL KF 933 AL
KF 933 AL U
UU
U
KF 912
KF 912 KF 912
KF 912
KF 912 IX
KF 912 IXKF 912 IX
KF 912 IX
KF 965
KF 965KF 965
KF 965
KF 96
KF 96KF 96
KF 965 AL
5 AL5 AL
5 AL UD
UDUD
UD
KF 965
KF 965KF 965
KF 965 M
MM
M –
––
– KF 966 UD
KF 966 UDKF 966 UD
KF 966 UD
Max. absorbed power
Max. absorbed powerMax. absorbed power
Max. absorbed power
(kW) 3,7
3,73,7
3,7 6,4
6,46,4
6,4 3,4
3,43,4
3,4 6
66
6,4
,4,4
,4
Power supply voltage
Power supply voltagePower supply voltage
Power supply voltage
( ~)
220/230
220/230220/230
220/230 (50 Hz)
(50 Hz)(50 Hz)
(50 Hz)
380/400 2N
380/400 2N380/400 2N
380/400 2N
(50Hz)
(50Hz)(50Hz)
(50Hz)
220/230
220/230220/230
220/230 (50 Hz)
(50 Hz)(50 Hz)
(50 Hz) 380/400 2N
380/400 2N380/400 2N
380/400 2N (50Hz)
(50Hz)(50Hz)
(50Hz)
Class
ClassClass
Class
I (contro la scossa elettrica)
I (contro la scossa elettrica)I (contro la scossa elettrica)
I (contro la scossa elettrica)
Power cable
Power cablePower cable
Power cable diameter
diameterdiameter
diameter 3 x 1,5 mm
3 x 1,5 mm3 x 1,5 mm
3 x 1,5 mm² 4 x 2,5 m
4 x 2,5 m4 x 2,5 m
4 x 2,5 mm
mm
m² 3 x 1,5 mm
3 x 1,5 mm3 x 1,5 mm
3 x 1,5 mm² 4 x 2,5 mm
4 x 2,5 mm4 x 2,5 mm
4 x 2,5 mm²
Type of
Type ofType of
Type of c
cc
cable
ableable
able H07RN
H07RNH07RN
H07RN-
--
-F
FF
F
Connecting electric cable
Connecting electric cableConnecting electric cable
Connecting electric cable Type Y
Type YType Y
Type Y
Dimensions of appliance
Dimensions of applianceDimensions of appliance
Dimensions of appliance
(mm) LxDxH
790x665x505
790x665x505790x665x505
790x665x505 790x665x635
790x665x635790x665x635
790x665x635 9
99
90
00
00x680x5
0x680x50x680x5
0x680x57
77
70
00
0
90
9090
900x680x5
0x680x50x680x5
0x680x57
77
70
00
0 (KF 965 ..)
(KF 965 ..)(KF 965 ..)
(KF 965 ..)
790x665x635 (KF 966 UD)
790x665x635 (KF 966 UD)790x665x635 (KF 966 UD)
790x665x635 (KF 966 UD)
Weight of appliance
Weight of applianceWeight of appliance
Weight of appliance
(Kg)
45
4545
45 61
6161
61/62/58/59
/62/58/59/62/58/59
/62/58/59 5
55
53
33
3 58/56
58/5658/56
58/56/6
/6/6
/60
00
0/56
/56/56
/56
The noise level of the appliance in operation is below 70 dB (A).
The noise level of the appliance in operation is below 70 dB (A).The noise level of the appliance in operation is below 70 dB (A).
The noise level of the appliance in operation is below 70 dB (A).
The "technical data" plate is positioned on the rear panel of the appliance.
The "technical data" plate is positioned on the rear panel of the appliance.The "technical data" plate is positioned on the rear panel of the appliance.
The "technical data" plate is positioned on the rear panel of the appliance.
4.
4. 4.
4. Instructions for the installer
Instructions for the installerInstructions for the installer
Instructions for the installer
The following instructions are aimed at the qualified installer, to ensure that he carries out the
installation, adjustment and maintenance operations as correctly as possible and according to
current legal regulations. Any operation must be performed with electrical power cut to the
appliance.
Before using the appliance, carefully remove the special adhesive film protecting the parts in
stainless steel. Do not leave any glue residues on the surfaces. If necessary, remove them at once,
with an appropriate solvent.
Fitting the feet
Fitting the feetFitting the feet
Fitting the feet - The feet are inside the appliance and must be secured on the four threaded
holes on the base. If necessary, the height of the feet can be adjusted by screwing or unscrewing.
Positioning
PositioningPositioning
Positioning - Position the appliance perfectly horizontally on a table or similar support (the
table or support must be at least 85 cm above the floor). Position it at a distance of not less than
10 cm from the side and rear walls, to enable natural ventilating air to circulate freely around it.
The appliance is ventilated through specific openings on the metal walls of the outer housing ,
and ensures efficiency and long-life. For this reason it is strictly forbidden to obstruct these
ventilation openings, even partially or for short periods. Failure to observe this specific prohibition
Failure to observe this specific prohibition Failure to observe this specific prohibition
Failure to observe this specific prohibition
releases the manufacturer of the appliance fro
releases the manufacturer of the appliance froreleases the manufacturer of the appliance fro
releases the manufacturer of the appliance from all responsibility and immediately voids any
m all responsibility and immediately voids any m all responsibility and immediately voids any
m all responsibility and immediately voids any
guarantee rights for the said appliance,
guarantee rights for the said appliance, guarantee rights for the said appliance,
guarantee rights for the said appliance, because its constructive conformity has been voluntarily
compromised. Furthermore, the appliance is not suitable for embedding and for grouped
positioning with other identical appliances.
Electrical connection
Electrical connectionElectrical connection
Electrical connection - The appliance must be connected to the electrical mains according to
current legal regulations. Before making the connection, make sure of the following:
-the voltage and frequency values of the power supply system match the values on the
"technical data" plate affixed on the appliance;
-the limiting valve and the system are able to support the appliance's load (see the
"technical data" plate);
-the power supply system has an adequate earth connection according to cu
the power supply system has an adequate earth connection according to cuthe power supply system has an adequate earth connection according to cu
the power supply system has an adequate earth connection according to current legal
rrent legal rrent legal
rrent legal
regulations;
regulations;regulations;
regulations;
-a omnipolar switch with minimum between-contacts aperture of the overvoltage category
III (4000 ), sized to the load and conforming to current legal regulations, is fitted
between the appliance and the mains in the direct connection to the mains;
-the omnipolar switch used for connection is easy to reach when the appliance is installed;
-the yellow/green earth wire is not interrupted by the switch;
the yellow/green earth wire is not interrupted by the switch;the yellow/green earth wire is not interrupted by the switch;
the yellow/green earth wire is not interrupted by the switch;
-the power supply, when the appliance is operating, must not deviate from the rated
voltage value by ±10%;

