Electrolux Professional E7FTGDCS00 User manual

FRY TOP 700/900 EL/GAS
SERVICE MANUAL
COATED STEEL FRY TOP 700/900 EL/GAS
Document made by Product Care –Technical Training & Service –Vallenoncello PN/Italy
All the images and information of this document are property of ©Electrolux Professional Spa. This document
and all of its contents cannot be copied or used, in part or entirely without the written authorization of Electrolux
Professional Spa.
©Electrolux Professional Spa.
Doc. N. 59785WH00
Edition 1.0 / 10-2019

2
FRY TOP 700/900 EL/GAS
REVISIONS UPDATE:
EDITION
DESCRIPTION
DATE
1.00
First edition of Service Manual
OCT. 2019
Foreword
The service manual (here in after Manual) provides the engineer with information necessary for correct
and safe care of the machine (here in after “machine“, “appliance“ or “unit”).
The following instructions are intended to maintain the machine performance and to preventing injury to per-
sons and animals and damage to property due to improper operating procedures.
All persons involved in machine transport, installation, commissioning and maintenance, repair and disassem-
bly must refer to the content of this manual before carrying out the various operations. This, in order to avoid
wrong and improper actions that could compromise the machine's integrity or endanger people.
If, after reading this manual, there are still doubts regarding machine use, do not hesitate to contact the Man-
ufacturer or the Customer Care to receive prompt and precise assistance for better operation and maximum
efficiency of the machine. During all stages of machine assessment, always respect the current regulations on
safety, work hygiene and environmental protection. It is the user's responsibility to make sure the machine is
started and operated only in optimum conditions of safety for people, animals and property.
IMPORTANT
The manufacturer declines any liability for operations carried out on the appliance without respecting the
instructions given in this manual as well as for operations carried out by the user without respecting the
instructions given in the user manual.
The manufacturer reserves the right to modify the appliances presented in this publication without notice;
manufacturer’s relevant technical bulletins should be used as integration(s)/addendum(s).
No part of this manual may be reproduced without the consent of the manufacturer
This manual is available in digital format by:
contacting the reference customer care;
downloading the latest and up to date manual/technical bulletin(s) on the web site:
“www.electrolux.com/professional“.
The manual must always be part of the documentation available when servicing the machine.

