Elektral TRU-VEND Maxi-Buffet Specification sheet

Maxi-Buffet®
I
NSTRUCTIONS FOR USE &
M
MAINTENANCE MANUAL
Version: 15.12
“She sells, You earn!..®”
www.elektral.com.tr
Headquarters & FACTORIES:
Elektral
®
Elektromekanik San. ve Tic. A.S.
Izmir Ataturk Industrial Zone
M.K. Ataturk Blv.23 Cigli
35620 İzmir-TR
Phone : [phone]
Fax : [phone]
E-mail : [email protected]

2
CONTENTS PAGE
INTRODUCTION
OPERATION and SAFETY WARNINGS
1. GENERAL DESCRIPTION
2. MAIN UNITS
2.1 Product Trays
2.2 Control Panel
2.2.1 Capacitive Touch Keypad
2.2.2 Graphical LCD Screen
2.2.3 Payment System (Optional)
2.2.3.1 Coin Selector
2.2.3.2 Change Giver
2.2.3.3 Bill Validator
2.2.3.4 Prepaid Card System (Cashless Payment Device)
2.3 Coin Return Push Button
2.4. Coin Entry Slot
2.5 Coin Return Chute
2.6. Cash Box
2.7 Electronic Modules
3. VENDING MACHINE SAFETY
4. PROGRAMMING
4.1 Main Menus
4.2 Menus
4.2.1 Settings Main Menu
4.2.1.1. Payment System
4.2.1.1.1 Serial Protocol
4.2.1.1.2 MDB Settings
4.2.1.1.3 EXECUTIVE Settings
4.2.1.1.4 CCTALK Settings (Optional)
4.2.1.1.5 MDB Settings (Optional)
4.2.1.1.6 PARALLEL Settings (Optional)
4.2.1.2 IR Product Sensor
4.2.1.3 Cooling Unit (Optional)
5
6
8
9
10
11
11
11
11
11
11
12
12
12
12
12
12
12
13
14
14
15
15
15
16
16
16
17
17
17
17
17

3
4.2.1.4 Date-Time Settings
4.2.1.5 Language Setting
4.2.1.6 Change Password
4.2.1.7 Illumination Settings
4.2.1.7.1 Illumınation Power
4.2.1.7.2 LED Settings
4.2.1.8. Authorization
4.2.2 Statistics Main Menu
4.2.2.1 Sale Counter
4.2.2.2 Cash Counter
4.2.2.3 Errors
4.2.2.4 Reset
4.2.2.5 Get Report (Optional
4.2.3 Prices Main Menu
4.2.3.1 Price Settings
4.2.3.2 Discount (Optional)
4.2.4 Machine Test Main Menu
4.2.4.1 Motor Control
4.2.4.2 IR Control
4.2.4.3 Motor Status
4.2.4.4 Payment System
4.2.4.5 Touch board
4.2.4.6. Relay Control
4.2.5 Accessories Main Menu
4.2.5.1. Alarm
4.2.5.2 GSM/GPRS (Optional
4.2.5.3 Impact Sensor
5. TECHNICAL SPECIFICATIONS and ENERGY EFFICIENCY
6. TRANSPORTATION and INSTALLATION
7. OPERATION OF MAXI BUFFET
8. INSTALLATION and CLEANING
9. OPTIONAL UNITS
9.1 Cooling Unit
9.2 Additional Tray / Canned Drink Dispenser
9.3 GSM/GPRS Remote Access
17
18
18
18
18
18
18
19
19
19
19
20
20
21
21
21
21
21
21
21
21
21
21
21
21
22
22
22
22
23
24
24
24
25
25

4
9.6 Optional Heating /Conditioning
10. TROUBLESHOOTING
10.1 Warnings
10. 2 Frequently Asked Questions
10. 2.1 General Questions
10.2.2 Operational Questions
11. MENU TREE
12. SERVICE CENTRE and CERTIFICATE OF WARRANTY
25
25
25
26
26
26
27
29

