Elite Screens Insta-DE Series User manual

!
08102015EA!!!!!!!!!!!!!!!!!!!!www.elitescreens.com! ! !!!!!!!!!!!1!
!
Insta-DE Series
Soft7padded!Dry7erase!Whiteboard!Projection!Screen!
!"#$%"&'()*#&
Product Features
!Award winning and GREENGUARD certified VersaWhite
material.
!1.1 gain with 180 degree wide viewing angle.
!Special anti-scratch layer to ensure long use as a dry-erase
projection screen.! !
!
Application Advantages
!Instantly converts flat surfaces/walls into a dry-erase whiteboard projection screen.
!Includes dry-erase pens, eraser, and pen holder.
!Perfect dry-erase and projection solution for today's short throw projectors.
!Ideal and effective instructional presentation tool in the classroom, boardroom, and training facilities.
What’s in the package Pad
Please make sure all parts listed below are included. If anything is missing please contact us immediately.
!
&&&&&&&&&&&&&&&&&&&&+,&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&-,&&&&&&&&&&&&&&&&&&.,&&&&&&&&&&&&&&*,&&&&&&&&&&&&&&#,&&&&&&&&&&&&&&/,&&&&&&&&&&&&&0,&&&&&&&&&1,&
!
!
Notes:
1. For best results and maximum product longevity, ONLY use
Elite Screens high density whiteboard Eraser
2. Please use a microfiber cloth and clean water to cleanse the
surface every 2-4 weeks to maintain a fresh and clean
projection surface.
Parts List
Qty
+,&23"4+567&8.$##3&9+4#$)+:&
1!
-,&;#3&<=:*#$&
1!
.,&6=(-:#5")*#*&4+>#&$=::"&
See!table!below!
*,&?1)4#-=+$*&@+$A#$"&
2!
#,&7:)4#&">#.)+:&1)01&*#3")4B&#$+"#$&
2!
/,&C,D@@EFG@@&8.$#H&
1!
0,&;=H*#$&I=@>=(3*&
See!table!below!
1,&8@==41)30&J==:&
1!
Model Number(s)
Tape Qty
Powder Qty
iWB63VW
2
1
iWB84VW/iWB95XW/
iWB102HW/iWB4x10HW
2
1
iWB4x20HW
3
2
iWB4x30HW
3
3

!
08102015EA!!!!!!!!!!!!!!!!!!!!www.elitescreens.com! ! !!!!!!!!!!!2!
!
Tools Required (not included):
Carpenter’s Pencil Measuring Tape Shop towels Roller cover and frame Paint Tray 150 grit sandpaper
!
!!
Dust mask Safety goggles R-35 Primer
Pre-Installation Notice:
The Insta-DE product is to be solely installed on flat surfaces. Prepare the flat wall/surface by cleaning the entire
area. Do not install if any imperfections are found on the surface such as drilled holes, glue/tape residue, dents,
etc. We recommend sanding the area first to make sure you have a clean flat and smooth surface. Failure to
remove such imperfections can damage the product. The dry erase function of this product requires a smooth
writeable surface and Elite Screens is not responsible should these instructions are not be properly followed.
Take the Insta-DE Screen out of the package, unroll it on a clean surface and lay it on its front side.
Before applying the Insta-DE, the application surface must be dry, clean, smooth, and structurally sound.
1. Clean the surface to remove any dirt, grease, and wax.
2. Fill any depressions or holes with a drywall compound
3. Use sandpaper to smooth any bumps and blemishes. Sand until the surface is completely flat.
4. Level-5 finish to the surface and apply one coat of Professional R-35 primer
The warranty of this product will be voided if any bubbling occurs due to the use of an after-market
spray adhesive or if the screen was applied on to a textured wall.!
!
Installation
Double Sided Tape Installation- Only use this method for models iWB63VW/iWB84VW/iWB95XW. For
sizes larger sizes, refer to the glue powder compound method detailed on page 4.
1. Clean the location where the Insta-DE Screen will be installed.
2. Measure and mark the top-right and bottom-right corner of the installation location
Wal
l!
!

!
08102015EA!!!!!!!!!!!!www.elitescreens.com!!!!!!!!!!!!!!3!
3. Apply double-sided film tape all around the edges of the Insta-DE back padding.
4. Completely peel the entire left side (back) vertical tape strip and peel off a 1-inch length tape film on the
rest of the tape strips.
!
!
5. Attach the Insta-DE Screen to the top-right and bottom-right corner of the installation location.
!
!
6. Remove the tape film on the horizontal sides while unrolling the material and firmly attach to the taping
line with pressure.
!
7. Continue attaching the double-sided adhesive tape until you’ve reached the end.
!
!
!
8. Lastly, remove the entire vertical tape strip at the end, line up with the tape line to complete the
installation.
!
!
&
Wall!
Pen!holder!!
Wal
l!
!
Double7sided!tape!