3
FRY TOP 700/900 EL/GAS
PNC’S & MODELS COVERED BY THE SERVICE MANUAL (PAGE 1)
This manual is made for the “coated steel” appliances, it can also be used for the “old”fry top PNC’S (indicated in BLUE filling).
700mm
PNC CODE
MODEL - DESCRIPTION
PNC CODE
MODEL - DESCRIPTION
PNC CODE
MODEL - DESCRIPTION
371037
E7FTGDCS00 - GAS FRY TOP-
SMOOTH CHROME PLATE 400 MM
372037
Z7FTGDCS00 - GAS FRY TOP-
SMOOTH CHROME PLATE 400MM
373037
A7FTGDCS00 - GAS FRY TOP-
SMOOTH CHROME PLATE 400MM
371038
E7FTGHCS00 - GAS FRY TOP-
SMOOTH CHROME PLATE 800MM
372038
Z7FTGHCS00 - GAS FRY TOP-
SMOOTH CHROME PLATE 800MM
373038
A7FTGHCS00 - GAS FRY TOP-
SMOOTH CHROME PLATE 800MM
371041
E7FTGHCP00 - GAS FRYTOP-
SMOOTH+RIBB.CHR.PLATE 800MM
372039
Z7FTGDCSO0 - GAS FRY TOP-
SMOOTH CHR.PLATE+BASE 400MM
373041
A7FTGHCP00 - GAS FRYTOP-
SMOOTH+RIBB.CHR.PLATE 800MM
371193
E7FTEDCSI0 - EL. FRY TOP-SMOOTH
CHROME PLATE 400MM
372040
Z7FTGHCSO0 - GAS FRY TOP-
SMOOTH CHR.PLATE+BASE 800MM
373193
A7FTEDCSI0 - EL. FRY TOP-SMOOTH
CHROME PLATE 400MM
371194
E7FTEHCSI0 - EL. FRY TOP-SMOOTH
CHROME PLATE 800MM
372041
Z7FTGHCP00 - GAS FRYTOP-
SMOOTH+RIBB.CHR.PLATE 800MM
373194
A7FTEHCSI0 - EL. FRY TOP-SMOOTH
CHROME PLATE 800MM
371197
E7FTEHCPI0 - EL. FRY TOP-
SMOOTH+RIBB.CHR.PLATE 800MM
372193
Z7FTEDCSI0 - EL. FRY TOP-SMOOTH
CHROME PLATE 400MM
373197
A7FTEHCPI0 - EL. FRY TOP-
SMOOTH+RIBB.CHR.PLATE 800MM
371201
E7FTEHCPIN -EL.FRY TOP-
SMOOTH+RIBB.CHR.PL.800MM-
230V
372194
Z7FTEHCSI0 - EL. FRY TOP-SMOOTH
CHROME PLATE 800MM
373201
A7FTEHCPIN - EL.FRY TOP-
SMOOTH+RIBB.CHR.PL.800MM-
230V
371320
E7IIKAAOMCA - GAS FRY TOP-
SMOOTH 400 MM-COATED STEEL
372195
Z7FTEDCSQ0 - EL. FRY TOP-SMOOTH
CHR.PLATE+BASE 400MM
373320
N7IIKAAOMCA - GAS FRY TOP-
SMOOTH 400 MM- COATED STEEL
371321
E7IIKIAOMCA - EL. FRY TOP-
SMOOTH 400 MM-230V- COATED
STEEL
372196
Z7FTEHCSQ0 - EL. FRY TOP-SMOOTH
CHR.PLATE+BASE 800MM
373321
N7IIKIAOMCA - EL. FRY TOP-
SMOOTH 400 MM-230V- COATED
STEEL
371322
E7IIKIAOMEA - EL. FRY TOP-
SMOOTH 800 MM-230V- COATED
STEEL
372197
Z7FTEHCPI0 - EL. FRY TOP-
SMOOTH+RIBB.CHR.PLATE 800MM
373322
N7IIKIAOMEA - EL. FRY TOP-
SMOOTH 800 MM-230V- COATED
STEEL
371323
E7IILAAOMCA - GAS FRY TOP-
RIBBED 400 MM- COATED STEEL
372201
Z7FTEHCPIN - EL.FRY TOP-
SMOOTH+RIBB.CHR.PL.800MM-
230V
373323
N7IILAAOMCA - GAS FRY TOP-
RIBBED 400 MM- COATED STEEL
371325
E7IIKDAOMCA - EL. FRY TOP-
SMOOTH 400 MM- COATED STEEL
372320
Z7IIKAAOMCA - GAS FRY TOP-
SMOOTH 400 MM- COATED STEEL
373325
N7IIKDAOMCA - EL. FRY TOP-
SMOOTH 400 MM- COATED STEEL
371328
E7IINDAOMCA - EL. FRY TOP
SMOOTH HORIZ. 400MM- COATED
STEEL
372321
Z7IIKIAOMCA - EL. FRY TOP-
SMOOTH 400 MM-230V- COATED
STEEL
373328
N7IINDAOMCA - EL. FRY TOP
SMOOTH HORIZ. 400MM- COATED
STEEL
371329
E7IIMIAOMEA - EL. FRY TOP-
SM+RIBB.800 MM-230V- COATED
STEEL
372322
Z7IIKIAOMEA - EL. FRY TOP-
SMOOTH 800 MM-230V- COATED
STEEL
373329
N7IIMIAOMEA - EL. FRY TOP-
SM+RIBB.800 MM-230V- COATED
STEEL
371330
E7IIKAAOMEA - GAS FRY TOP-
SMOOTH 800 MM- COATED STEEL
372323
Z7IILAAOMCA - GAS FRY TOP-
RIBBED 400 MM- COATED STEEL
373330
N7IIKAAOMEA - GAS FRY TOP-
SMOOTH 800 MM- COATED STEEL
371332
E7IILDAOMCA - EL. FRY TOP-RIBBED
400 MM- COATED STEEL
372324
Z7IIKABLMEA - GAS FRY TOP-
SMOOTH+BASE 800MM- COATED
STEEL
373332
N7IILDAOMCA - EL. FRY TOP-
RIBBED 400 MM- COATED STEEL
371335
E7IIMAAOMEA - GAS FRY TOP-
SMOOTH+RIBB.800 MM- COATED
STEEL
372325
Z7IIKDAOMCA - EL. FRY TOP-
SMOOTH 400 MM- COATED STEEL
373335
N7IIMAAOMEA - GAS FRY TOP-
SMOOTH+RIBB.800 MM- COATED
STEEL
371340
E7IIKDAOMEA - EL. FRY TOP-
SMOOTH 800 MM- COATED STEEL
372328
Z7IINDAOMCA - EL. FRY TOP
SMOOTH HORIZ. 400MM- COATED
STEEL
373340
N7IIKDAOMEA - EL. FRY TOP-
SMOOTH 800 MM- COATED STEEL
371344
E7IILDAOMEA - ELEC.FRY TOP-
RIBBED 800MM- COATED STEEL
372329
Z7IIMIAOMEA - EL. FRY TOP-
SM+RIBB.800 MM-230V- COATED
STEEL
373344
N7IILDAOMEA - ELEC.FRY TOP-
RIBBED 800MM- COATED STEEL
371347
E7IIMDAOMEA - EL. FRY TOP-
SMOOTH+RIBB.800 MM- COATED
STEEL
372330
Z7IIKAAOMEA - GAS FRY TOP-
SMOOTH 800 MM- COATED STEEL
373347
Z7IIMDAOMEA - EL. FRY TOP-
SMOOTH+RIBB.800 MM- COATED
STEEL
372331
Z7IIMDBLMEA - EL. FRY TOP-
SM+RIBB.+BASE800MM- COATED
STEEL
372332
Z7IILDAOMCA - EL. FRY TOP-RIBBED
400 MM- COATED STEEL

