Emerson NR303TTC User manual

COMPLETE STEREO SYSTEM
with AM/FM STEREO RADIO,
CD and CASSETTE PLAYER,
and FULL SIZE STEREO PHONOGRAPH
OWNER S MANUAL
,
Visit our web site at: www.emersonelectronics.ca
NR303TTC

1
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCETO RAIN OR MOISTURE.
The lightning flash with arrow-
head symbol, within an equi-
lateral triangle is intended to
alert the user to the presence
within the product s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
,
WARNING : TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK), NO USER
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
SERVICEABLE PARTS INSIDE
The exclamation point within
an equilateral triangle is in-
tended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompany-
ing the appliance.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not usethis apparatus nearwater.
Clean only withdry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer s
instructions.
,
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) thatproduce heat.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a thirdgrounding prong. The wide bladeor the third prong is provided for your safety.
If the provided plug does not fit into you outlet, consult an electrician for replacement of
the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, andpoint where theyexit from theapparatus.
Only use attachments/ accessories specifiedby the manufacturer.
Unplug this apparatusduring lightning stormsor when unusedfor long periodsof time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has beendamaged in anyway, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rainor moisture, doesnot operate normally, or hasbeen dropped.
This appliance shall not be exposed to dripping or splashing water and no object filled
with liquids suchas vases shallbe placed onthe apparatus.
Do not overloadwall outlet. Useonly power sourceas indicated.
Use replacement partsas specified bythe manufacturer.
The product maybe mounted toa wall onlyif recommended bythe manufacturer.
Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
16.)
17.)
18.)
CAUTION

2
Thank you............ for purchasing this Emerson Heritage Series complete
home stereo system. Inside this beautiful real wood veneer cabinet you
will find a state of the art audio system that includes an AM/FM Stereo
Radio, a Compact Disc player, and a wide-range dynamic speakers. This
system has been designed to provide you with many years of enjoyment
and trouble-free operation with an absolute minimum of care and
maintenance.
Please read all of the instructions in this manual to make sure you are
getting the maximum benefit out of the features included in this system.
And please save this manual for future reference. It includes your
warranty and important service information.
Once again, thank you for purchasing this Emerson Heritage Series
Complete Stereo System.
The serial number of your system is located on the back panel. Please
take a moment now to locate the serial number and write thenumber in the
space provided below. You may be asked to provided this number when
calling for product service.
Model Number: NR303TTC
Serial Number:
Every component in this system was in perfect working order when it left
our factory. If you experience any problems with the set up or operation of
this system, PLEASE DO NOT RETURN IT TO THE RETAIL STORE.
Please call the SYNNEX Canada Limited Customer Service Hotline, toll-
free, at 1-800-663-5954. One of our representatives will attempt to resolve
the problem for you. If the problem cannot be resolved by phone you will
be instructed on how to proceed.

3
IMPORTANT NOTES
Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances such as
electric heaters, on top of other stereo
equipment that radiates too much heat,
places lacking ventilation or dusty areas,
places subject to constant vibration and/
or humid or moist areas.
Do not attempt to clean this unit with
chemical solvents as this might damage
the finish. Use a clean dry cloth.
Operate controls and switches as
described in the manual.
Before turning On the power, make
certain that power cord is properly
installed.
,
,
Store your Cds, cassettes in a cool
area to avoid damage from heat.
When moving the set, be sure to first
disconnect the power cord.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
APPAREILA LASER DECLASSE 1
PRODUCTO LASER DE CLASE1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN ANDINTERLOCKS
DEFEATED.
AVOID EXPOSURETO BEAM
This product contains a low power Laser Device.
FCC INIFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may causes harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that
may cause undesired operation.
(1)
(2)

IMPORTANT NOTES
Since digital circuitry may cause interference to other radio or television
tuners nearby, switch this unit off when not in use or move it away from the
affected radio/television tuner.
NOTE: This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the Radio Interference
Regulations of Industry Canada. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
operation (which can be determined by turning the equipment off), the user
is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
4
IMPORTANT

