Endress+Hauser Micropilot NMR81 User manual

Products Solutions Services
Description of Device Parameters
Micropilot NMR81
Tank Gauging
GP01068G/00/EN/02.17
71320408

Micropilot NMR81 Table of contents
Endress+Hauser 3
Table of contents
1 About this document ................ 4
1.1 Document function ..................... 4
1.2 Symbols .............................. 4
2 Overview of the operating menu ..... 6
3 The "Expert" menu ................ 25
3.1 "System" submenu ..................... 28
3.2 "Sensor" submenu ...................... 52
3.3 "Input/output" submenu ................. 80
3.4 "Communication" submenu .............. 132
3.5 "Application" submenu ................. 172
3.6 "Tank values" submenu ................. 227
3.7 "Diagnostics" submenu ................. 239
Index ................................. 263

About this document Micropilot NMR81
4 Endress+Hauser
1 About this document
1.1 Document function
The document is part of the Operating Instructions and serves as a reference for
parameters, providing a detailed explanation of each individual parameter of the operating
menu.
1.2 Symbols
1.2.1 Safety symbols
Symbol Meaning
DANGER
DANGER!
This symbol alerts you to a dangerous situation. Failure to avoid this situation will
result in serious or fatal injury.
WARNING
WARNING!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in serious or fatal injury.
CAUTION
CAUTION!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in minor or medium injury.
NOTICE
NOTE!
This symbol contains information on procedures and other facts which do not result in
personal injury.
1.2.2 Electrical symbols
Symbol Meaning
Direct current
Alternating current
Direct current and alternating current
Ground connection
A grounded terminal which, as far as the operator is concerned, is grounded via a
grounding system.
Protective ground connection
A terminal which must be connected to ground prior to establishing any other
connections.
Equipotential connection
A connection that has to be connected to the plant grounding system: This may be a
potential equalization line or a star grounding system depending on national or
company codes of practice.
1.2.3 Tool symbols
Symbol Meaning
A0013442
Torx screwdriver
A0011220
Flat blade screwdriver

Micropilot NMR81 About this document
Endress+Hauser 5
Symbol Meaning
A0011219
Cross-head screwdriver
A0011221
Allen key
A0011222
Hexagon wrench
1.2.4 Symbols for certain types of information
Symbol Meaning
Tip
Indicates additional information.
Reference to documentation
A
Reference to page
Reference to graphic
Operation via local display
Operation via operating tool
Write-protected parameter
1.2.5 Symbols in graphics
Symbol Meaning
1, 2, 3 ... Item numbers
A, B, C, ... Views
A-A, B-B, C-C, ... Sections
1.2.6 Symbols at the device
Symbol Meaning
Safety instructions
Observe the safety instructions contained in the associated Operating Instructions.
Temperature resistance of the connection cables
Specifies the minimum value of the temperature resistance of the connection cables.

Overview of the operating menu Micropilot NMR81
6 Endress+Hauser
2 Overview of the operating menu
• The following table lists all parameters the "Expert" menu may contain. The page
number refers to where a description of the parameter can be found.
• Depending on the device version and parametrization some parameters will not be
available in a given situation. For details on the conditions refer to the "Prerequisite"
category in the description of the respective parameter.
• The representation essentially corresponds to the menu seen when using an
operating tool (e.g. FieldCare). On the local display there may be minor differences
in the menu structure. Details are mentioned in the description of the respective
submenu.
Navigation  Expert
Expert
Direct access (0106) →  25
Locking status (0004) →  26
Access stat.disp (0091) →  26
Access stat.tool (0005) →  26
Ent. access code (0003) →  26
‣System →  28
‣Display →  29
Language (0104) →  29
Format display (0098) →  30
Value 1 to 4 display (0107–1 to 4) →  30
Decimal places 1 to 4 (0095–1 to 4) →  31
Separator (0101) →  32
Number format (0099) →  32
Header (0097) →  33
Header text (0112) →  33
Display interval (0096) →  33
Display damping (0094) →  34