4
FRY TOP 700/900 EL/GAS
PNC’S & MODELS COVERED BY THE SERVICE MANUAL (PAGE 2)
This manual is made for the “coated steel” appliances, it can also be used for the “old”fry top PNC’S (indicated in BLUE filling).
900mm
PNC CODE
MODEL - DESCRIPTION
PNC CODE
MODEL - DESCRIPTION
PNC CODE
MODEL - DESCRIPTION
391053
ETGDCS00 -GAS FRYTOP
CHR.SMOOTH SLOPED PLATE
400MM
392053
ZTGDCS00 - GAS FRYTOP
CHR.SMOOTH SLOPED PL 400MM
393053
ATGDCS00 -GAS FRYTOP
CHR.SMOOTH SLOPED PLATE 400
MM
391054
ETGHCS00 - GAS FRYTOP
CHR.SMOOTH SLOPED PLATE
800MM
392054
ZTGHCS00 - GAS FRYTOP
CHR.SMOOTH SLOPED PL800MM
393054
ATGHCS00 -GAS FRYTOP
CHR.SMOOTH SLOPED PLATE 800
MM
391055
ETGHCS00 -GAS FRYTOP
CHR.SMOOTH SLOPED PLATE
800MM
392055
ZTGHCP00 -GAS FRYTOP
CHR.SMOOTH RIBB.SLOPED 800MM
393055
ATGHCP00 - GAS FRYTOP
CHR.SMOOTH+RIBB.SLOPED 800
MM
391072
ETEDCS00 - EL.FRYTOP
CHR.SMOOTH SLOPED PLATE 400
MM
392072
ZTEDCS00 EL.FRYTOP CHR.SMOOTH
SLOPED PALTE 400MM
393072
ATEDCS00 - EL.FRYTOP
CHR.SMOOTH SLOPED PLATE 400
MM
391073
ETEHCS00 - EL.FRYTOP
CHR.SMOOTH SLOPED PLATE 800
MM
392073
ZTEHCS00 EL.FRYTOP CHR.SMOOTH
SLOPED PLATE 800MM
393073
ATEHCS00 - EL.FRYTOP
CHR.SMOOTH SLOPED PLATE 800
MM
391074
ETEHCP00 - EL.FRYTOP
CHR.SMOOTH+RIBBED SLOPED
800MM
392074
ZTEHCP00 EL.FRYTOP
CHR.SMOOTH+RIBBED SLOPED
800M
393074
ATEHCP00 - EL.FRYTOP
CHR.SMOOTH+RIBBED SLOPED 800
MM
391175
ETEDCS0NEL.FRYTOP CHR.SMOOTH
SLOPED 400 MM-230V
392175
ZTEDCS0N EL.FRYTOP CHR.SMOOTH
SLOPED 400MM 230V
393175
ATEDCS0N - EL.FRYTOP
CHR.SMOOTH SLOPED 400MM-230V
391176
ETEHCS0N EL.FRYTOP CHR.SMOOTH
SLOPED 800 MM-230V
392176
ZTEHCS0N EL.FRYTOP CHR SMOOTH
SLOPED 800MM 230V
393176
ATEHCS0N - EL.FRYTOP
CHR.SMOOTH SLOPED 800 MM-
230V
391177
ETEHCP0NEL.FRYTOP
CHR.SMOOTH+RIB.SLOP.800MM-
230V
392177
ZTEHCP0N EL.FRYTOP
CHR.SMOOTH+RIB.SLOP800MM
230V
393177
ATEHCP0N - EL.FRYTOP
CHR.SMOOTH+RIB.SLOP.800MM-
230V
391354
E9IILAAOMCA - GAS FRYTOP RIBB
SLOPED 400 MM- COATED STEEL
392354
Z9IILAAOMCA - GAS FRYTOP RIBB
SLOPED 400 MM- COATED STEEL
393354
N9IILAAOMCA - GAS FRYTOP RIBB
SLOPED 400 MM- COATED STEEL
391356
E9IILDAOMCA - EL.FRYTOP
RIBB.SLOPED 400 MM- COATED
STEEL
392356
Z9IILDAOMCA - EL.FRYTOP
RIBB.SLOPED 400 MM- COATED
STEEL
393356
N9IILDAOMCA - EL.FRYTOP
RIBB.SLOPED 400 MM- COATED
STEEL
391357
E9IINDAOMCA - EL.FRYTOP
SMOOTH HORIZ. 400 MM- COATED
STEEL
392357
Z9IINDAOMCA - EL.FRYTOP
SMOOTH HORIZ. 400 MM- COATED
STEEL
393357
N9IINDAOMCA - EL.FRYTOP
SMOOTH HORIZ. 400 MM- COATED
STEEL
391358
E9IIMDAOMEA - EL.FRYTOP
SMOOTH+RIB. SL.800MM- COATED
STEEL
392358
Z9IIMDAOMEA - EL.FRYTOP
SMOOTH+RIBBED SL.800MM-
COATED STEEL
393358
N9IIMDAOMEA - EL.FRYTOP
SMOOTH+RIB. SL.800MM- COATED
STEEL
391359
E9IIMIAOMEA -EL.FRYTOP
SM+RIBB.SL.800MM-230V- COATED
STEEL
392359
Z9IIMIAOMEA -EL.FRYTOP
SM+RIBB.SL.800MM-230V- COATED
STEEL
393359
N9IIMIAOMEA -EL.FRYTOP
SM+RIBB.SL.800MM-230V- COATED
STEEL
391395
E9IILIAOMCA - EL.FRYTOP
RIBB.SLOPED 400MM-230V-
COATED STEEL
392395
Z9IILIAOMCA - EL.FRYTOP
RIBB.SLOPED 400MM-230V-
COATED STEEL
393395
N9IILIAOMCA - EL.FRYTOP
RIBB.SLOPED 400MM-230V-
COATED STEEL
391398
E9IINIAOMCA-EL.FRYTOP SMOOTH
HORIZ.400MM-230V- COATED
STEEL
392398
Z9IINIAOMCA-EL.FRYTOP SMOOTH
HORIZ.400MM-230V- COATED
STEEL
393398
N9IINIAOMCA-EL.FRYTOP SMOOTH
HORIZ.400MM-230V- COATED
STEEL
391399
E9IINIAOMEA - EL.FRYTOP SM
HORIZ. 800MM-230V- COATED
STEEL
392399
Z9IINIAOMEA - EL.FRYTOP
SM.HORIZ. 800MM-230V- COATED
STEEL
393399
N9IINIAOMEA - EL.FRYTOP
SM.HORIZ. 800MM-230V- COATED
STEEL
391400
E9IINDAOMEA - EL.FRYTOP
SMOOTH HORIZ. 800 MM- COATED
STEEL
392400
Z9IINDAOMEA - EL.FRYTOP
SMOOTH HORIZ. 800 MM- COATED
STEEL
393400
N9IINDAOMEA - EL.FRYTOP
SMOOTH HORIZ. 800 MM- COATED
STEEL
391401
E9IINAAOMEA - GAS FRYTOP
SMOOTH HORIZ.800MM- COATED
STEEL
392401
Z9IINAAOMEA - GAS FRYTOP
SMOOTH HORIZ. 800MM- COATED
STEEL
393401
N9IINAAOMEA - GAS FRYTOP
SMOOTH HORIZ. 800MM- COATED
STEEL
391402
E9IINAAOMCA - GAS FRYTOP
SMOOTH HORIZ. 400MM- COATED
STEEL
392402
Z9IINAAOMCA - GAS FRYTOP
SMOOTH HORIZ. 400MM- COATED
STEEL
393402
N9IINAAOMCA - GAS FRYTOP
SMOOTH HORIZ. 400MM- COATED
STEEL
391403
E9IIMAAOMEA - GAS FRYTOP
SMOOTH+RIBB.SL. 800MM COATED
STEEL
392403
Z9IIMAAOMEA - GAS FRYTOP
SMOOTH+RIBB.SL. 800MM COATED
STEEL
393403
N9IIMAAOMEA - GAS FRYTOP
SMOOTH+RIBB.SL. 800MM COATED
STEEL
391408
E9IILDAOMEA - ELECTRIC FRYTOP
FULL RIBB.SL.800 M- COATED STEEL
392408
Z9IILDAOMEA - ELECTRIC FRYTOP
FULL RIBB.SL.800 M- COATED STEEL
393408
N9IILDAOMEA - ELECTRIC FRYTOP
FULL RIBB.SL.800 M- COATED STEEL