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _
_ page 6 _________________________________________________________________________________________
-make sure that after inserting the power supply cord into the terminal block it does not
come into contact with any of the cooking range's hot parts.
-if the supply cable is damaged then it must be replaced by the manufacturer or by your
if the supply cable is damaged then it must be replaced by the manufacturer or by yourif the supply cable is damaged then it must be replaced by the manufacturer or by your
if the supply cable is damaged then it must be replaced by the manufacturer or by your
technical support or by a qualified person to avoid any risk.
technical support or by a qualified person to avoid any risk.technical support or by a qualified person to avoid any risk.
technical support or by a qualified person to avoid any risk.
Connection to the water mains
Connection to the water mainsConnection to the water mains
Connection to the water mains - The appliance must be fed with softened drinking water,
with hardness from 0.5°F to 5°F (it is obligatory to use a softener to reduce the formation of lime
inside the cooking chamber) and pressure in the range from 150 to 250 kPa (1.5 - 2.5 bar).
Connection to the water mains should be made through the threaded 3/4" solenoid-valve on
the rear (on the bottom) of the appliance, fitting in between a mechanical filter and an on/off tap
(before you connect the filter, allow a certain quantity of water to flow out in order to drain any
waste from the pipe).
Connecting the power cable
Connecting the power cableConnecting the power cable
Connecting the power cable - To access the terminal board, just remove the appliance's rear
side-panel. Loosen the cable gripper and allow the cable to pass through it. Arrange the
conductors so that the earth conductor is the last to detach from its terminal if the cable goes
into a state of faulty traction. Connect the phase
phasephase
phase conductors to the terminals marked “L1”
“L1”“L1”
“L1” and
“L2”
“L2”“L2”
“L2”, connecting the neutral
neutral neutral
neutral conductor to the terminal marked "N"
"N""N"
"N" and the earth
earthearth
earth conductor to
the terminal marked with the symbol according to the following lay-out:
(this electrical connection lay-out is located near the power supply terminal board ). Tighten the
cable gripper and re-fit the rear side-panel of the appliance.
The appliance must be connected to an equipotential system
equipotential systemequipotential system
equipotential system whose efficiency must first be
checked according to current legal regulations.
This connection must be made between different appliances by using the appropriate terminal
marked with the symbol . The equipotential conductor must have a minimum diameter of 2,5
mm
2
The equipotential terminal is at the rear of the appliance.
Safety thermal brea
Safety thermal breaSafety thermal brea
Safety thermal breaker
kerker
ker - The appliance has a manually reset safety thermal breaker. It protects
against excessive dangerous over-temperatures which could be accidentally generated inside the
appliance. This device is located on the back of the oven.
5.
5. 5.
5. Use instructions (for
Use instructions (forUse instructions (for
Use instructions (for the user)
the user)the user)
the user)
This appliance is not intended for use by persons (including children) with reduced phycal,
sensory or mental capabilities, or lack of experience and knowledge. Unless they have beengiven
supervision or instruction concerning use of appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
For first use, we advise you to let the appliance to run load-free at maximum temperature for
about one hour. In this way, any unpleasant smells due to thermal insulation and residual work
grease are eliminated.
This appliance must be used solely for the purpose for which it was expressly designed, i.e.
cooking foods in the oven. Any other use is considered unsuitable.
The appliance can be used: for all oven cooking of deserts, pizzas, meat, fish, vegetables, as
well as for gratinating, and for re-conditioning cooled and frozen foods.
When placing food in the cooking compartment, leave a space of at least 40 mm between
pans in order not to over-obstruct air circulation.