Micropilot NMR81 Overview of the operating menu
Endress+Hauser 7
Backlight (0111) →  34
Contrast display (0105) →  34
‣System units →  36
Units preset (0605) →  36
Distance unit (0551) →  37
Pressure unit (0564) →  37
Temperature unit (0557) →  37
Density unit (0555) →  38
Decimal length (0573) →  38
Decimal pressure (0608) →  39
Decimal temp. (0614) →  39
Decimal density (0609) →  39
‣Date / time →  43
Date/time (0790) →  44
Set date (0792) →  44
Year (0782) →  45
Month (0787) →  45
Day (0788) →  45
Hour (0789) →  46
Minute (0791) →  46
‣Administration →  49
Def. access code (0093) →  50
Activate SW opt. (0029) →  50
Device reset (0000) →  50

Overview of the operating menu Micropilot NMR81
8 Endress+Hauser
‣Sensor →  52
‣Information →  53
Distance (12401) →  54
Sensor temp. (12499) →  54
Signal quality (12477) →  54
Abs. echo ampl. (12457) →  54
Relat.echo ampl. (12468) →  55
Tank bottom ampl (12467) →  55
Found echoes (12492) →  55
Used calculation (12488) →  55
‣Filter options →  57
Integration time (12489) →  58
Dead time (12521) →  58
‣Sensor diag. →  59
Start self check (12496) →  59
Result selfcheck (12497) →  59
‣Safety sett. →  61
Output echo lost (12523) →  62
Delay echo lost (12456) →  62
‣Mapping →  69
Distance (12401) →  54
Confirm distance (12462) →  71
Present mapping (12487) →  72
Map. end point (12459) →  72
Record map (12448) →  73

Micropilot NMR81 Overview of the operating menu
Endress+Hauser 9
End of mapping (12461) →  73
End map. ampl. (12478) →  74
‣Echo tracking →  76
Evaluation mode (12411) →  77
History reset (12449) →  77
‣Tank bottom eval →  79
Max.TB off dist. (12463) →  79
‣Input/output →  80
‣HART devices →  81
Number devices (13051) →  81
‣HART Device(s) →  82
Device name (14722) →  83
Polling address (14712) →  83
Device tag (14713) →  83
Operating mode (14745) →  83
Comm. status (14710) →  84
#blank#(HART PV - description
dependent on device) (14715)
→  84
#blank#(HART SV - description
dependent on device) (14705)
→  84
#blank#(HART TV - description
dependent on device) (14706)
→  84
#blank#(HART QV - description
dependent on device) (14716)
→  85
HARTDEV PV mA (14708) →  85
HARTDEV PV % (14709) →  85
Output pressure (14719) →  86

Overview of the operating menu Micropilot NMR81
10 Endress+Hauser
Output density (14720) →  86
Output temp. (14721) →  86
Output vapor tmp (14726) →  87
Output level (14718) →  87
‣HART device info →  89
‣Element values →  95
‣Diagnostics →  96
‣NMT dev. config →  98
‣Forget device →  104
Forget device →  104
‣Analog IP →  105
Operating mode (14014) →  106
RTD type (14021) →  106
Ohms offset (14026) →  107
RTD connect type (14022) →  107
Process value (14003) →  108
Process variable (14016) →  108
0 % value (14001) →  108
100 % value (14013) →  109
Input value [%] (14002) →  109
Input value (14015) →  109
Temp. offset (14025) →  110
Min. probe temp (14010) →  110
Max. probe temp (14011) →  110
Probe position (14009) →  111

Micropilot NMR81 Overview of the operating menu
Endress+Hauser 11
Cal type AIP (14018) →  111
Act. calibration (14012) →  112
Damping factor (14004) →  112
Gauge current (14027) →  112
‣Analog I/O →  113
Operating mode (13958) →  114
Current span (13987) →  115
Fixed current (13989) →  116
Analog source (13974) →  116
Failure mode (13988) →  117
Error value (13972) →  118
Output out range (13971) →  118
Error on event (13967) →  118
Input value (13979) →  119
0 % value (13954) →  119
100 % value (13968) →  119
Input value % (13955) →  120
Output value (13969) →  120
Readback value (13957) →  120
Feedback thresh. (13956) →  121
Process variable (13964) →  121
AI 0% value (13977) →  121
AI 100% value (13965) →  122
Error event type (13953) →  122
Process value (13963) →  122

