Emtek IN4 User manual

Installation Guide - Keyed Pocket Door Mortise Lock, Classic Trim
Install Lock Body Install Drive Bar Cylinder
Mount Outside Plate
Mount Inside Plate
Install Trim Plate
Thread Key Cylinder
Install Door Jamb
Tighten Drive Bar Cylinder
See template for door prep
specifications
Inside
Note: Notch on cylinder must be
in the 9 o’ clock position when
fully screwed into lock body.
Install Key Cylinder by
threading it clockwise
onto lock body plate
Key Cylinder notch
must be at the 3 o’clock
position when fully
screwed in lock body. Tighten locking screw to engage
notch on cylinder
See template for door jamb
prep specifications
Drill two 7/64”
pilot holes
7
5
8
6
4
3
2
1
IN4-POCKETMORTISEKYD REV. D

Installation Guide - Keyed Pocket Door Mortise Lock, Modern Trim
Install Lock Body Install Drive Bar Cylinder
Mount Outside Plate and Thread Key Cylinder
Mount Inside Plate
Install Trim Plate Install Door Jamb
See template for door prep
specifications
Inside
Note: Notch on cylinder must be
in the 9 o’ clock position when
fully screwed into lock body.
See template for door jamb
prep specifications
Inside
Outside
Drill two 7/64”
pilot holes
6
5
7
4
3
2
1
Install Key Cylinder by threading it
clockwise onto lock body plate
Key Cylinder notch must be at the 3
o’clock position when fully screwed
in lock body.
Tighten Drive Bar Cylinder
Tighten locking screw to engage
notch on cylinder