_ Electric Ovens _ rev. 4__________________ KF 937 – KF 937 UD – KF 933 – KF 933 U – KF 933 AL – KF 933 AL U
KF 912 - KF 912 IX – KF 965 – KF 965 M – KF 965 AL UD – KF 966 UD _
_________________________________________________________________________________________ page 7 _
Do not use pans with higher than necessary edges: edges are barriers which prevent the
circulation of hot air.
Warm up the oven before every cooking operation to obtain maximum uniformity.
Do not salt foods in the cooking compartment.
6.
6. 6.
6. Residual risks (for the user)
Residual risks (for the user)Residual risks (for the user)
Residual risks (for the user)
After a cooking operation, open the door cautiously, to avoid a violent outflow of heat which
could cause burns.
While the oven is in operation, pay attention to the hot zones (marked on the appliance) of its
external surfaces.
Place the machine on a bench or similar support, at a height of at least 85 cm from the floor.
The bench or support must be able to support the weight of the machine and house it
correctly.
The appliance contains electrical parts and must never be washed with a jet of water or steam.
The appliance is electrically connected: before attempting any cleaning operation, cut power
to the appliance.
To prevent incorrect connection of the appliance, the relevant electrical and water connections
are marked by identification plates.
Do not use the door handle to move the appliance (the glass panel may break).
When the tilting door is wide open, do not use the internal surface to place objects to avoid
damaging permanently the door hinges.
7.
7. 7.
7. How
How How
How to use the control panel
to use the control panelto use the control panel
to use the control panel
KF 96
KF 96KF 96
KF 96
5 M
5 M5 M
5 M
KF 912
KF 912 KF 912
KF 912
–
––
–
KF 912 IX
KF 912 IXKF 912 IX
KF 912 IX
KF 965
KF 965KF 965
KF 965
KF 965 AL
KF 965 ALKF 965 AL
KF 965 AL UD
UDUD
UD
KF 937
KF 937 KF 937
KF 937 -
--
- KF 937 UD
KF 937 UD KF 937 UD
KF 937 UD -
--
- KF 933
KF 933 KF 933
KF 933 -
--
- KF 933 U
KF 933 UKF 933 U
KF 933 U -
--
- KF 933 AL
KF 933 AL KF 933 AL
KF 933 AL -
--
- KF 933 AL
KF 933 ALKF 933 AL
KF 933 AL U
UU
U -
--
- KF 966 UD
KF 966 UDKF 966 UD
KF 966 UD
1.
Control thermostat
knob
2.Functions selector
knob
3."End of cooking"
programming knob
4.Humidifier key
5.Line switch key
(ON/OFF Key)
6.Control thermostat
indicator light
7."End of cooking"
programmer
indicator light
8.Power line indicator
light