Overview of the operating menu Micropilot NMR81
12 Endress+Hauser
Input val. in mA (13970) →  123
Input value [%] (13978) →  123
Damping factor (13951) →  123
Calibration (13966) →  123
Act. calibration (13981) →  124
Used for SIL/WHG (13980) →  124
SIL/WHG chain (13952) →  125
‣Digital Xx-x →  126
Operating mode (13911) →  127
Digital source (13907) →  127
Input value (13901) →  128
Contact type (13912) →  128
Output sim (13909) →  129
Output value (13902) →  130
Readback value (13903) →  130
Error on event (13916) →  130
Damping factor (13904) →  131
Used for SIL/WHG (13910) →  131
‣Communication →  133
‣"Modbus Xx-x" / "V1 Xx-x"
submenu
Commu I/F protoc (13201) →  133
Modbus value 1 to 4 (13206–1 to 4) →  134
Modbus discr. 1 to 4 (13240–1 to 4) →  134

Micropilot NMR81 Overview of the operating menu
Endress+Hauser 13
‣"Configuration" submenu
(Modbus)
Baudrate (13203) →  135
Parity (13204) →  136
Modbus address (13205) →  136
Float swap mode (13232) →  136
Invalid data (13243) →  137
Word type (13208) →  137
CRC seed (13248) →  137
Old TSM mode (13213) →  138
Bus termination (13249) →  138
‣Integer convers →  139
Level 0% (13214) →  139
Level 100% (13250) →  140
Temperature 0% (13215) →  140
Temperature 100% (13216) →  140
Pressure 0% (13217) →  141
Pressure 100% (13251) →  141
Density 0% (13252) →  141
Density 100% (13218) →  142
User 0% (13221) →  142
User 100% (13222) →  142
Percent 0% (13202) →  143
Percent 100% (13234) →  143

Overview of the operating menu Micropilot NMR81
14 Endress+Hauser
‣UserVal source →  144
UserVal 1 to 8 source (13209–1 to 8) →  144
‣GP values →  145
GP 1 value 0% (13223) →  145
GP 1 value 100% (13224) →  145
GP 2 value 0% (13257) →  146
GP 2 value 100% (13258) →  146
GP 3 value 0% (13259) →  146
GP 3 value 100% (13226) →  147
GP 4 value 0% (13225) →  147
GP 4 value 100% (13227) →  147
‣Discreteselect →  148
Discrete 1 to 8select (13260–1 to 8) →  148
‣"Configuration" submenu (V1)
Protocol variant (13269) →  149
V1 address(V1 / MDP) (13235) →  149
V1 address(BBB / MIC+232) (13236) →  150
Level mapping (13268) →  150
Line impedance (13266) →  151
Comp. mode (13281) →  151
‣V1 input select. →  152
UserVal 1 to 8 source (13209–1 to 8) →  152
Alarm1 input src (13270) →  153
Alarm2 input src (13271) →  153
Alarm3 in-source (13283) →  154

Micropilot NMR81 Overview of the operating menu
Endress+Hauser 15
Alarm4 in-source (13284) →  154
SP1 value select (13274) →  155
SP2 value select (13275) →  155
SP3 value select (13276) →  156
SP4 value select (13277) →  156
Value % select (13282) →  156
‣HART output →  158
‣Configuration →  159
Polling address (0219) →  159
No. of preambles (0217) →  160
PV source (11634) →  160
Assign PV (0234) →  160
0 % value (11632) →  161
100 % value (11633) →  162
PV mA selector (11631) →  162
Primary var (PV) (0201) →  162
Percent of range (0274) →  163
Assign SV (0235) →  163
Second.var(SV) (0226) →  164
Assign TV (0236) →  164
Tertiary var(TV) (0228) →  165
Assign QV (0237) →  165
Quaterna.var(QV) (0203) →  166
‣Information →  167
HART short tag (0220) →  167

