Elite Screens Insta-DE 2 Series User manual

Rev101612-JA www.elitescreens.com/ide2 1
Insta-DE 2 Series
Dry-Erase Front Projection Screen Film
User’s Guide
Product Features
Award winning and GREENGUARD certified VersaWhite material.
1.1 gain with 180 degree wide viewing angle.
Special anti-scratch layer to ensure long use as a dry-erase/projection screen.
Anti-reflection diffusion surface eliminates glare and hot-spot while using a projector.
Application Advantages
Instantly converts flat surfaces/walls into a dry-erase whiteboard projection screen.
Includes adhesive black velveteen border to enhance contrast and overall appearance.
Perfect dry-erase and projection solution for today's short throw projectors.
Ideal and effective instructional presentation tool in the classroom, boardroom, and training facilities.
Product specifications
Specifications:
Color display
White
Thickness
2.1mm
Material composition
High molecular weight copolymer
of Terephthalic acid ethyl esters
Weight
1m2/377g
Temperature
At room temperature
Gain
1.1
Viewing Angle
160∘

What’s in the package
Please make sure all parts listed below are included.
a b c d e
f g h.
Model Number
No powder bag
1 bag(25g)
2 bags (50g)
3 bags (150g)
IWB86VW2
X
IWB97XW2
X
IWB105HW2
X
IWB4.2x10W2
X
IWB4.2x20W2
X
IWB4.2x30W2
X
Notes: For best results and maximum product longevity, ALWAYS and ONLY use a high density whiteboard Eraser.
Preparation
The Insta-DE 2 product is to be solely installed on flat surfaces. Prepare the flat wall/surface by cleaning
the entire area. Do not install if any imperfections are found on the surface such as drilled holes, glue/tape
residue, dents, etc. We recommend sanding the area first to make sure you have a clean flat and smooth
surface. Failure to remove such imperfections can damage the product. The dry erase function of this
product requires a smooth writeable surface and Elite Screens is not responsible should these instructions
are not be properly followed.
Take the Insta-DE 2 film roll out of the package and unroll it on a clean surface and lay it on its front side.
Parts List
QTY
a. Insta-DE 2 Screen Material Film Roll
1
b. Double-sided adhesive tape
1
c. Self-stick cradle
1
d. Whiteboard pens
2
e. High density eraser
2
f. Microfiber cleaning cloth
1
g. Black velvet border adhesive strip roll
1
h. Powder compound (xanthan gum)
See chart below for details
1-3

Rev101612-JA www.elitescreens.com/ide2 3
Installation using double-sided tape
For models IWB86VW2, IWB97XW2, and IWB105HW2
1. Begin by marking the size of the screen size to be installed on the wall or surface.
2. Peel off one side of the double-sided adhesive film
tape and apply it from top to bottom (vertically)
every four to six inches apart from one end to the
other.
3. After the double-sided tape has been applied, completely peel off the first strip and peel off the
rest about an inch as shown below.
Two people required:
4. Carefully pick up the Insta-DE2 film and make sure the back side is facing the wall it will be
installed on. Do not allow the film to fold in any way to avoid permanent damage.
Note: The back side of the Insta-DE2 is shinny.
5. Gently bring the Insta-DE2’s edge as close as possible to the
installation area, align it, and gently press on the Insta-DE 2
with your fingers in a up and down sliding motion to finish
attaching the first end. Continue to completely remove the
remaining tape strips and repeat procedure on strip at a time
to ensure no air bubbles/pockets are created.
6. Repeat the process throughout the rest of the material and
use the smoothing tool in an upward and downward motion
to assure a flat installation and to remove any air
bubbles/pockets that could arise.
Caution:
The adhesive surface of the double-sided tape is meant to be permanent for the life of the product. It
does not remove easily. Please attach very carefully to avoid having to remove the product and
positioning it in a different location.
Tape strip completely removed

Rev101612-JA www.elitescreens.com/ide2 4
Installation using the powder compound
For models IWB4.2X10, IWB4.2X20, and IWB4.2X30
1. Begin by marking the area of the screen size to be installed on the wall or surface.
2. Pour an entire powder bag into a spray bottle and mix with 27 oz. of room temperature water and
shake well. This will make the mixture into an adhesive compound for sticking the film to the wall.
Note: Once the liquid adhesive has been mixed, it must be applied within 4 hours to ensure a sealed
installation of the Insta-DE2 to the wall. Use one bag for every 27 oz of water.
3. Spray the adhesive evenly on the wall within the marked area where the Insta-DE2 screen will be
applied.
4. Carefully pick up the Insta-DE2 film and make sure the back side is facing the wall it will be
installed. Be careful and do not allow the film to fold in any way to avoid permanent creasing or
wrinkles. Note: The back side of the Insta-DE 2 is shiny.
5. Align the edge of the Insta-DE2 to the marked area that now has the adhesive compound and attach
it to the surface. Once the edge has been glued to the surface, repeat the process in 3-4 feet increments
making sure to flatten the material along the way to avoid creating air bubbles/pockets.
6. Repeat the process throughout the rest of the material and use a flexible wall covering smoothing
tool (not included) in an upward and downward motion to assure a flat installation and to remove any
air bubbles/pockets.
7. Use a soft damp cloth to clean and remove any residue from the adhesive compound.
Caution:
The adhesive compound is meant to be permanent for the life of the product. It does not remove easily. Please
attach very carefully to avoid having to remove the product and positioning it in a different location.

Rev101612-JA www.elitescreens.com/ide2 5
Adhesive Black velvet border installation
1. Measure the top/bottom and left/right sides of the Insta-DE2 screen to obtain the required length of
the velvet border you will need to use for bordering your screen.
2. Peel a small portion off of the velvet border and place it about half an inch over the white area of
the screen. Continue to peel off and roll out the remainder of the velvet border until you have reached
the end and cut the edge.
Note: For best results we recommend cutting the edge in a 45° angle.
3. Repeat the process for the remainder of the sides until all sides are bordered as shown below.
Safety Precautions:
A. Avoid using sharp objects directly on the screen which can result in permanently damaging the
product and voiding your warranty.
B. Creases or wrinkles caused by improper installation are not removable.
C. The adhesive powder compound (xanthan gum) does not have any biological hazards. Excess of
this product therefore can be simply diluted with water and discharged into the sewer.
XANTHAN GUM
PRODUCT IDENTIFICATION
CAS NO.
11138-66-2
EINECS NO.
234-394-2
FORMULA
(C35H49O29)n
MOL WT.
> 10,000,000
H.S. CODE
1301.90.0000
TOXICITY
SYNONYMS
Corn sugar gum; Xanthan; Gum xanthan;
Polysaccharide gum; Other RN: 9088-32-8; 12673-42-6; 12771-06-1; 37189-49-4; 37279-85-9; 37332-19-7; 37383-52-
1; 39393-27-6; 39444-54-7; 51811-95-1; 54511-23-8; 56592-13-3; 80450-59-5; 82600-55-3; 85568-76-9; 98112-77-7;
478314-71-5
CLASSIFICATION
Polysaccharide
CATEGORIES
Thickener, Viscosity-increasing agent, Suspending agent, Stabilizer, Emulsifier
PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE
white to light yellow powder
SOLUBILITY IN WATER
Soluble
pH
6 - 8 (1% aq sol.)
VISCOSITY
2000 cps (1% aq sol.)
STABILITY
Stable under ordinary conditions. Hygroscopic
For more information, technical support or your local Elite Screens contact, please visit
www.elitescreens.com