5
FRY TOP 700/900 EL/GAS
INDEX
1GENERAL INFORMATION.......................................................................................................................... 8
1.1 GENERAL INFORMATION ................................................................................................................. 8
1.2 SAFETY INFORMATION/PRECAUTIONS........................................................................................... 9
PERSONAL PROTECTION EQUIPMENT ................................................................................. 10
GENERAL INFORMATION......................................................................................................... 10
RESIDUAL RISKS ...................................................................................................................... 11
1.3 DATA PLATE (IDENTIFICATION STICKER)..................................................................................... 13
1.4 TECHNICAL DATA............................................................................................................................. 14
1.5 OVERALL DRAWINGS WITH MEASUREMENTS............................................................................. 15
2INSTALLATION AND COMMISSIONING ................................................................................................. 17
2.1 INSTALLATION .................................................................................................................................. 17
UNPACKING AND POSITIONING THE EQUIPMENT............................................................... 17
2.1.1.1 ROOM REQUIREMENTS................................................................................................... 17
LIMITATIONS.............................................................................................................................. 17
LIST OF POSSIBLE INSTALLATION SOLUTIONS ................................................................... 17
2.1.3.1 ON BASE............................................................................................................................ 17
2.1.3.2 ON REFRIGERATED COUNTER ...................................................................................... 18
2.1.3.3 SIDE BY SIDE.................................................................................................................... 19
APPLIANCE REQUIREMENTS.................................................................................................. 20
2.1.4.1 POWER (VOLTS)............................................................................................................... 20
2.1.4.2 GAS .................................................................................................................................... 20
2.2 ELECTRIC CONNECTION................................................................................................................. 21
HOW TO RECOGNIZE PHASE AND NEUTRAL ....................................................................... 23
2.3 GAS CONNECTION........................................................................................................................... 24
NOMINAL GAS PRESSURE CHECK......................................................................................... 25
2.3.1.1 700 GAS APPLIANCES...................................................................................................... 26
2.3.1.2 900 GAS APPLIANCES...................................................................................................... 27
GAS CONVERSION ................................................................................................................... 28
2.3.2.1 NOZZELS ........................................................................................................................... 29
2.3.2.2 BURNER............................................................................................................................. 30
2.3.2.3 PILOT.................................................................................................................................. 30
2.3.2.4 GAS PRESSURE REGULATOR....................................................................................... 31
2.4 INSTALLATION ACCESSORIES ....................................................................................................... 32
2.5 FIRST START UP............................................................................................................................... 32
DAILY STARTUP OF GAS APPLIANCE.................................................................................... 32
2.5.1.1 700 GAS SUPPLIED APPLIANCES................................................................................... 32
2.5.1.2 900 GAS SUPPLIED .......................................................................................................... 33
DAILY STARTUP OF ELECTRIC APPLIANCE.......................................................................... 34
PRECAUTIONS WHEN TURNING OFF THE APPLIANCE....................................................... 34