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _
_ page 8 _________________________________________________________________________________________
Fig. 1
Fig. 1Fig. 1
Fig. 1
Fig. 2
Fig. 2Fig. 2
Fig. 2 Fig. 3
Fig. 3Fig. 3
Fig. 3
Programming cooking time
Programming cooking timeProgramming cooking time
Programming cooking time - To run the oven, turn the programmer knob (Fig. 1) in line with
symbol (continuous operation) or in line with the selected cooking time (up to 120 minutes). In
the second case, end of cooking is signalled by the oven switching OFF automatically.
Programming cooking temperature
Programming cooking temperatureProgramming cooking temperature
Programming cooking temperature - Turn the knob of the adjustment thermostat (Fig. 2) in
line with the temperature selected for cooking.
Line key (ON/OFF)
Line key (ON/OFF)Line key (ON/OFF)
Line key (ON/OFF) - To electrically power up the appliance, press the key of the line switch to
"ON". In this state, the oven is ready to operate.
Humidi
HumidiHumidi
Humidifier key
fier keyfier key
fier key - To produce vapour inside the oven while the oven is operating and the
chamber is hot, press the key (commanding the humidifier) for a few seconds.
Control thermostat indicator light
Control thermostat indicator lightControl thermostat indicator light
Control thermostat indicator light - The control thermostat orange indicator light goes OFF
whenever the programmed temperature is reached inside the cooking compartment. It lights up
again when the thermostat is tripped to re-establish this temperature.
"End of cooking" programmer indicator light
"End of cooking" programmer indicator light"End of cooking" programmer indicator light
"End of cooking" programmer indicator light - The programmer orange indicator light indicate
that the oven is operating and that cooking time is active.
Line indicator light
Line indicator lightLine indicator light
Line indicator light - The green line-indicator light indicates that the oven is electrically
connected to the power supply line.
Oven internal light
Oven internal lightOven internal light
Oven internal light - The light is always on when the oven is operating.
To switch off the oven
To switch off the ovenTo switch off the oven
To switch off the oven - Turn OFF the knobs of the "end of cooking" programmer and of the
thermostat and press the line switch key to "OFF". When you have finished using the oven, shut
off the water ON/OFF tap upstream of the appliance and cut out electric power.
8
88
8.
..
. Oven cooking
Oven cookingOven cooking
Oven cooking
For cooking, before putting food in, warm up the oven to the required temperature. When the
oven reaches the temperature, put the food in and check cooking time. Switch off the oven 5
minutes before the theoretical time in order to recover stored heat.
MODD. KF 937
MODD. KF 937 MODD. KF 937
MODD. KF 937 –
––
– KF 933
KF 933 KF 933
KF 933 –
––
– KF 933 AL
KF 933 ALKF 933 AL
KF 933 AL
Convection cooking
Convection cookingConvection cooking
Convection cooking - Activate the oven and turn the thermostat knob in line with the required
temperature.
Defreezing
DefreezingDefreezing
Defreezing - Activate the oven and turn the thermostat knob to the OFF position.
MODD.
MODD.MODD.
MODD. KF 937 UD
KF 937 UD KF 937 UD
KF 937 UD -
--
- KF 933 U
KF 933 U KF 933 U
KF 933 U -
--
- KF 933 AL
KF 933 ALKF 933 AL
KF 933 AL U
U U
U -
--
- KF 912
KF 912 KF 912
KF 912 -
--
- KF 912 IX
KF 912 IX KF 912 IX
KF 912 IX -
--
- KF 965
KF 965 KF 965
KF 965 -
--
- KF 965 AL
KF 965 ALKF 965 AL
KF 965 AL UD
UDUD
UD -
--
- KF 966 UD
KF 966 UDKF 966 UD
KF 966 UD
Convection cooking
Convection cookingConvection cooking
Convection cooking - Activate the oven and turn the thermostat knob in line with the required
temperature.
Defreezing
DefreezingDefreezing
Defreezing - Activate the oven and turn the thermostat knob to the OFF position.
Humidification
HumidificationHumidification
Humidification (no for this models. KF 937
(no for this models. KF 937 (no for this models. KF 937
(no for this models. KF 937 –
––
– KF 933
KF 933 KF 933
KF 933 –
––
– KF 933 AL)
KF 933 AL)KF 933 AL)
KF 933 AL) While the oven is functioning
press the humidification botton to generate steam in the already heated cooking chamber.
(Humidifier key
only for Modd. KF 937 UD
KF 933U – KF 933 AL U – KF 966 UD)