5
INTRODUCTION
Dear User,
Thank you for purchasing the Maxi-Buffet® vending machine, a product manufactured by
ELEKTRAL. As a company developing integrated production, our quality certified production
has continued since 1978 based on high technology. This integration can be broadly
described as R&D, Electronics, Electro-mechanics, Production Lines, Mechanics Workshop,
Moulding Workshop, Plastic Injection and Vacuum Forming Group. With T.R. State Planning
Organization's various incentives, the factory has reached an approximately 20,000 m2
production area with the capability of making many electronic machines and components for
professional use. Most of our machines have been produced for the first time in our
fatherland. Starting with Germany, our company is technologically cooperating in terms of
production, representation and OEM production with the sector’s leading companies from
UAE, Bulgaria, India, Great Britain, Iran, Israel etc. We have direct or indirect exports to
countries in Europe, Asia, America, Africa. Furthermore, to expand our direct sale markets in
foreign countries our intensive works and exhibition activities continue uninterruptedly. As a
result of our rapidly growing export potential, our company has been awarded with a first
place prize in 2004, during "Rising stars of e-commerce in Turkey" competition. The same
year we were awarded with the “25’th Anniversary Award of EBSO (Aegean Area Chamber
of Industry), “The Chamber of Industry, Innovation, Employment” with continuous R&D
projects being supported by TUBITAK (Turkish Scientific Research Council). In 2011 Istanbul
Chamber of Industry has chosen our company as "INNOVATION FINALISTS". In the year
2012, with its innovative Vending Machine project, Elektral has been awarded as an “TET
(Turkish Electro Technology) R&D Project Market Finalist” by the Ministry of Economy,
Turkish Export Assembly and IMMIB (Istanbul Mining and Metal Exporters Union). Another
award won by Elektral is “The year 2013 First Rank in Innovation” organised by IAOSB
(Izmir Ataturk Industrial Zone)-Ege University. Believing that real growth target is to be
achieved with a global industrial understanding and a global move, Elektral is motivating all
its employees with this understanding and continues rapidly with an intensive R&D work to
reach determined goals.
Tru-VEND® vending machines have been designed and produced to provide more spare
time to its owners. They ease your life in various situations with multipurpose and practical
use. Our products provide you profit and comfort for 24 hours continuously, loyal to the
owner, with no employee costs. Please note that as for all industrial machines, its necessary
to periodically check and maintain your machine. Please use the machine as recommended
in this manual.
Elektral Products are produced in environmental friendly facilities,
causing no harm to the nature and living creatures.
 Made in Turkey
 Alteration rights reserved
 No claims can be accepted by our firm
regarding the applications of this instrument
from the second or third parties.
 All rights Reserved

6
OPERATION AND SAFETY WARNING
Procedures & Safety Warnings before using the Maxi-Buffet®
Technical specifications of the Maxi-Buffet®
Installation of the Maxi-Buffet®
Maxi-Buffet®Programming and further procedures
The arrow-end lightning symbol inside the
equilateral triangle informs that in the context of
the product, there is enough amount of ‘not
insulated’ dangerous voltage to cause an electric
shock.
The exclamation mark inside the equilateral triangle
informs the user that there are important instructions of
usage and information inside the booklets given with the
equipment.

7
Maxi-Buffet®BEFORE USE AND SAFETY WARNINGS
Maxi-Buffet®TruVEND Vending Machine is secured by three
electronic PIN CODEs and two mechanic locks which only allows the
owner to operate the machine. Please do not share your PIN CODE. If
you forget or lose the code, get in contact with our factory premises.
Maxi-Buffet® Do not wet the machine. Please unplug and use only a
damp cloth to clean the vending machine.
Only use the vending machine on Earthed Electrical Supply.
Please carefully read the chapters where you see this Warning Sign in
the User’s Manual.
With Cooling: 220 VAC ±%10 50 Hz, ±
Without Cooling: 90-260 V AC 50-60 Hz, is designed to operate
between given electrical limitations.
WARNING: Please follow the instructions given in the User’s Manual.
Incorrect usage can cause damage to the Vending Machine and the
environment.