6
FRY TOP 700/900 EL/GAS
2.6 COMMISSIONING.............................................................................................................................. 35
3USE OF APPLIANCE ................................................................................................................................ 35
3.1 OPERATING INSTRUCTIONS........................................................................................................... 35
3.2 PREVENTIVE ROUTINES/MAINTENANCE FOR THE OPERATOR................................................ 35
CLEANING.................................................................................................................................. 36
4DETAILED APPLIANCE AND COMPONENTS DESCRIPTION/FUNCTIONING.................................... 38
4.1 EQUIPMENT FUNCTIONING ............................................................................................................ 38
GAS SYSTEM............................................................................................................................. 38
ELECTRIC SYSTEM................................................................................................................... 39
4.2 COMPONENTS TECHNICAL DESCRIPTION/FUNCTIONING......................................................... 40
GAS SUPPLIED APPLIANCES.................................................................................................. 40
4.2.1.1 GAS VALVE 700................................................................................................................. 41
4.2.1.2 GAS VALVE 900................................................................................................................. 44
4.2.1.2.1 MODULATING & ON/OFF .............................................................................................. 45
4.2.1.3 PILOT & THERMOCOUPLE INTERRUPTED 700 & 900 .................................................. 46
4.2.1.4 IGNITER 700 & 900............................................................................................................ 49
4.2.1.5 BURNER & AERATOR 700 & 900..................................................................................... 49
4.2.1.6 SAFETY THERMOSTAT 700 & 900 .................................................................................. 50
ELECTRIC SUPPLIED APPLIANCES........................................................................................ 51
4.2.2.1 SELECTOR 700 & 900....................................................................................................... 52
4.2.2.2 WORK THERMOSTAT 700 & 900 ..................................................................................... 53
4.2.2.3 SAFETY THERMOSTAT 700 & 900 .................................................................................. 53
4.2.2.4 LEDS 700 & 900................................................................................................................. 53
4.2.2.5 HEATING ELEMENT 700 & 900 ........................................................................................ 54
4.2.2.6 TERMINAL BOARD 700 & 900 .......................................................................................... 54
5TROUBLESHOOTING............................................................................................................................... 55
5.1 INTRODUCTION ................................................................................................................................ 55
5.2 THERMOCOUPLES FLAME POSITION............................................................................................ 57
5.3 AGING OF THERMOCOUPLES ........................................................................................................ 57
6SERVICING THE APPLIANCE.................................................................................................................. 59
6.1 LIST OF NEEDED TOOLS................................................................................................................. 59
6.2 REPLACING EQUIPMENT COMPONENTS...................................................................................... 60
6.3 DISASSEMBLY/REASSEMBLE OF COMPONENTS........................................................................ 60
CONTROL PANEL...................................................................................................................... 60
GAS COMPONENTS .................................................................................................................... 61
6.3.2.1 GAS VALVE........................................................................................................................ 62
6.3.2.1.1 700 .................................................................................................................................. 62
6.3.2.1.2 900 .................................................................................................................................. 63
6.3.2.2 THERMOSTAT & SAFETY THERMOSTAT BULB - 700 & 900 ........................................ 64
6.3.2.3 PILOT ASSEMBLY 700 & 900 ........................................................................................... 65
6.3.2.4 IGNITER 700 ...................................................................................................................... 65