_ Electric Ovens _ rev. 4__________________ KF 937 – KF 937 UD – KF 933 – KF 933 U – KF 933 AL – KF 933 AL U
KF 912 - KF 912 IX – KF 965 – KF 965 M – KF 965 AL UD – KF 966 UD _
_________________________________________________________________________________________ page 9 _
MOD. KF 965 M
MOD. KF 965 MMOD. KF 965 M
MOD. KF 965 M
Traditional cooking
Traditional cookingTraditional cooking
Traditional cooking - Switch on the oven. Turn the knob of the functions selector (Fig. 3) to
symbol and the thermostat knob in line with the required temperature If you want a different
temperature at the top or bottom, turn the functions selector knob in line with the symbol or
.
Cooking with the grill
Cooking with the grillCooking with the grill
Cooking with the grill - Switch on the oven. Turn the functions selector knob to and the
thermostat knob in line with the required temperature ( IMPORTANT
IMPORTANTIMPORTANT
IMPORTANT: grill cooking must be done
with the oven door closed ).
Cooking with the ventilated grill
Cooking with the ventilated grillCooking with the ventilated grill
Cooking with the ventilated grill - Switch on the oven. Turn the functions selector knob to
symbol and the thermostat knob in line with the required temperature ( IMPORTANT
IMPORTANTIMPORTANT
IMPORTANT: grill
cooking must be done with the oven door closed ).
entilated traditional cooking
entilated traditional cookingentilated traditional cooking
entilated traditional cooking - Switch on the oven. Turn the functions selector knob to
symbol and the thermostat knob in line with the required temperature.
Convection cooking
Convection cookingConvection cooking
Convection cooking - Switch on the oven. Turn the functions selector knob to symbol and
the thermostat knob in line with the required temperature.
Defreezing
DefreezingDefreezing
Defreezing - Switch on the oven. Turn the functions selector knob to symbol and the
thermostat knob to its OFF position.
Humidification
HumidificationHumidification
Humidification - While the oven is functioning press the humidification botton to generate
steam in the already heated cooking chamber.
9.
9.9.
9. Cooking advice
Cooking adviceCooking advice
Cooking advice
Tr
TrTr
Traditional cooking
aditional cookingaditional cooking
aditional cooking - Heat is supplied from above and below and, therefore, it is preferable to
use the central guides. If cooking requires extra heat from above and below, use the top or
bottom guides.
Convection cooking
Convection cookingConvection cooking
Convection cooking - Heat is transferred to the foods by pre-heated air, forced to circulate by
in the cooking chamber. The heat quickly and uniformly reaches all parts of the chamber,
enabling simultaneous cooking of different types of food (providing they have the same cooking
temperature), placed on the shelves without mixing tastes and smells. Convection cooking is
particularly convenient for rapid defreezing, and for sterilising preserves and drying mushrooms
and fruit.
Cooking with the grill
Cooking with the grillCooking with the grill
Cooking with the grill - Grilling is effected by the thermal radiation of an incandescent
electrical heating-element. The temperature produced by the infra-red rays is very high and one-
way (downward from above), and, therefore, food surfaces are immediately browned.
Cooking with
Cooking with Cooking with
Cooking with the ventilated grill
the ventilated grillthe ventilated grill
the ventilated grill - Forced circulation of air is combined with thermal radiation
produced by the grill, and this allows heat to gradually penetrate the inside of the food without
burning the surface.
Cooking desserts
Cooking dessertsCooking desserts
Cooking desserts - Desserts require a very high temperature (usually from 150 to 200°C) and a
pre-heated oven (about ten minutes). The oven door must not be opened until at least 3/4 of the
cooking time has elapsed. Whipped dough must be difficult to detach from a spoon because
excessive fluidity would prolong cooking time to no avail.
Cooking meat
Cooking meatCooking meat
Cooking meat - Meat to be cooked should weight at least 1 Kg to prevent it drying too much.
ery tender red meats to be cooked rare, which must be cooked on the outside to keep all their
gravy, require short cooking time at high temperature (200-250°C). The gravy ingredients must
be placed immediately in the pan only if the cooking temperature is brief, otherwise they should
be added during the last half-hour. You can check the degree of cooking by squashing the meat
with a spoon: if the meat does not yield, it is correctly cooked. For roast beef and fillet, which
must remain pink inside, cooking time must be very brief. Meats may be placed on a plate

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _
_ page 10 _________________________________________________________________________________________
suitable for oven cooking or directly on the grill, under which you should place a tray to collect
the gravy. When cooking has finished, we advise you to wait for 15 minutes before cutting the
meat so that the gravy does not come out. Before being served, the dishes may be kept hot in
the oven at minimum temperature.
Grilling
GrillingGrilling
Grilling - Almost all meats may be grilled, with the exception of some lean game meats and
meat loaves. Apply a little oil on the meat or fish to be cooked and always place them on the grill
- put the grill in the guides nearest or furthest from the grill heating element in proportion to the
meat, in order to avoid burning the surface and cooking the inside insufficiently. It is useful to
place a tray under the grill to collect drops of gravy and fat.
10.
10. 10.
10. Routine cleaning and maintenance
Routine cleaning and maintenanceRoutine cleaning and maintenance
Routine cleaning and maintenance
(WARNING:
(WARNING:(WARNING:
(WARNING: Cut power to the appliance before every operation)
Cut power to the appliance before every operation)Cut power to the appliance before every operation)
Cut power to the appliance before every operation)
General cleaning
General cleaningGeneral cleaning
General cleaning - Clean the oven when it is cold. Wash enamelled parts with lukewarm water
and soap, do not use abrasive products, steel wool, or acids, which could ruin them. To clean the
steel parts, do not use products containing chlorine (sodium hypochlorite, hydrochloric acid, etc)
even if diluted. Use specific off-the-shelf products or a little hot vinegar. Rinse thoroughly with
water and dry with a soft cloth. Clean the glass door of the oven with hot water only, and do not
use rough cloths. Do not allow foods (especially acid foods such as salt, vinegar, lemon, etc) to
stagnate on the stainless steel parts, because they could deteriorate. Do not wash the appliance
with direct jets of water, because if water enters, this could limit the appliance's safety. Do not
use corrosive substances (e.g. hydrochloric acid) to clean the oven' s support bench.
Cleaning the oven
Cleaning the ovenCleaning the oven
Cleaning the oven - It is good practice to clean the oven interior at the end of every day of
duty. In this way it will be easier to remove cooking residues, preventing them from burning
when the oven is next used. Clean it accurately with hot water and soap or with the appropriate
off-the-shelf products.
Cleaning the oven door
Cleaning the oven doorCleaning the oven door
Cleaning the oven door (except MODD. KF 933 AL - KF 933 AL U - KF 937 UD - KF 965 AL UD
- KF 966 UD) - To clean the oven door thoroughly, proceed as follows:
-fully open the door;
-attach the rings “A” onto the hinge seats (Fig. 4);
-lift the door gently and withdraw it (Fig. 5).
Fig. 4
Fig. 4Fig. 4
Fig. 4
Fig. 5
Fig. 5Fig. 5
Fig. 5
Fig. 6
Fig. 6Fig. 6
Fig. 6
(MODD
(MODD(MODD
(MODD. KF 937 UD
. KF 937 UD . KF 937 UD
. KF 937 UD –
––
– KF 966 UD)
KF 966 UD)KF 966 UD)
KF 966 UD)
- To clean the oven door thoroughly, proceed as follows:
-fully open the door;
-insert the equipped plugs in the “A” holes on the hinges (Fig. 7);
-lift the door gently and withdraw it (Fig. 8);
-put back the door in the initial position by operating inverserly.

