Westomatic Elevate User manual

ENTERING SERVICE MODE

IMPORTANT
How it works:
When the door is opened the machine automatically switches off.
When the door contact switch is broken the machine control
board switches off.
By using the door service key the machine can switched on and
operated in service mode

Open the machine door but DO NOT pull out the sliding door unit.
Insert the service key and turn 90° clockwise.
Allow the machine to carry out the start routine - during which the
illumination is switched on and a reference run carried out. For
this reason the sliding door unit must remain inside the machine.
The reference run is completed when the product basket returns
to the home position - bottom left.
The service key should not be left in the machine - and remember
to remove it before closing the door!
1 - U S I N G T H E S E R V I C E K E Y

Do not open the sliding door unit
Wait for reference run to complete
Product basket in home position
S E R V I C E K E Y I N P O S I T I O N

When the reference run is
complete and the Product
basket is in the home position.
The Sliding Door Unit can be
pulled out .
The red button allows you to
enter service mode on the
screen.
2 - T H E S E R V I C E B U T T O N

W e s t o m a t i c V e n d i n g
S e r v i c e s L t d ,
U n i t s 7 - 8 F o r d e C o u r t ,
B l o c k 4 F o r d e R o a d ,
N e w t o n A b b o t ,
T Q 1 2 4 B T
+ 4 4 ( 0 ) 1 6 2 6 3 2 3 1 0 0
s a l e s @ w e s t o m a t i c . c o m
w w w . w e s t o m a t i c . c o m
C O N T A C T