7
FRY TOP 700/900 EL/GAS
6.3.2.5 BURNER 700 & 900........................................................................................................... 66
6.3.2.6 SAFETY THERMOSTAT 700 & 900 .................................................................................. 66
ELECTRIC COMPONENTS........................................................................................................ 67
6.3.3.1 SELECTOR AND TERMOSTAT 700 & 900....................................................................... 68
6.3.3.2 THERMOSTAT & SAFETY THERMOSTAT BULB - 700 & 900 ........................................ 69
6.3.3.3 HEATING ELEMENT 700 & 900 ........................................................................................ 70
6.3.3.4 SAFETY THERMOSTAT 700 & 900 .................................................................................. 71
6.4 PREVENTIVE MAINTENANCE.......................................................................................................... 72
7RELATED DOCUMENTS .......................................................................................................................... 72
7.1 EXPLODED VIEW .............................................................................................................................. 72
LIST OF THE VITAL PARTS / CONSUMABLES / WEAR AND TEAR ...................................... 72
7.2 ELECTRICAL WIRING DIAGRAM ..................................................................................................... 73
7.3 GAS TABLES...................................................................................................................................... 74
7.4 CERTIFICATES OF CONFORMITY................................................................................................... 74
7.5 LIST OF AVAILABLE ACCESSORIES............................................................................................... 74

8
FRY TOP 700/900 EL/GAS
1 GENERAL INFORMATION
1.1 GENERAL INFORMATION
To ensure safe use of the machine and a proper understanding of the manual it is necessary to be familiar
with the terms and typographical conventions used in the documentation. The following symbols are used in
the manualto indicateand identifythe various typesof hazards:
WARNING
Danger for the health and safety of operators.
WARNING
Danger of electrocution - dangerousvoltage.
CAUTION
Risk of damageto the machine or the product.
WARNING
Danger of magnetic fields.
IMPORTANT
Importantinstructionsor informationon the product
Read the instructionsbefore using the appliance
Clarificationsand explanations
• Onlyspecialisedpersonnelare authorisedto operateon the machine.
•This appliance must not be used by minors and adults with limited physical, sensory or mental
abilities or without adequate experience and knowledgeregardingits use.
–Do not let children play with the appliance.
–Keep all packagingand detergentsaway from children.
–Cleaning and user maintenance shall not be made by children withoutsupervision.
•Do not store explosive substances, such as pressurized containers with flammablepropellant,in
this applianceor closeto the appliance
•Do not remove, tamper with or make the machine “CE“ marking illegible.
•Refer to the data given on the machine’s data plate “CE“ marking for relationswith the Manufacturer
(e.g. whenorderingspare parts,etc.).
• Whenscrappingthe machine,the “CE“ markingmustbe destroyed.

9
FRY TOP 700/900 EL/GAS
1.2 SAFETY INFORMATION/PRECAUTIONS
•Risksmainlyofamechanical,thermalandelectricalnatureexistinthe machine.Wherepossibletherisks
havebeen neutralised:
–directly,bymeansof adequatedesignsolutions.
–indirectlybyusingguards,protectionand safetydevices.
•During maintenance several risks remain, as these could not be eliminated, and must be
neutralised by adopting specific measures and precautions.
•Do not carry out any checking, cleaning, repair or maintenance operations on moving
parts. Workers must be informed of this prohibitionbymeansof clearlyvisiblesigns.
•To guarantee machine efficiency and correct operation, periodical maintenancemust be carried
out accordingto the instructionsgiven in this manual.
•Make sure to periodically check correct operation of all the safety devicesand the insulationof
electricalcables,whichmustbereplaced if damaged.
•Extraordinary machine maintenance operations must only be carried out by specialized Technicians
provided with all the appropriate personal protection equipment (safety shoes, gloves, glasses,
overalls,etc.),tools,utensilsandancillarymeans.
•Never operate the machine,removing,modifyingor tampering with the guards, protection or safety de-
vices.
•Before carryingout any operation on the machine,alwaysconsult the manual which gives the correct
procedures and contains important informationon safety.