_ Electric Ovens _ rev. 4__________________ KF 937 – KF 937 UD – KF 933 – KF 933 U – KF 933 AL – KF 933 AL U
KF 912 - KF 912 IX – KF 965 – KF 965 M – KF 965 AL UD – KF 966 UD _
_________________________________________________________________________________________ page 11 _
Fig. 7
Fig. 7Fig. 7
Fig. 7
Fig. 8
Fig. 8Fig. 8
Fig. 8
Replacing oven lamp
Replacing oven lampReplacing oven lamp
Replacing oven lamp - Electrically switch off the appliance; unscrew the protective glass cap
(Fig. 6);
(except MODD. KF 937 UD – KF 965 AL UD – KF 966 UD) unscrew the lamp and replace it
with another lamp suitable for high temperatures (300°C), with the following characteristics:
-oltage 230/240
-Power 15 W
-Fitting E 14
Refit the glass cap and power up the appliance.
(Only for the models KF 937 UD – KF 965 AL UD – KF 966 UD) remove the faulty halogen lamp
and insert the new one by using paper or cloth to not touch the lamp with bare hands.
Please note that the new halogen lamp must have the same characteristics as the one removed.
Put back the lamp cover with the gaskets and turn on the electricity.
11
1111
11.
..
. Technical
Technical Technical
Technical assistance
assistanceassistance
assistance
Before leaving the factory, the appliance was completely regulated and tested by expert
specialised personnel to guarantee the best operating results.
All repairs and settings must be performed with utmost care and attention, respecting national
safety regulations in force. Always contact your retailer or our nearest Service Centre, giving
details of the problem, the appliance model and the serial number (on the rating plate on the
rear panel).
For any maintenance the user can contact Tecnoeka by calling the telephone numbers on the
cover or going to www.tecnoeka.com
www.tecnoeka.comwww.tecnoeka.com
www.tecnoeka.com.
1
11
12
22
2.
. .
. Informations to the consumers
Informations to the consumersInformations to the consumers
Informations to the consumers
Further to Directive 2002/96/EC, the symbol of the crossed rubbish skip on
the appliance means that at the end of its life, the product must be disposed
of separately from the other rubbish. The user must hand the appliance to a
specialised waste collection centre for electric and electronic equipment.
The separate collection of the rubbish and subsequent treatment, recovery and disposal help to
produce other equipment using recycled materials, reducing the negative effects on the
environment and public health, which would be caused by incorrect management of the
rubbish.
Should the user dispose of the product abusively, administrative sanctions would be applied.
A

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _
_ page 12 _________________________________________________________________________________________
1
11
13
33
3.
. .
. Wiring
Wiring Wiring
Wiring layouts
layoutslayouts
layouts
MOD. KF 937
MOD. KF 937MOD. KF 937
MOD. KF 937
Key
KeyKey
Key
M Power terminal board
P "End of cooking" programmer
MI Door microswitch
T1 Safety thermostat
T2 Control thermostat
R Circular heating-element
L1-L2 Lighting lamps
Radial motoventilator
C Capacitor
IM Operating direction reversing element
B Contactor coil
S1 Power line indicator light
S2 Thermostat indicator light