!
08102015EA!!!!!!!!!!!!www.elitescreens.com!!!!!!!!!!!!!!4!
Glue Powder Compound Method for models iWB102HW/iWB4x10HW/iWB4x20HW/iWB4x30HW
We strongly recommend two or more people for this installation.
1. Smoothen the entire surface of the wall with sandpaper.
2. Clean the entire surface with a wet sponge or lint-free towel to remove any dust left from sanding the
wall.
3. Measure and outline the screen installation area.
4. Apply the included double-sided tap over the line. Do not remove the top film of the tape.
5. Pour an entire powder bag into a paint bucket filled with 25 oz. of room temperature water and stir until all
lumps are gone and the compound has a syrup texture. This will make the mixture into an adhesive compound for
sticking the film to the wall.
Note: Once the compound has been mixed, it must be applied within 4 hours to ensure a sealed installation of
the Insta-DE to the wall. Use one bag for every 25 oz. of water.
6. Pour the mixture into a paint tray and dip the roller.
7. Evenly apply a thin coat of adhesive to the surface evenly with a paint roller.
8. Wait for the adhesive to dry.
9. Sand the surface until no adhesive residue remains.
10. Apply one coat of Professional R-35 Primer (do not allow it to dry) and immediately apply the Insta-DE to
the wall.
11. Unroll the Insta-DE on to the wall lining it up with the drawn line from Step 1.
K=4#&L&6=&3=4&+::=H&41#&@+4#$)+:&4=&H$)3A:#&=$&.$#+"#&4=&+M=)*&>#$@+3#34&*+@+0#,&
&
&
&
&
&
&
&
!
!
!!!!!!Wall!!!!!!!!
cecececece!

!
08102015EA!!!!!!!!!!!!www.elitescreens.com!!!!!!!!!!!!!!5!
12. Flatten the surface with a flexible wall smoothing tool in a 45 degree angle to avoid scratching the surface.
!
!
!
!
!
!
!
I+(4)=3L!J1#&"@==41)30&4==:%"&#*0#&)"&"1+$>,&I+$#/(::B&".$+>#&41#&".$##3&H1#3&$#@=M)30&+)$&-(--:#"&4=&+M=)*&
".$+4.1)30&41#&"($/+.#,&
13.!Lift!edges!and!smoothen!out!any!remaining!air!bubbles.!
!
14.!Peel!off!the!top!layer!of!the!double7sided!tape!and!flatten!the!screen’s!edges!with!the!smoothing!tool.!
!
15.!Use!a!soft!damp!towel!or!sponge!to!clean!entire!surface.!
!
Pen!holder!installation!
9#41=*&=3#:!Peel!the!tape!strip!off!the!back!of!the!pen!holder!and!attach!the!pen!holder!to!the!wall!or!your!
preferred!location.!
9#41=*&4H=:!Install!the!included!screw!in!the!wall!and!hang!the!pen7holder.!See!diagram!below!for!details.!
!
&
I+(4)=3L!
The double-sided tape is meant to be permanent for the life of the product. It does not remove easily. Please
attach very carefully to avoid having to remove the product and positioning it in a different location.
!
Use!only!the!included!erasers!to!remove!and!erase!dry7erase!markings.!!For!a!deep!clean,!we!recommend!using!
a!non7alcohol!based!dry7erase!board!cleaner!with!a!soft!microfiber!cloth.!!!
!
Elite!offers!a!replacement!kit!(>+$4&3(@-#$&N7OF),!which!includes:!!
1!x!bottle!of!8.45!oz!cleaning!solution!
1!x!microfiber!cloth!
2!x!high!density!foam!erasers!
2!x!sets!of!dry7erase!markers!(4!total)!
For more information visit www.elitescreens.com/zer3
Contact your reseller or visit shop.elitescreens.com for pricing and purchase.

!
08102015EA!!!!!!!!!!!!!!!!!!!!www.elitescreens.com! ! !!!!!!!!!!!6!
Safety Precautions:
A. Avoid using sharp objects directly on the screen which can result in permanently damaging the product and
voiding your warranty.
B. Creases or wrinkles caused by improper installation are not removable.
!
Attention:!Prior!to!installation,!please!view!the!following!on7line!video!found!at!this!link!for!your!reference"!!
www.elitescreens.com/ide2install!(Same!method!for!Insta7DE)!
Below!are!sample!pictures!of!improper!installations.!
!
!
The above pictures are the result of improper installations.
!
For!more!information,!technical!support!or!your!local!Elite!Screens!contact,!
please!visit!www.elitescreens.com