Overview of the operating menu Micropilot NMR81
16 Endress+Hauser
Device tag (0215) →  168
Device revision (0204) →  168
Device ID (0221) →  168
Device type (0209) →  168
Manufacturer ID (0259) →  169
HART revision (0205) →  169
HART descriptor (0212) →  169
HART message (0216) →  170
Hardware rev. (0206) →  170
Software rev. (0224) →  170
HART date code (0202) →  170
‣Application →  172
‣Tank config →  172
‣Level →  173
Empty (14602) →  173
Tank ref height (14603) →  174
Tank level (14655) →  174
Set level (14604) →  174
Upper I/F level (15003) →  174
Lower I/F level (15004) →  175
Water level src (14971) →  175
Water level (14970) →  175
Man. water level (14959) →  176
Blocking dist. (12424) →  176

Micropilot NMR81 Overview of the operating menu
Endress+Hauser 17
‣Temperature →  177
Liq temp source (14972) →  177
Man. liquid temp (15015) →  178
Liquid temp. (14978) →  178
Air temp. source (14993) →  178
Manual air temp. (14961) →  179
Air temp. (14986) →  179
Vapor temp src (14973) →  179
Man. vapor temp. (14960) →  180
Vapor temp. (14985) →  180
‣Density →  181
Density source (13454) →  181
Observed density (13452) →  182
Air density (14980) →  182
Vapor density (14981) →  182
UpDensity source (15006) →  182
Manual density (14998) →  183
Meas upper dens. (15001) →  184
Meas middle dens (14997) →  184
Meas lower dens. (15002) →  184
Water density (13757) →  184
‣Pressure →  185
P1 (bot) source (14994) →  186
P1 (bottom) (14983) →  186
P1 (bot) manual (14951) →  186

Overview of the operating menu Micropilot NMR81
18 Endress+Hauser
P1 position (14952) →  187
P1 offset (14953) →  187
P1 absolut/gauge (14954) →  187
P2 (mid) source (14995) →  188
P2 (middle) (14987) →  188
P2 (mid) manual (14955) →  188
P2 offset (14975) →  189
P1-2 distance (14974) →  189
P2 absolut/gauge (14976) →  189
P3 (top) source (14996) →  190
P3 (top) (14988) →  190
P3 (top) manual (14977) →  190
P3 position (14956) →  191
P3 offset (14957) →  191
P3 absolut/gauge (14958) →  191
Ambient pressure (14962) →  192
‣GP values →  193
GP 1 to 4 source (14989–1 to 4) →  193
GP 1 to 4 name (14963–1 to 4) →  194
GP Value 1 (14966) →  194
GP Value 2 (14967) →  194
GP Value 3 (14968) →  194
GP Value 4 (14969) →  195
‣Tank calculation →  196
Local gravity (14979) →  196

Micropilot NMR81 Overview of the operating menu
Endress+Hauser 19
‣HyTD →  199
HyTD corr. value (13603) →  199
HyTD mode (14652) →  199
Starting level (13601) →  199
Deform factor (13602) →  200
‣CTSh →  204
CTSh corr value (13651) →  204
CTSh mode (14651) →  205
Covered tank (13654) →  205
Stilling well (13653) →  205
Calibration temp (13652) →  206
Linear exp coeff (13655) →  206
‣HTMS →  209
HTMS mode (13751) →  209
Manual density (15009) →  210
Density value (13753) →  210
Min. level (13752) →  210
Min. pressure (13754) →  211
Safety distance (13756) →  211

Overview of the operating menu Micropilot NMR81
20 Endress+Hauser
Hysteresis (13755) →  211
Water density (13757) →  212
‣Dip-table →  216
Table settings (12515) →  216
Table mode (12516) →  216
‣Alarm →  218
‣Alarm →  218
Alarm mode (13864) →  219
Error value (13851) →  220
Alarm source (13866) →  221
Alarm value (13863) →  222
HH alarm value (13855) →  222
H alarm value (13854) →  222
L alarm value (13853) →  223
LL alarm value (13852) →  223
HH alarm (13857) →  223
H alarm (13856) →  224
HH+H alarm (13858) →  224
L alarm (13859) →  224
LL alarm (13868) →  224
LL+L alarm (13869) →  225
Any error (13867) →  225
Clear alarm (13861) →  225
Alarm hysteresis (13862) →  226
Damping factor (13860) →  226