PREPARATION FOR USE
5
Carefully remove the unit from the display carton and remove all packing
material from the unit.
Unwind the AC power cord and extend it to its full length.
Unwind the FM Antenna wire and extend it to its full length.
Place the unit on a stable, level surface, convenient to an AC outlet, out of
direct sunlight, and away from sources of excess heat, dust, moisture, humidity,
or strong magnetic fields.
Connect the plug to your AC outlet.
UNPACKING AND SET UP
TRANSIT SCREW
Raise the lid to expose the phonograph. The phonograph has been secured
for shipment with a transit screw. Use a coin or screwdriver to turn the transit
screw clockwise. This will allow the turntable to float .
,,
,,

6
Remove the opaque white plastic stylus cover from the phonograph stylus by
sliding it in the direction of the arrow.
STYLUS COVER
Discard the stylus cover.
TONE ARM LOCK LEVER
Remove the twist-tie that was used to secure the tone arm during shipment.
Release the tone arm lock lever.
Connect the plug to your AC outlet.

7
POWER SOURCE
This system is designed to operate on normal 120V 60 Hz AC only. Attempting
to operate from any other power source may cause damage to the system, and
such damage is not covered by your warranty.
NOTE:
You will note that this system is equipped with a polarized AC power plug
having one blade wider than the other. This is a safety feature. If this plug
does not fit into your existing AC outlet, do not try to defeat this safety feature
by filing the wide blade to make it fit into your outlet. If this plug will not fit into
your outlet, you probably have an outdated non-polarized AC outlet. You
should have you outlet changed by a qualified licensed electrician.
AC Outlet
AC Plug
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber feet to prevent the product from
moving when you operate the controls. These feet are made from non-
migrating rubber material specially formulated to avoid leaving any marks or
stains on your furniture. However certain types of oil based furniture polishes,
wood preservatives, or cleaning sprays may cause the rubber feet to soften,
and leave marks or a rubber residue on the furniture. To prevent any damage to
your furniture we strongly recommend that you purchase small self-adhesive felt
pads, available at hardware stores and home improvement centres everywhere,
and apply these pads to the bottom of the rubber feet before you place the
product on fine wooden furniture.
,
,
,
,
,
,
,
,
IMPORTANT: Raising And Lowering The Lid
To open the lid, raise it as far as it will go until the lid support bracket locks in
the open position.
To close the lid, lift it upward slightly until the lid support bracket unlocks , and
then gently lower the lid.
,
,
,
,
TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID
CLOSED. ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT
BRACKET.

LOCATION OF CONTROLS AND INDICATORS
8
FRONT PANEL
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1
2
3
4
5
6
7
1.) Speakers.
2.) AM Dial Scale.
3.) Tuning Control.
4.) FM Dial Scale.
5.) Turntable.
6.) Phonograph Lid Support Bracket.
7.) Phonograph Lid.
8.) Cassette Player Slot.
9.) Cassette EJ/FF Button.
10.) OFF-VOLUME Control.
(Eject/Fast Forward)
11.) CD OPEN/CLOSE Button.
12.) EARPHONE (Headphone) Jack.
13.) CD STOP Button.
14.) CD F. F (Fast Forward) Button.
15.) CD F. R (Fast Reverse) Button.
16.) CD PLAY/PAUSE Button.
17.) POWER On Indicator.
18.) CD Drawer.
19.) CD Track Number Display.
20.) FM ST. Indicator.
21.) AM/FM/TAPE/CD/PHONO
Function Selector.

9
BACK PANEL
22.) AC Power Cord.
23.) FM Lead Wire Antenna.
PHONOGRAPH
22
23
1
2 3
4
5
6
7
1.) Turntable.
2.) 45 rpm Adapter.
3.) Transit Screw.
4.) Cue Lever.
5.) Speed Selector (33/45/78 rpm).
6.) Tone Arm Lock.
7.) Tone Arm with Stylus.