8
1. GENERAL DESCRIPTION
The Vending Machine that you have chosen has been produced by our factory using high
technology systems in parallel with other developing technologies and modern aesthetic
design providing versatile usage. Tru-VEND® Vending Machines can be used in all public
areas such as hotels, factories, hospitals, restaurants, clinics, cinemas, bus terminals, gas
stations, doctor & lawyer offices, malls, etc. Backwards traceability is also possible on the
performed machine modifications by the serial number on each machine.
• International norms, In conformity with CE Norms and produced under ISO 9001:2008
QMS
• Fully Microprocessor Controlled MDB Interface, high storage capacity EEPROM
• Full-View Multi-Selection Snack
Vending Machine with Large Double
Glazed LOW E Glass Front
• Total 6 Trays, 54 Selections (513
Product Storage Capacity/Max. 7 Trays
Optional)
• Easy to Load beverage/snack vending
machine
• Large advertisement panel and Ad
Space on Both Sides
• User Friendly Interface with Graphical
LCD Display
• Easy Different Tray and/or Selection
Pricing Feature
• Decorative 3x4 User Friendly
Capacitive Touch Keypad
• Integrated Coin Return Button
• BITE (Built-in Test Equipment)
automatically Fixing problems and/or
Warning Messages on Graphical LCD
• Automatic Currency Recognition as per
installed Payment System
• Easy firmware update with Bootloader
• Time/Date Function Enabling
Timetable Pricing
• Preset timetable Power Saving Mode
with programmable low temperature
level
• Electronic thermostat controlled wide range cooling feature and high capacity cooler
(Optional)
• Various Temperature Zone Operation with Optional Cooling and Temperature Display on
LCD
• Silent and Vibration Free Operation
• Swinging and counterbalanced Self-Locking product dispensing slot
• Ensures reliable operation with IR Product Sensor
• Switch Controlled Menu Entry with Digital PIN Code Protection and two level Password
(Owner-Operator)
• Two Stage ALARM against Vandalism. Audio Alarm against unauthorized door opening and
impact sensor
• Highly corrosion-resistant production material
• 1 Year Warranty as per our “General Conditions of Sales, Delivery & Warranty”

9
2. MAIN UNITS
a- Stock Tray: Extra Storage Area for Products, User’s Manuals etc. items
b- Product Trays: Described under Chapter 2.1
c- Compartment: Where Products fall before being picked; Product dispense hole.
d- Control Panel: Described under Chapter 2.2
e- Mechanical Lock: There are Two Mechanical Locks and they are same
f- Payment System Installation Panel: This part is used for installing Coin Selector/Change
Giver/Bill Validator and Cashless Systems, Coin Return Push Button and Coin Return Chute
g- Front Blinds
h- Main Electronic Module
i- Power Supply Module
J- Power distribution board electronic module.
k- Graphical LCD
l- Keypad
a
b
c
d
e
e
h
g
f
i J
k
l
m
n o
p
qr
s

10
m- Bill Validator (Optional)
n- Change Giver (Optional)
o- Change Giver Tubes
p- Coin Return Push Button
q- LED Illumination Module
r- Control Cover: In case of failure, the hardware is used for ease of access
s- Cash Box
2.1 Product Trays
Filling up the Vending Machine and Placing the Products to the Trays
The vending machine has 6 Trays (+1 optional). In the machines with an optional cooling
unit, cold products can be placed in the bottom three trays. To avoid any damage, place
any breakable and heavy products into the trays close to the dispense compartment.
To place products to the Trays:
• Open the vending machine front door to be at 180° angle with the machine. Gently hold
the tray upwards and pull.
• Adjust the spiral to drop the product in easily by pulling the spiral forward, turn and let
go for the proper start position.
• Start loading the products from the inner spiral slots for your convenience.
• Place only one product in each slot.
• The total weight capacity of a tray is ~55 kg (depending on the product loading/stacking
pattern in the tray)
The tray will stay on hold once it reaches the loading position with the help of its wheeled
self-locking shelf assembly.
There are two position trays for easy product loading.
However, in loading position you may load max. 10 kg heavy products and rest should be
loaded when the tray is pushed back into its place. For this reason, starting to load the inner
slots first is essential.
It is possible to change the spiral steps, sizes and loading capacity, depending on the
available spiral types (maximum number of trays can be 7).
WARNING: Placing the products incorrectly may cause failure on
dispensing the products.
19 14 12 8 6
8 10 14 19
19 14 12 8 6 8 10 14 19
19 14 12 8 6 8 10 14 19
6 6 6 6 6 6 6 8 8
6 6 6 6 6 6 6 6 6
6 6 6 6 6 6 6 6 6