10
FRY TOP 700/900 EL/GAS
PERSONAL PROTECTION EQUIPMENT
Summarytable of the Personal Protection Equipment (PPE) to be used during the various stages of the ma-
chine's service life.
Stage
Protective
garments
Safety
footwear
Gloves
Glasses
Safety
helmet
Transport
—
●
○
—
○
Handling
—
●
○
—
—
Unpacking
—
●
●
—
—
Installation
—
●
●
2
●
—
Normaluse
●
●
●
1
○
—
Adjustments
○
●
○
○
—
Routinecleaning
○
●
●
1 or 2
○
—
Extraordinary
cleaning
○
●
●
1 or 2
○
—
Maintenance
○
●
○
○
—
Dismantling
○
●
○
○
—
Scrapping
●
●
●
●
—
Key:
●
PPE REQUIRED
○
PPE AVAILABLEOR TO BE USED IF NECESSARY
—
PPE NOT REQUIRED
1. During these operations, the worn gloves must be heatproof to protect hands from contact with
hot food or hot parts of the appliance and/or when removing hot items from it.
Failure to use the
personal protection equipment by operators, specialized personnel or users can involve exposure
to chemical risk and possible damage to health (depending on the model).
2. During these operations, the worn gloves must be cut-resistant. Failure to use the personal pro-
tection equipment by operators, specialized personnel or users can involve exposure to damage
to health (depending on the model).
GENERAL INFORMATION
•The machines are provided with electric and/or mechanical safety devices for protecting workers
and the machine itself. Therefore the user must not remove or tamper with such devices. The Manufacturer
declinesanyliabilityfordamagedueto tamperingor their non-use.
•Never operate the machine,removing,modifyingor tampering with the guards, protection or safety de-
vices.
•Donotmakeanymodificationstothepartssuppliedwiththeappliance.
•Several illustrations in the manual show the machine, or parts of it, without guards or with guards
removed. This is purely for explanatory purposes. Do not use the machine without the guards or with the
protectiondevicesdeactivated.

11
FRY TOP 700/900 EL/GAS
•Do not remove, tamper with or make illegible the safety, danger and instructionsigns and labels on
the machine.
•Air recirculation must take into account the air necessary for combustion, 2 m³/h/kW of
gas power, and also the "well-being" of personsworkingin the kitchen.
•Inadequateventilationcausesasphyxia.Do notobstructtheventilation system in the place where this
appliance is installed. Do not obstruct the vents or ductsof thisor other appliances.
•Placeemergencytelephonenumbersin a visibleposition.
•Themeasuredsoundlevelemitted“A“ doesnot exceed 70 dB (“A“).
•Turnthe applianceoff in case of faultor poor operation.
•Do not use products (even if diluted) containing chlorine (sodium hypochlorite,hydrochloricor
muriatic acid, etc.) to clean the appliance or the floor under it.
•Donotusemetaltoolstocleansteelparts(wirebrushesorScotchBrite type scouringpads).
•Donotallowoilorgreasetocomeintocontactwithplasticparts.Donot allowdirt,fat,foodorother residu-
alsto form depositsonthe appliance.
•Do not spraywateror usesteamto clean the equipment.
•Do not store or use gasoline or other flammable vapours, liquids or itemsinthevicinityof thisor any
other appliance.
•Do not spray aerosols in the vicinity of this appliance while it is in operation.
•Nevercheck for leakswithan openflame.
RESIDUAL RISKS
•The machine has several risks that were not completely eliminated fromadesignstandpointor with
theinstallationof adequateprotection devices. Nevertheless, through this manual the Manufacturer has taken
steps to inform operators of such risks, carefully indicating the
personal protection equipment to be used by them. Sufficient spaces are provided for during the machine
installationstages in order to limit these risks.
To preserve these conditions, the areas around the machine must alwaysbe:
–kept freeof obstacles(e.g.ladders,tools, containers,boxes,etc.);
–clean and dry;
–well lit.
For the Customer's complete information, the residual risks remaining on the machine are indicated below:
such actions are deemed improperand thereforestrictlyforbidden.
Residual risk
Description of hazardous situation
Slippingor falling
The operatorcan slip due to wateror dirt on the floor
Burns/abrasions(e.g. heatingelements)
Theoperatordeliberatelyor unintentionallytouchessome compo-
nentsinside the machine without using protectivegloves
Electrocution
Contact with live parts during maintenance operations carried out
with the electricalpanel powered
Sudden closing of the lid/ door/oven door (if pre-
sent, dependingon the appliancetype)
The operator for normal machine use could suddenlyanddeliber-
atelyclosethe lid/door/ovendoor(ifpresent,depending ontheap-
pliancetype)
Tippingof loads
Whenhandlingthe machineorthe packingcontainingit, using un-
suitable liftingsystemsor accessoriesor withthe loadunbalanced
Mechanicalsafety characteristics,hazards
•The appliance does not have sharp edges or protruding parts. The guardsforthemovingandlive
partsarefixedtothecabinetwithscrews, to preventaccidentalaccess.
Protectiondevicesinstalledon the machine
•The guardson the machineare:
–fixed guards (e. g. casings, covers, side panels, etc.), fixed to the machineand/orframewith
screwsor quick-releaseconnectorsthat can only beremovedor openedwith tools

12
FRY TOP 700/900 EL/GAS
Safety signs to be placed near the machine area
Prohibition
Meaning
do not remove the safety devices
do not use water to extinguish fires (placed on electri-
calparts)
Keep the area around the appliance clear and free
from combustible materials. Do not keep flammable
materialsin the vicinity of the appliance
Installthe appliancein a well-ventilatedplaceto avoid
the creation of dangerous mixtures of unburnt gases
in the same room
Danger
Meaning
danger of burns
dangerofelectrocution(shownon electrical partswith
indicationof voltage)
risk of electromagneticfields
Access forbidden to wearers of electrical stimulator
(pacemakers)
End of use
When the appliance is no longer to be used, make it unusable by removing the mains power supply
wiring.