_ Electric Ovens _ rev. 4__________________ KF 937 – KF 937 UD – KF 933 – KF 933 U – KF 933 AL – KF 933 AL U
KF 912 - KF 912 IX – KF 965 – KF 965 M – KF 965 AL UD – KF 966 UD _
_________________________________________________________________________________________ page 13 _
MOD. KF 937
MOD. KF 937 MOD. KF 937
MOD. KF 937 UD
UDUD
UD
Key
KeyKey
Key
M Power terminal board
P "End of cooking" programmer
MI Door microswitch
T1 Safety thermostat
T2 Control thermostat
IU Humidifier switch
E Humidifier solenoid-valve
L1-L2 Lighting lamps
R1 Circular heating-element
Radial motoventilator
C Capacitor
IM Operating direction reversing element
B Contactor coil
S1 Power line indicator light
S2 Thermostat indicator light

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _
_ page 14 _________________________________________________________________________________________
M
MM
MOD
ODOD
ODD
DD
D. KF 933
. KF 933. KF 933
. KF 933 –
––
– KF 933 AL
KF 933 ALKF 933 AL
KF 933 AL
Key
KeyKey
Key
M
Power terminal board
P "End of cooking" programmer
MI Door microswitch
T1 Safety thermostat
T2 Control thermostat
R1-R2 Circular heating-elements
L1-L2 Lighting lamps
1
-
2
Radial
motoventilators
C1-C2 Capacitors
IM Operating direction reversing element
B Contactor coil
S1 Programmer indicator light
S2 Thermostat indicator light
MOD
MODMOD
MODD
DD
D. KF 933 U
. KF 933 U. KF 933 U
. KF 933 U –
––
– KF 933 AL
KF 933 ALKF 933 AL
KF 933 AL U
UU
U
Key
KeyKey
Key
M
Power terminal board
P "End of cooking" programmer
MI Door microswitch
T1 Safety thermostat
T2 Control thermostat
E Humidifier solenoid-valve
IU Humidifier switch
L1-L2 Lighting lamps
R1
-
R2
Circular heating
-
elements
1- 2 Radial motoventilators
C1-C2 Capacitors
IM Operating direction reversing element
B Contactor coil
S1 Programmer indicator light
S2 Thermostat indicator light

_ Electric Ovens _ rev. 4__________________ KF 937 – KF 937 UD – KF 933 – KF 933 U – KF 933 AL – KF 933 AL U
KF 912 - KF 912 IX – KF 965 – KF 965 M – KF 965 AL UD – KF 966 UD _
_________________________________________________________________________________________ page 15 _
MODD. KF 912
MODD. KF 912 MODD. KF 912
MODD. KF 912 –
––
– KF 912 IX
KF 912 IXKF 912 IX
KF 912 IX
Key
KeyKey
Key
M Power terminal board
P "End of cooking" programmer
MI Door microswitch
T1 Safety thermostat
T2 Control thermostat
IU Humidifier switch
IL Power line switch
L1-L2 Lighting lamps
R1-R2 Circular heating elements
1- 2 Radial motoventilators
E Water solenoid-valve
B Contactor coil
S1 Power line indicator light
S2 Programmer indicator light
S3 Thermostat indicator light

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _
_ page 16 _________________________________________________________________________________________
MOD. KF 965
MOD. KF 965MOD. KF 965
MOD. KF 965
Key
KeyKey
Key
M Power terminal board
P "End of cooking" programmer
MI Door microswitch
T1 Safety thermostat
T2 Control thermostat
IU Humidifier switch
R1-R2 Circular heating elements
IL Power line switch
L1-L2 Lighting lamps
1- 2 Radial motoventilators
E Water solenoid-valve
B Contactor coil
S1 Power line indicator light
S2 Programmer indicator light
S3 Thermostat indicator light
C1-C2 Capacitors
IM Operating direction reversing element

_ Electric Ovens _ rev. 4__________________ KF 937 – KF 937 UD – KF 933 – KF 933 U – KF 933 AL – KF 933 AL U
KF 912 - KF 912 IX – KF 965 – KF 965 M – KF 965 AL UD – KF 966 UD _
_________________________________________________________________________________________ page 17 _
MOD. KF 965
MOD. KF 965 MOD. KF 965
MOD. KF 965 AL
AL AL
AL UD
UDUD
UD
Key
KeyKey
Key
M Power terminal board
P "End of cooking" programmer
MI Door microswitch
T1 Safety thermostat
T2 Control thermostat
IU Humidifier switch
R1-R2 Circular heating elements
IL Power line switch
L1 Lighting lamps
1- 2 Radial motoventilators
E Water solenoid-valve
B Contactor coil
S1 Power line indicator light
S2 Programmer indicator light
S3 Thermostat indicator light
C1-C2 Capacitors
IM Operating direction reversing element