11
WARNING: When pulling the trays out, make sure the front door is
opened with a 180° angle. Otherwise the Rubber Front Door Gasket can
be damaged.
2.2 Control Panel
All operational controls can be followed on the Graphical LCD Screen, also Payment Systems
and Touchpad Keypad are installed on this panel.
2.2.1 Capacitive Touch Keypad
This is used for selecting products and vending machine settings,
explained in details under programming section. (IP 65 Weather
proof Anti-vandalism Metal Keypad is Optional.)
2.2.2 Graphical LCD Screen
All operations are being displayed on the Graphic Liquid Crystal
Display-GLCD for easy usage. Will be referred as GLCD thereafter.
2.2.3 Payment System (Optional)
Coin Selector accepts pre-defined coins for the payment
processing. It recognizes the domestic currency which had been
programmed. The mechanism will not accept the currency which
has not been defined and will be returned through the Coin Return
Chute.
The system has Automatic Currency Recognition feature as per the
assembled Payment System.
The Vending Machine which is eligible for MDB protocol can be
equipped with Change Giver, Coin Selector, Bill Validator and/or a
combination of Bill Validator and Change Giver, Cashless Payment
Systems as per customers’ choice.
Please note that the Payment System is Optional and not all Maxi
Buffet Vending Machines are Equipped with a Payment System.
2.2.3.1 Coin Selector
Accepts coins only. This equipment can accept different types of
coins. There is no Change Function.
2.2.3.2 Change Giver
There are 4 tubes (may change as per the ordered model) where the coins are being
collected for change giving. The coins of the main currency defined to the device are being
collected in these 4 tubes to be used later for change giving. Once the tubes are full, coins
are sent to the Cash Box under the Change Giver Unit automatically. The coins are collected
in the Cash Box.
Please check Chapter 4.2.1.1 for the settings of the Change Giver Unit.

12
2.2.3.3 Bill Validator
The bill validator accepts only the pre-defined banknotes and proceeds with
the payment process.
It recognizes the currency bills which had been programmed and returns the
unidentified or counterfeit banknotes. It can be used at the same time with
either MDB Supporting Change Giver or Coin Selector.
2.2.3.4 Prepaid Card System (Cashless Payment Device)
This application enables the customers to shop without using Money. A
Prepaid Card is used instead. This cashless system enables the customers to
load credit to their cards and use their credits for shopping on the Vending
Machine. When inserted into its slot on the Vending Machine, the available
credit of the User is displayed on the GLCD. Customers may easily load credits
into their cards by inserting Money and the shopping value is being deducted
from their credits.
2.3 Coin Return Push Button
This button is used for getting the change after shopping. After pressing this
button change can be collected from the Coin Return Chute.
2.4 Coin Entry Slot
This entry slot is used for inserting coins into Vending Machine. Coins are
being placed into the slot then simply being pushed upwards.
Inserted coin value can be seen on the screen. If the inserted coin is not
defined or is an imitation then the coin drops down to the Coin Return Chute
and is not accepted.
2.5 Coin Return Chute
This chute is for the change and/or coins which cannot be validated.
Coins can be collected after falling into the return chute.
2.6 Cash Box
Cash Box is where accepted coins are collected (excess money over tubes). For increased
security the cash box has a padlock.
The cash box has to be checked and emptied periodically or the cash box can be filled up
with coins and coins may drop around which may cause problems.
2.7 Electronic Modules
Maxi-Buffet is fully microprocessor controlled and the electronic modules in use are as
follows:
a) Power distribution board electronic module: This module is used for distributing energy to
the Vending Machine. With its two fuse control this unit helps preventing possible electrical
problems which may be caused by other electronic modules or the optional cooling unit and
it provides increased safety.

