ELRO AS90MA User manual

jK
AS90MA Manual EN Version 2
MANUAL
DOOR/WINDOW SENSOR
ACCESSORY HOME+ALARM SYSTEM
Home is not a place, it’s a feeling
AS90MA

- 1 -
Content
1. Introduction ................................................................................................- 2 -
2. Pairing with the app....................................................................................- 2 -
3. Important information................................................................................- 2 -
4. Battery.........................................................................................................- 3 -
5. Technical data.............................................................................................- 3 -
6. DoC..............................................................................................................- 3 -
7. Explanation of symbols ...............................................................................- 3 -
`

- 2 -
1. Introduction
Place magnetic contacts on doors and/or windows most likely to be used by burglars. Burglars do not like
to operate in plain sight. Therefore, they are more likely to enter the protected garden through the back
door than through the front door in a busy street. Don't forget windows/balcony doors that are easily
accessible from a flat roof, for example. You will receive a push message when the battery voltage is (too)
low.
2. Pairing with the app
The lithium battery must be activated, remove the plastic strip (4). Open the app on your smartphone, tap
"Add accessories" and select the "Scan QR code" option. Scan the QR code on the product and give it a
(location) name. Finally, tap the blue "V" to set up the transmitter.
3. Important information
A door/window sensor is used to control access to a room. A door/window sensor consists of 2 parts, the
narrow part the magnet (1) and the transmitter (2). When the distance between magnet and transmitter
exceeds 1cm, the red LED (3) lights up as an indication.

- 3 -
4. Battery
To replace the battery, carefully open the housing (5) with a suitable screwdriver. Slide the empty battery
out of the battery compartment (6) and insert a 3V CR2032 with the "+" facing upwards.
5. Technical data
Operating voltage
DC 3V
Battery
1 × CR2032 button cel (3V)
Operating current
≤40mA
Standby current
≤0,2uA
Frequency
433.92MHz
Range
Tot 150m without obstacles
Humidity
≤90%rh (non-condensing)
Operating temperature
-10°C ~ 50°C
Weight
35,5g (without battery) 40g (with battery)
Dimensions transmitter
80mm x 38.2mm x 13.3mm
Dimensions magnet
80mm x 14.8 x 12.9mm
6. DoC
- I, ELRO Europe, hereby declare that the radio equipment type AS90MA is in conformity with Directive
2014/53/EU. The full text of the EU Declaration of Conformity can be found at the following internet
address: www.elro.eu/compliance
- Frequency: 433.9MHz
- Maximum transmitting power: 1.422dBm
ELRO Europe | www.elro.eu
Postbus 9607 - Box E800
1006 GC Amsterdam - The Netherlands
7. Explanation of symbols
Recycling and disposal: The WEEE symbol means that this product and the batteries must be
disposed of separately from household waste. When this product has reached the end of its life,
take it to a designated collection point near you for safe disposal or recycling. Protect the
environment and human health, use natural resources responsibly!
Read the manual before use and keep it for future use and maintenance
Warranty visit www.elro.eu