Elite Screens Pop-Up Cinema Series User manual

070114-ESA www.elitescreens.com 1
Pop-Up Cinema Series
Indoor/Outdoor Portable Pop-up Projection Screen
User’s Guide
Thank you for choosing the Pop-Up Cinema portable projection screen! Please read through this user
guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.
Parts List
A. Carrying Bag x1
B. Screen x1
C. Net Base x1
D. Support Bar x2
E. Stake x4
Note: The parts list above is subject to change without notice.
Installation Set-Up:
1) Take out the screen and net base from the
carrying bag and expand them.
2) Connect the Screen to the net base.
Projection Screen
Net Base
Velcro Connection

070114-ESA www.elitescreens.com 2
3) Insert the support bar behind the screen and then
connect the rod sections so that it is at maximum
length.
4) Ground the net base with the stakes.
Disassembling the screen
1) Step on the back end of the screen and bring
middle part of screen or net base towards you
approximately 12” from your foot and hold that
down stepping on it with your other foot.
3) Bring the right side in toward your left foot and
bring the left side towards your right foot.
2) While holding the material down with both feet,
lean forward and grab the left and right side.
4) With your feet in position, bring both left and
right sides in towards the ground.
Support
Bar
Connector
Support Bar
Screen
Net Base
Stake
Stake
12”
Screen
Screen
1
2
Screen

070114-ESA www.elitescreens.com 3
5) Continue to bring the material down and remove
your left foot. Push the screen down and continue
to hold it in the compressed position. You should
now be able to insert it into the bag.
6) Repeat the above process with the net base to
ensure it will also fit in the carrying bag.
If a visual demonstration is needed, please view our disassembly video at:
www.elitescreens.com/video/popc-disassemble
Screen
Net Base