13
b) Power Supply Module: This module is to provide DC Voltage.
c) Main Electronic Module: All functions of the Maxi-Buffet Vending Machine are being
controlled by this Module.
d) Capacitive Touchpad Keypad
e) Graphical LCD Screen
f) IR Product Sensor: This module is used for checking the Proper Physical Vending Process.
If there is no real vend then the credit will remain so that another product can be selected
or the credit can be taken. (Chapter 4.2.1.2)
g) Illumination electronic module.
Please contact our Technical Service for any failures on electronic
modules.
3. VENDING MACHINE SAFETY
There are many security precautions against theft and other vandalism possibilities with the
Maxi-Buffet®.
The Cabinet and the Low-E Glass Front have been designed with maximum safety using
robust production materials. There are Security Locks on the Vending Machine and the Cash
box.
There are three security passwords as electronic security precautions.
a) Alarm Password: This password has to be entered prior to opening the door of the
Maxi-Buffet. When opened without entering password, the Maxi-Buffet will give a
120db audio alarm. After 10 seconds the front door is closed, the alarm is activated
automatically. Default alarm password is “1234 ”.
b) Administrator Password: This admin level password enables Access to all settings of
the Maxi-Buffet. Default administrative password is “8888 ”.
c) User Password: This level menu entry enables Access to menus which are authorized
by the administrator. (Chapter 4.2.1.8) . Default User Password is
“ 0000 ”.
Note: The Administrator Password and the User Password cannot be the same.

14
SETTINGS
VALIDATORS
IR SENSOR
COOLING UNIT
DATE-TIME
LANGUAGE SETTING
CHANGE PASSWORD
STATISTICS
SALE COUNTER
CASH COUNTER
ERRORS
RESET
GET REPORT
www.elektral.com.tr
READY TO OPERATE
INSERT COIN/BILL
7° C 12:34:03
ŞİFRE DEĞİŞTİRME
MAIN MENU
SETTINGS
STATISTICS
PRICES
MACHINE TEST
ACCESSORIES
DEVICE INFO
MAIN MENU
SETTINGS
STATISTICS
PRICES
MACHINE TEST
ACCESSORIES
DEVICE INFO
PASSWORD
[****]
4. PROGRAMMING
All programming settings of the Maxi-Buffet®can be done using the
Touchpad Keypad on the Control Panel. Keypad buttons are as follows;
XEXIT/NO
√SAVE/YES/SELECT
8 Up Arrow to Scroll Up
0 Down Arrow to Scroll Down
7To copy the selected value in some menus i.e., Price
Settings
9To Paste the copied Value
Number Keys 1 to 9 are used for entering values.
To silence the alarm enter 1234 default alarm password.
To enter programming menu press ‘8888’ in sequence.
Open the front door of the Maxi-Buffet and open the
protective door to access the main electronic board. Press
the button on the Main Board (BUT1)to enter the menu.
Enter the ‘Administrator Password’ or the ‘User Password’
using the keypad.
SCROLL IN THE MENU Using (8) UP and (0) DOWN keys
and Select the desired Menu by (√) SELECT.
4.1 Main Menus
Settings: Selection of Payment System, Date-Time
Settings, Cooling Unit Settings, Password Settings etc.
Settings can be done in this menu.
Statistics: All statistical information available can be seen
inside this menu.