13
FRY TOP 700/900 EL/GAS
1.3 DATA PLATE (IDENTIFICATION STICKER)
The identification sticker is located on the side panel. The meaning of the various information is listed below:
SERIAL NUMBER (PRODUCTION DATE) is necessary to find the correct spare part or to ask tech. support.
EXAMPLE: Serial Number 9 03 1 0001
19YEAR
03 WEEK
0001 APPLIANCE
MANUFACTURED

14
FRY TOP 700/900 EL/GAS
1.4 TECHNICAL DATA
ELECTRIC 700 MODELS
ELECTRIC 900 MODELS
GAS 700 MODELS
GAS 900 MODELS

15
FRY TOP 700/900 EL/GAS
1.5 OVERALL DRAWINGS WITH MEASUREMENTS
ELECTRIC APPLIANCE:
700 x 400mm 700 x 800mm
900 x 400mm 900 x 800mm

16
FRY TOP 700/900 EL/GAS
GAS APPLIANCES
700 x 400mm 700 x 800mm
900 x 400mm 900 x 800mm

17
FRY TOP 700/900 EL/GAS
2 INSTALLATION AND COMMISSIONING
2.1 INSTALLATION
The following chapters are intended only for authorized technicians / engineers
UNPACKING AND POSITIONING THE EQUIPMENT
2.1.1.1 ROOM REQUIREMENTS
To guarantee continuous operation,the room temperature range must be between 5°C and 40°C.
Outdoor functioning is strictly allowed only if the machine can be protected against any conditions being out of
the above temperature range and against any atmospheric agents.
On a hot cupboard base take precaution to install a baffle for preventing hot air to reach the oven fresh air
intake; this could create malfunctioning.
High room humidity may cause water to condensate on electric components hence causing short circuit.
LIMITATIONS
LIST OF POSSIBLE INSTALLATION SOLUTIONS
Hereinafter, the instructions for the main installation possibilities. The different accessories have a dedicated
I.M; please refer also to these documents provided with the accessories or available on PRIDE.
2.1.3.1 ON BASE
All top appliances can be fixed onto neutral bases.
WARNING / CAUTION !
Before any operation on the machine read Chapter SAFETY INFOR-
MATION/PRECAUTIONS. We recomand for any phase involving the re-
moval of the packaging to use cut-resistant gloves
OUT, foot
IN, M6
bolt to fix
top
IMPORTANT: We suggest to use a M6
25mm bolt to fix the top to the base unit, it
makes the job much easier than using the
foot (inside the base there are some inter-
ference, job can be done bit an M6 bolt is
much faster with a spanner than with foot.
Top
Neutral
Base

18
FRY TOP 700/900 EL/GAS
2.1.3.2 ON REFRIGERATED COUNTER
The top appliances can be installed on the predisposed refrigerated base counters.
With the counter are supplied the indicated fixing pins and spring catches (to be fixated on counter)
The pins replace the original feet of the top then the top can be positioned on the counter.
IMPORTANT= the illustration represents a 1200mm refrigerated counter. For appliances with this dimension
are predisposed 12 pins and catches, this because it could be possible to fit on top of the counter different size
appliances that would have their feet meet different positions on top of the counter. The 800mm Fry top would
be able to fit on top of the refrigerated counter and to its side would be possible to install a 400mm element.

19
FRY TOP 700/900 EL/GAS
2.1.3.3 SIDE BY SIDE
If desired, once that the top appliance has been fixed to a base unit it can be fixed to similar dimension appli-
ances.

20
FRY TOP 700/900 EL/GAS
APPLIANCE REQUIREMENTS
2.1.4.1 POWER (VOLTS)
Refer to the volts range data indicated in the tech specs table § TECHNICAL DATA
2.1.4.2 GAS
Appliance cate-
gory
Gas type
(mbar) NOMINAL
(mbar) MIN
(mbar) MAX
2nd family 2H
G20
20
17
25
2nd family 2L
G25
25
20
30
2nd family 2E
G20
20
17
25
2nd family 2N
G20/G25
20
17
30
G25
25
20
30
3rd family 3B/P
G30/G31
29
25
35
G30/G31
50
42,5
57,5
3rd family 3P
G31
37
25
45
G31
50
42,5
57,5
3rd family 3Bc
G30/G31
29
20
35
CAUTION !
The gas pressure must have a costant value, fluctuating pressure may cause malfunctions or
incorrect functioning of the ignition / performance.