10
OPERATING INSTRUCTIONS
Listening To The Radio
To turn the system on , rotate the OFF-VOLUME control clockwise
until a click is heard, and set the Volume to a low level. The POWER
indicator lights up.
1.)
,
,
,
,
Rotate the TUNING control to tune the desired radio station. If you tune to
an FM stereo station, the FM ST. Indicator will light and reception will be in
stereo. If you tune to a weaker FM station, the reception will automatically
switch to mono.
3.)
Adjust the OFF-VOLUME control as desired.
4.)
Antenna Information
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try
repositioning the cabinet slightly until the internal antenna is picking up the
strongest signal.
The FM wire antenna is located on the back cabinet. If necessary adjust the
position and direction of this antenna until you find the position that provides the
best reception.
Set the Function selector (AM/FM/TAPE/CD/PHONO) to the AM or FM band
as desired . The dial scale light comes on .
2.)
,
,
When you are finished listening turn the OFF-VOLUME control counter
clockwise until a click is heard. The POWER indicator and the tuning dial
light go off .
5.)
,
,
,
,

11
PLAYING COMPACT DISCS
Turn the OFF-VOLUME control
clockwise until a click is heard, and
set the volume to a low level.
,
,
1.) 12
3
8
6
4
Set the Function selector
(AM/FM//TAPE/CD/PHONO) to the
CD position. The CD track number
display comes On .
,
,
2.)
Press the CD OPEN/CLOSE button to open the CD drawer.
3.)
Place your disc in the drawer with the printed label side facing up.
4.)
Press the CD OPEN/CLOSE button once more to close
the drawer. The disc will spin for a few seconds while
the player reads the disc, then the disc stops and the
display shows the total number of tracks on the disc.
5.)
Press the CD OPEN/CLOSE button again to begin
playback on track number one. The Play Indicator lights.
6.)
Adjust the OFF-VOLUME control to the desired level.
7.)
Playback will continue until the end of the disc. When the disc ends, the
display shows the total number of tracks on the disc again. You may also
stop playback at any time by pressing the CD STOP button.
8.)
Pause Control
To pause momentarily during playback press the CD
PLAY/PAUSE button again. Playback stops but the disc
continues to spin and the display flashes. Press the CD
PLAY/PAUSE button once more to cancel Pause and
resume playback. The display stops flashing.

12
Skipping Tracks And High Speed Music Search
During CD Playback, repeatedly press the F. F (Forward Forward) or F.R (Fast
Reverse) buttons to skip to higher or lower number tracks. When the desired
track number appears on the display release the buttons and playback will
begin on the desired track.
To rapidly search forward or back within a track to locate a specific musical
passage, depress and hold either the F. F (Forward Forward) or F.R (Fast
Reverse) buttons. The player will move forward or backward at high speed as
long as the buttons are depressed. When you hear the desired passage release
the buttons. Normal playback will resume at that point.
F.R F. F

13
PLAYING CASSETTE TAPES
Note: Before inserting a tape in the player be sure that there is no excess slack
in the cassette that could become jammed in the mechanism.
Refer to the CARE AND MAINTENANCE section for instructions on removing
excess slack from the cassette.
Rotate the OFF-VOLUME control clockwise until a click is heard and set
the Volume to a low level. The POWER indicator comes on .
1.) ,
,
,
,
Set the Function selector (AM/FM/TAPE/CD/PHONO) to the TAPE position.
2.)
Insert your cassette into the slot located on right side cabinet, as shown in
the illustration, with the side you wish to play facing up and the open end
on the right side.
3.) ,
,
Cassette Tape
Open End
Cassette playback begins as soon as the tape is inserted. Adjust the OFF-
VOLUME control to the desired level.
4.)
To advance the tape rapidly, depress the EJ/FF (Eject/Fast
Forward) button approximately half way. The tape will move
forward rapidly as long as the button is depressed. Normal
playback will resume when the button is released.
5.)
When the tape ends, the player stops automatically. Depress the
EJ/FF (Eject/Fast Forward) button completely to remove the
cassette from the player. You may press the EJ/FF (Eject/Fast
Forward) button to stop playback and remove the cassette at any
time.
6.)
To turn the system off , rotate the OFF-VOLUME control counter
clockwise until a click is heard. The POWER indicator goes off .
7.) ,
,
,
,
,
,