15
PRICES
PRICE SETTINGS
EXCHANGE OF RATE
DISCOUNT
MACHINE TEST
MOTOR CONTROL
IR CONTROL
MOTOR STATUS
VALIDATORS
TOUCHBOARD
RELAY CONTROL
ACCESSORIES
ALARM
BILL
GSM/GPRS
TILT SENSOR
VALIDATORS
SERIAL PROTOCOL
MDB SETTINGS
EXECUTIVE SETTINGS
CCTALK SETTINGS
impMDB SETTINGS
PARALLEL SETTINGS
Price Settings: This menu is for setting Prices, Currency
Settings and Discount Rates.
Machine Test: This menu is for testing the hardware
equipped on the Vending Machine (motors, IR Product
Sensor etc.).
Accessories: This menu is for the settings of Alarm,
Impact Sensor and GSM/GPRS etc. accessories available.
4.2 Menus
To enter sub menus, you need to enter Main Menus and scroll. using SCROLL Keys find the
Menu you wish to proceed and press (√) SELECT.To proceed with entering new values
press (√) SELECT button to save the changes press (√) SELECT again or Exit with (X)
button.
4.2.1 Settings Main Menu
4.2.1.1 Payment System
WARNING: The standard Coin Mechanisms installed on the Maxi-
Buffet®are compatible with MDB protocol. If there will be another
Coin Mechanism in use with the following protocols; EXECUTIVE,
PARALEL and CCTALK the compatible Coin Mechanisms should be
installed and the Protocol has to be selected from the Menu. If by
mistake a different protocol (other than MDB) is selected from the
Menu, the Maxi-Buffet®will not accept any money and will return all.
This menu is used to change the standard settings of the
payment system.

16
SERIAL PROTOCOL
MDB
EXECUTIVE
CCTALK
impMDB
PARALLEL
MDB SETTINGS
MAX. WAIT 60
MAX CHANGE 20.00
MAX. ACCEPT 20
ERASE CREDIT
FREE VEND
CHANGE BACK
4.2.1.1.1 Serial Protocol
This menu is used for selecting the Payment System in
use.
Use UP (8) and DOWN (0) Scroll Keys and (√)
SELECT.
4.2.1.1.2 MDB Settings
This menu is for MDB Payment System Settings.
Maximum Waiting: Waiting Period after money
insertion. After threshold period the Value on LCD will
reset to Zero and money will be collected inside the
Vending Machine.
Maximum Change: This menu is to set the Maximum Change Value.
Erase Credit: This parameter is used to define whether to reset or not to reset the Credit
Value after a Certain Waiting Period upon money insertion. Full bracket (X) means this
feature is active.
Free Vend: This feature enables free distribution of products with prices set to ‘0’. Full
bracket (X) means this feature is active.
Change Back: This parameter is used for activating or deactivating the Change Function.
Full bracket (X) means this feature is active.
Manual Dispense: This parameter is used to activate or deactivate Manual Dispensing of
the Coins in the tubes using the buttons on the Change Giver unit. Full bracket (X) means
this feature is active.
Free Change: This parameter is used to activate or deactivate the Change Function
without purchasing any product from the Vending Machine. Full bracket (X) means this
feature is active.
Automatic Change: This feature enables automatic Change without the need to press
Coin Return Push Button. Full bracket (X) means this feature is active.
Big Value Mode: This mode is for some currencies which have very little purchase value
and the Note Values are very high i.e. 1000 etc. to display a Product Price of 12000 in Big
Value Mode 12k is used in short.
Coin XX: This parameter is to set the acceptance status of the nr. XX Coin. Full bracket ( X)
means this feature is active.
Bill XX: This parameter is to set the acceptance status of the nr. XX Bill. Full bracket (X)
means this feature is active.
4.2.1.1.3 EXECUTIVE Settings
This menu is for EXECUTIVE Payment System Settings.
Price Holding: This parameter displays the Status of Price Holding function. Full bracket
(X) means this feature is active.

