ELRO AS90PP User manual

jK
AS90PP Manual EN Version 2
MANUAL
PET PROOF MOTION DETECTOR
ACCESSORY HOME+ALARM SYSTEM
Home is not a place, it’s a feeling
AS90PP

- 1 -
Inhoud
1. Introduction ................................................................................................- 2 -
2. Pairing with the app....................................................................................- 2 -
3. Switches A and B.........................................................................................- 2 -
4. Testing the motion detector.......................................................................- 3 -
5. Changing batteries......................................................................................- 3 -
6. Technische gegevens ..................................................................................- 4 -
7. DoC..............................................................................................................- 4 -
8. Explanation of symbols ...............................................................................- 4 -
`

- 2 -
1. Introduction
The motion detector accurately detects temperature differences due to movement within the detection
area (1). You use a motion detector to monitor a room. Pets up to 20kg are not detected. Movements
perpendicular to the detection area are most effective (2). Automatic temperature compensation ensures
stable operation. You get a push message when the battery voltage is too low.
2. Pairing with the app
The batteries must be activated, remove the plastic strip (3). The motion detector starts a self-test during
which the red LED (4) flashes for 30 seconds. You can use the TEST button on the back to check whether
the motion detector works when the alarm is switched on.
Open the app on your smartphone, tap "Add accessories" and select the "Scan QR code" option. Scan the
QR code on the product and give it a (location) name. Finally, tap the blue "V" to set up the transmitter.
3. Switches A and B
These switches are factory set as follows:
•Switch A (= ON)
Allows you to switch the motion detector on and off. Change the position of Switch A only if you do not
use the motion detector for a period. If this is a period of several months or even longer, we recommend
removing the batteries.
•Switch B (= 5 seconds).
The 5-second position is the test position (function test). The 5-minute position is the position for daily use.
Change the position of Switch B after testing the motion detector.

- 3 -
4. Testing the motion detector
Testing a motion detector means checking the room for dead spots, i.e. where the motion detector has no
perception. There are 2 executive options:
1. Via the app, set the base unit's siren to "silent". After each detected movement, the
window of the motion detector, a red LED lights up briefly and you get a push message in the app.
2. Holding the remote AS90RE in your hand. After each detected movement, the alarm goes off, turn off
the alarm (each time) with the remote control and you get a push message in the app.
Summary
•If you test the motion detector, then it should be in test mode (switch B = 5 seconds).
•If the motion detector seems to be working properly then the switch should be in normal mode (switch B =
5 minutes). Carefully open the housing (5) and set the switch to the "5 minutes mode".
Note:
If an intruder enters your home, then this person will be detected immediately resulting in an alarm
notification. After this, it takes 5 minutes before another detection takes place. This function prevents the
motion detector from detecting continuously, resulting in quick battery drain.
5. Changing batteries
Carefully open the housing (5) of the motion detector and replace the 2 "AA 1.5V" batteries for new ones.
Do not use rechargeable or used batteries.

- 4 -
6. Technische gegevens
Operating voltage
DC 3V
Batteries
2 x AA 1,5 V
Operating current
≤40mA
Standby current
≤0,2uA
Frequency
433.92MHz
Detection range
110°
Detection distance
9m
Immunity pets weight
20kg
Transmission range
Up to 150m (without obstacle)
Temperature
-10°C ~ 50°C
Humidity
90%rh (non-condensing)
Weight
67g (battery not included) 62g (bracket)
114g (battery included)
Dimensions
99 x 53 x 36mm
7. DoC
I, ELRO Europe, hereby declare that the radio equipment type AS90KEA complies with Directive
2014/53/EU. The full text of the EU declaration of conformity can be found at the following internet
address: www.elro.eu/compliance
- Frequency: 433.9MHz
- Maximum transmit power: -1.223dBm
ELRO Europe | www.elro.eu
Postbus 9607 - Box E800
1006 GC Amsterdam - Netherlands
8. Explanation of symbols
Recycling and disposal: The WEEE symbol means that this product and batteries should be
disposed of separately from household waste. When this product has reached the end of its
service life, take it to a designated collection point near you for safe disposal or recycling. Protect
the environment and human health, use natural resources responsibly!
Read the manual before use and keep it for future use and maintenance.
Warranty visit www.elro.eu