14
PLAYING RECORDS
This system includes a full-size, 3-speed, belt-drive turntable. You can play 33,
45, and 78 rpm records.
Turn the OFF-VOLUME control clockwise until a click is heard, and set
the Volume to a low level.
1.) ,
,
Set the Function (AM/FM/TAPE/CD/PHONO) selector to the PHONO
position.
2.)
Make sure that you have removed the stylus cover from the stylus and
have released the Tone Arm Lock that secured the tone arm to the tone
arm rest.
3.)
Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78
rpm. If you are playing 45 rpm singles , place the 45 rpm adapter on the
centre spindle.
4.) ,
,
Place your record on the centre spindle.
5.)
Raise the Cue lever to lift the tone arm off its rest. Move the tone arm to the
edge of the record. The turntable starts automatically. Use the Cue lever to
gently lower the tone arm onto the record.
6.)
Adjust the OFF-VOLUME control to the desired level.
7.)
When the tone arm reaches the end of the record it automatically returns to
the tone arm rest and the record player stops.
8.)
To turn the system off , rotate the OFF-VOLUME control counter
clockwise until a click is heard. The POWER indicator goes off .
9.) ,
,
,
,
,
,
NOTE: Do not turn or stop the turntable manually. Moving or jarring the
Turntable without securing the Tone Arm clamp could result in damage to the
Tone Arm.

IMPORTANT!!
TO PROTECT THE TURNTABLE FROM DAMAGE DURING
TRANSPORTATION, A SILVER TRANSIT SCREW IS LOCATED AT THE
UPPER RIGHT OF THE TURNTABLE PLATFORM.
BEFORE PLAYING, PLEASE USE A
SCREWDRIVER TO TURN THE TRANSIT SCREW
IN CLOCKWISE DIRECTION (SCREW GOING
DOWN) COMPLETELY TO UNLOCK THE
TURNTABLE.
TO CLOCK THE TURNTABLE AGAIN FOR
TRANSPORTATION, PLEASE TURN THE SCREW
IN COUNTER-CLOCKWISE DIRECTION.
USING STEREO HEADPHONES (NOT INCLUDED)
Connect a set of stereo headphones with a 3.5mm mini-plug to the EARPHONE
jack on the front panel. Before putting on the headphones always set the OFF-
VOLUME control to a low level. Then put the headphones on and gradually
increase the Volume to a comfortable listening level. The built-in speakers
automatically shut off when headphones are connected to the EARPHONE jack.
EARPHONE jack
15

CARE AND MAINTENANCE
CASSETTE CARE
Tape jamming - Leading to uneven speed in playback, and
1.)
Two common causes of trouble experienced when using cassettes are:
Tape tangling - Where the tape wraps itself around vital parts of the
mechanism.
2.)
To reduce the likelihood of these problems occurring, the following precautions
should be observed:
Check that there are no loose layers of tape
visible through the cassette centre window (see
Fig. 1). Take up any loose layers, using a pencil or
hexagonal barrelled ballpoint pen, before inserting
the cassette into the machine (see Fig.2).
If the cassette feels tight while performing
operation shown (see Fig.2), the tape may be
jamming due to ridges formed in the winding of
the tape (visible through the centre window).
These may be removed, in most cases, by fast
winding of the cassette from one end to the other
and back again.
Use only well-known brands of tape. Avoid use of C-120 cassettes.
,,
,,
,,
,,
Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not
touch the tape surfaces.
Fig. 1
Fig. 2
16

17
CARE AND MAINTENANCE
COMPACT DISC CARE
To remove a disc from its storage case, press down on the centre of the case
and lift the disc out, holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the discs recorded
surface with a soft cloth. Unlike conventional records, compact discs have no
grooves to collect dust and microscopic debris, so gently wiping with a soft
cloth should remove most particles. Wipe in a straight line from the inside to
the outside of the disc. Small dust particles and light stains will have
absolutely no effect on reproduction quality.
Clean the disc periodically with a soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to clean the disc. If necessary, use a CD
cleaning kit.
Never write on or affix labels to the surface of compact discs.
CARE OF THE CABINETS
You should care for the cabinet as you would care for any piece of the furniture.
When the cabinet becomes dusty wipe it with a soft, non-abrasive dust cloth. If
the cabinet becomes smudged with fingerprints you may use any good quality
commercial dusting and polishing spray cleaner, however avoid spraying the
plastic or metal parts of this system. We recommend that you spray the cleaner
on your dust cloth, not directly on the cabinet, to avoid getting any of the spray
on the plastic or metal parts.