17
COOLING UNIT
UNIT : ON
SET : 8ºC
ECO-MOD : ON
SET : 15ºC
ECO-TIME : 22:00 – 07:00
DATE - TIME
13:44
2012.06.08
FRIDAY
SETTINGS
VALIDATORS
IR SENSOR
COOLING UNIT
DATE-TIME
LANGUAGE SETTING
CHANGE PASSWORD
IR SENSOR STATUS
OFF
Free Vend: This feature enables free distribution of products with prices set to ‘0’. Full
bracket (X) means this feature is active.
Product (XX): When in Price Holding operation mode these values become active. This is
to mention that Nr. XX product belongs to Nr. XX Value in sequence.
4.2.1.1.4 CCTALK Settings (Optional)
This menu is for CCTALK payment system settings.
4.2.1.1.5 Imp MDB Settings (Optional)
This menu is for MDB payment system settings.
4.2.1.1.6 PARALLEL Settings (Optional)
This menu is for PARALLEL payment system settings.
4.2.1.2 IR Product Sensor
This menu is to activate or deactivate the IR Product Sensor.
IR Product Sensor checks if the product is delivered to the
customer or not.
WARNING: If the IR Sensor is deactivated, the vending machine
will not be able to check product delivery conditions and the
presence or lack of products in the machine trays.
If the IR product sensor determines that a product is not delivered,
the related selection (Spiral) is deactivated and customer credit
remains active on Graphic LCD for another vend.
If there has not been a product dispense upon 5 vends in a row, the
IR product sensor turns off itself. The Vending Machine operates
without IR product sensor. It can be re-activated from the menu
again.
4.2.1.3 Cooling Unit (Optional)
This menu is for Cooling Unit Settings. Using the menu
you may activate and/or deactivate the Cooling System,
proceed to temperature settings and the Economy-Mode
Operation Settings for certain periods.
4.2.1.4 Date-Time Settings
This menu is to set Time and Date. Press (√) SELECT
button to enter value settings. The values can be entered
in sequence. Wrong entries are not accepted. Weekday is
automatic as per Date Settings.
ON

18
LANGUAGE SETTING
TURKISH
ENGLISH
GERMAN
SPANISH
CHANGE PASSWORD
ADMIN PASSWORD
USER PASSWORD
ALARM PASSWORD
ILLUMINATION
LED SETTINGS
ILL – MOD : ON
ECO - MOD: ON
ECO - MOD: 20:00 – 07:00
SETTİNGS
DATE
LANGUAGAE
CHAN
LIGG
DEFAULT SETTINGS
4.2.1.5 Language Setting
This menu is for Language Selection. Desired Language
can be highlighted and selected with button (√)
SELECT.
Languages other than Turkish and English are Optional.
4.2.1.6 Change Password
Move onto the Password you want to change using UP
and DOWN arrow Keys and press (√) SELECT. First, you
need to enter the old password. If the old password is
correct then you may proceed next and Enter the New
Password. For approval you need to re-enter the New
Password.
Admin Password: This password enables Access to all settings of the Maxi-Buffet. Default
administrative password is “ 8888 ”.
User Password: This level password entry enables Access to menus which are authorized
by the administrator. Default User Password is “ 0000 ” and cannot be the same with
the Admin Password. Please check Chapter 4.2.1.8 Authorization.
Alarm Password: This password has to be entered prior to opening the door of the Maxi-
Buffet. When opened without entering password, the Maxi-Buffet gives a 120db audio
alarm. The alarm is being activated automatically after 10 seconds the front door is closed.
Default alarm password is “ 1234 ”.
4.2.1.7 Illumination
4.2.1.7.1 Illumınation Power
This menu is for adjusting the Power of LED Illumination of
the Low-E Glass Front.
Adjustment can be made using UP (8) and DOWN (0)
Buttons.
4.2.1.7.2 LED Settings
Using the LED settings, economy mode can be activated
to save energy. During the economy mode lighting is
turned off for the adjusted time limit.
4.2.1.8 Authorization
This menu is to set the Access limitations of the User
Password by the administrator.
Full bracket (X) means this feature is active.
4.2.1.9 Factory Settings
RETUN TO DEFAULT
SETTINGS?
YES NO