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _
_ page 18 _________________________________________________________________________________________
MOD. KF 965 M
MOD. KF 965 MMOD. KF 965 M
MOD. KF 965 M
Key
KeyKey
Key
M Power terminal board
P "End of cooking" programmer
MI Door microswitch
T1 Safety thermostat
T2 Control thermostat
IU Humidifier switch
C Switch
R1-R2 Circular heating elements
R3 Grill heating element
R4 Lower heating element
R5 Upper heating element
L1-L2 Lighting lamps
1- 2 Radial motoventilators
E Humidifier solenoid-valve
B1 Contactor coil
B-B2 Relay coil
S1 Power line indicator light
S2 Programmer indicator light
S3 Thermostat indicator light
C1-C2 Capacitors
IM Operating direction reversing element

_ Electric Ovens _ rev. 4__________________ KF 937 – KF 937 UD – KF 933 – KF 933 U – KF 933 AL – KF 933 AL U
KF 912 - KF 912 IX – KF 965 – KF 965 M – KF 965 AL UD – KF 966 UD _
_________________________________________________________________________________________ page 19 _
MOD. KF 96
MOD. KF 96MOD. KF 96
MOD. KF 966
66
6 UD
UDUD
UD
Key
KeyKey
Key
M Power terminal board
P "End of cooking" programmer
MI Door microswitch
T1 Safety thermostat
T2 Control thermostat
R1-R2 Circular heating elements
E Humidifier solenoid-valve
IU Humidifier switch
1- 2 Radial motoventilators
C1-C2 Capacitors
IM Operating direction reversing element
B Contactor coil
S1 Programmer indicator light
S2 Thermostat indicator light
L Lighting lamp

_ TECNOEKA Srl _________________________________________________________ use and instruction manual _
_ page 20 _________________________________________________________________________________________
1
11
14
44
4.
. .
. The Warranty
The WarrantyThe Warranty
The Warranty
Your appliance is covered by warranty. The seller will replace or repair (and his decision will be final),
free of charge for the customer, only those parts that are defective due to a manufacturing fault on
condition that, under penalty of forfeiture:
−for domestic equipment, the customer notifies the fault within two months from the date when
he/she discovered it and anyway within 2 years form the date of purchase;
−for professional equipment, the customer notifies the fault within 8 days from the date when
he/she discovered it and anyway within 12 months from the date of purchase,
by registered letter with acknowledgement of receipt and enclosing the invoice or receipt proving the
purchase.
Apart from the case when the customer cannot produce the invoice or receipt proving the purchase or
when the above-mentioned terms are not complied with, the warranty is expressly excluded
warranty is expressly excluded warranty is expressly excluded
warranty is expressly excluded in the
following cases:
1) faults or breakage caused by the transport;
2) wrong or incorrect installation of the product (for instance because of insufficient draught of the
flue or exhausts) in light of the instructions given in the user’s handbook supplied with the
product;
3) inadequate or abnormal electrical, hydraulic and/or gas supplies;
4) carelessness, negligence or incompetence in using the product in light of the instructions given in
the user’s handbook supplied with the product;
5) use of the product for uses different from the one for which it was built or anyway in a manner
not compliant with the instructions given in the user’s handbook supplied with the product;
6) tampering with the product;
7) adjustments and/or maintenance and/or repairs carried out by unauthorised personnel and/or with
non original spare parts;
8) inadequate or careless maintenance of the product in contrast with the user’s handbook supplied
with the product;
9) damages caused by fire, natural disasters and accident as well as by any cause not attributable to
TECNOEKA SRL.
The warranty explicitly excludes
The warranty explicitly excludesThe warranty explicitly excludes
The warranty explicitly excludes: varnished or enamelled parts, knobs, handles, movable or removable
plastic parts, bulbs, glass parts, refractories and any accessories.
TECNOEKA SRL cannot be held responsible for any damages, either direct or indirect, caused by the
product breaking down or following its non-use.
Any repairs carried out during the warranty do not cause said warranty to be extended or renewed.
Nobody is authorised to modify the terms and conditions of the warranty or to issue new verbal or written
warranties.
The warranty is valid only for appliances i
The warranty is valid only for appliances iThe warranty is valid only for appliances i
The warranty is valid only for appliances installed in the European Union.
nstalled in the European Union.nstalled in the European Union.
nstalled in the European Union.
Any dispute shall be settled by the competent Court in Padua.
Warning for the Buyer:
Warning for the Buyer:Warning for the Buyer:
Warning for the Buyer:
1. the cooking appliance is designed only for cooking purposes while the heating appliance is
designed only for heating domestic environments;
2. TECNOEKA S.r.l. does not install the appliances; the seller shall be responsible for any installation
carried out;
3. TECNOEKA S.r.l. cannot be held responsible for any damages, either direct or indirect, to people,
pets or property caused by the appliance breaking down or following its non-use.
The Manufacturer cannot be held responsible for any inaccuracies due to misprints or mistakes in copying
in this handbook. The Manufacturer reserves the right to modify the products as he deems fit, also in the
interest of the user, without affecting the vital characteristics of functionality and safety.