EMERSON WARRANTY
Consumer Electronics, Home Appliances and Home Office Products
Thank you for choosing EMERSON!
SYNNEX Canada Limited gives the following express warranty to the
original consumer purchaser or gift recipient for this EMERSON product,
when shipped in its original container and sold or distributed in Canada by
SYNNEX Canada Limited or by an Authorized EMERSON Dealer.
SYNNEX Canada Limited warrants that this product is free, under normal
use and maintenance, from any defects in material and workmanship. If
any such defects should be found in this product within the applicable
warranty period, SYNNEX Canada Limited shall, at its option, repair or
replace the product as specified herein. Replacement parts furnished in
connection with this warranty shall be warranted for a period equal to the
unexpired portion of the original equipment warranty.
18
This warranty shall not apply to:
Any defects caused or repairs required as a result of abusive
operation, negligence, accident, improper installation or
inappropriate use as outlined in the owner's manual.
a.
Any EMERSON product tampered with, modified, adjusted or
repaired by any party other than SYNNEX Canada Limited or
EMERSON's Authorized Service Centres
b.
,
Damage caused or repairs required as a result of the use with
items not specified or approved by SYNNEX Canada Limited,
including but not limited to head cleaning tapes and chemical
cleaning agents.
c.
Any replacement of accessories, glassware, consumable or
peripheral items required through normal use of the product
including but not limited to earphones, remote controls, AC
adapters, batteries, temperature probe, stylus, trays, filters,
cables, paper, cabinet, cabinet parts, knobs, buttons, baskets,
stands, shelves, cookware and cooking utensils.
d.
Any cosmetic damage to the surface or exterior that has been
defaced or caused by normal wear and tear.
e.
Any damage caused by external or environmental conditions,
including but not limited to transmission line/power line voltage
or liquid spillage.
f.

To obtain the name and address of the nearest Authorized EMERSON
Service Centre or for more information on this warranty
-visit www.emersonelectronics.ca
-mail your inquiry to
SYNNEX Canada Limited
EMERSON Customer Service
200 Ronson Drive, Toronto, ON M9W 5Z9; or
CARRY-IN PARTS & LABOUR WARRANTY PERIODS:
Audio Products: 1 Year (Remote Control, if applicable 90 Days)
Home Appliances:1 Year
Microwave Magnetron parts only additional 3 Years
0
Refrigerator / Freezer Compressor parts only, additional 4 years
0
Home Office Products: 1 Year
Any product received without appropriate model, serial number
and CSA/cUL /cULus /cETL /cETLus markings.
g.
Any products used for rental or commercial purposes.
h.
Any installation, setup and/or programming charges.
i.
Should this EMERSON product fail to operate during the warranty period,
warranty service may be obtained upon delivery of the EMERSON product
together with proof of purchase and a copy of this LIMITED WARRANTY
statement to an Authorized EMERSON Service Centre. This warranty
constitutes the entire express warranty granted by SYNNEX Canada
Limited and no other dealer, service centre or their agent or employee is
authorized to extend, enlarge or transfer this warranty on behalf of
SYNNEX Canada Limited. To the extent the law permits, SYNNEX Canada
Limited disclaims any and all liability for direct or indirect damages or
losses or for any incidental, special or consequential damages or loss of
profits resulting from a defect in material or workmanship relating to the
product, including damages for the loss of time or use of this EMERSON
product or the loss of information. The purchaser will be responsible for
any removal, reinstallation, transportation and insurance costs incurred.
Correction of defects, in the manner and period of time described herein,
constitute complete fulfillment of all obligations and responsibilities of
SYNNEX Canada Limited to the purchaser with respect to the product and
shall constitute full satisfaction of all claims, whether based on contract,
negligence, strict liability or otherwise.
19
- call toll free 1-800-663-5954, Monday to Friday 9:00am 5:00pm
Eastern Standard Time.