19
SALE COUNTER
PROD. (11): 0 pcs.
PROD. (12): 1 pcs.
PROD. (13): 9 pcs.
PROD. (14): 3 pcs.
PROD. (15): 4 pcs.
PROD. (16): 5 pcs.
CASH COUNTER
TOTAL VM REVENUE 158,25 EUR
NET REVENUE
GROSS REVENUE
DISCOUNT SALES
TOTAL DISCOUNTS
ERRORS
ERROR (01): 052-11
06.09.10 12:10 (3)
ERROR (02): 068-02
ERROR (03): 000-00
ERROR (04): 000-00
ERROR (05): 000-00
4.2.2 Statistics Main Menu
4.2.2.1 Sale Counter
This menu displays the total number of products sold
after the last reset.
Each and every Product Selection can be chosen and
Reset to Zero.
4.2.2.2 Cash Counter
This menu displays the total amount of cash in defined
currency.
Total VM Revenue: Displays the Total Cash collected by
the VM. This Value cannot be reset.
Net Revenue: This is the Net Amount collected by the
VM. This value can be reset.
Gross Revenue: This value is for the total amount of sales excluding discount amount of
Discount Sales. This value can be reset.
Discount Sales: This value displays the total revenue generated whilst discount period.
This value can be reset.
Total Discounts: This value displays the total discounts applied. This value can be reset.
Overpaid: This value is to display remaining (overpaid) credit reset in the machine. This
value can be reset.
Normal Sales: This value displays the sales amount without any discounts applied. This
value can be reset.
Cashless Total: This value displays the sales amount without paid by Cashless Payment
System. This value can be reset.
Cash Box Total: This value displays the total amount of money collected in the cash box.
VM equipped with Change Giver first collects the coins into its tubes then fills up the Cash
Box. This value can be reset.
Stacker Total : This value displays the amount of Banknotes Collected in the Bill Validator
Stacker.
Tubes Total: This value displays the amount of Coins in Change Giver Tubes.
4.2.2.3 Errors
Pre-defined Error Codes are as mentioned hereunder;

20
RESET
SALE COUNTER
CASH COUNTER
Parameters shown on GLCD are to display current settings of the Maxi-Buffet®as
follows;
1 Door Open
2 IR Product Sensor Off
3 Alarm Off
4 Impact Sensor Off
5 No Change
6 IR Sensor Problem Occurred
7 Motor Error Occurred
8 Machined Reported an Error
4.2.2.4 Reset
Parameters shown on GLCD are to display current settings
of the Maxi-Buffet®as follows;
This menu is used for resetting whole values kept in the
Statistics Menu. Press (√) SELECT and confirm the
application.
4.2.2.5 Get Report (Optional)
This menu is to report Values in the Statistics Menu.
# Change Giver Error Codes # Other Error Codes
01-003 No Credit1
50
51
Motor Error 3
Extreme Current on Motor
01-004 Defective Tube Sensor1 52 Motor Error 1
01-005 Double Arrival1 53 Motor Error 2
01-006 Acceptor Unplugged2 54 Heat Sensor Error
01-007 Tube Jam1 56 EEPROM Error
01-008 ROM checksum error1 58 Flash Error
01-009 Coin Routing Error1 60 Keypad Error
01-012 Coin Jam1 62 RTC Error
01-013 Possible Credited Coin Removal1 64 IR Error 1
65 IR Error 2
# Bill Validator Errors 66 IR Error 3
02-021 Defective Motor3 67 IR Error 4
02-22 Sensor Problem3 68 MDB Communication Error
02-24 ROM Checksum Error3 70 WDT Reset Error
02-25 Validator Jammed3 71 Brownout Reset Error
02-27 Bill Removed1 74 Address Error
02-28 Cash Box out of position3
02-30 Invalid Escrow request1
02-32 Possible Credited Bill Removal1
76 Trap Conflict
78 Change Giving Error 1
79 Change Giving Error `2
83 Motor Short Circuit
84 Tray Short Circuit
86 High Side Problem
9X Change Giver Advanced
Malfunctions