EnGenius EAP350 User manual

1

Table of Contents
1Introduction....................................................................................................................................................................... 5
1.1 Key Features.......................................................................................................................................................................................................5
1.2 Package Contents ............................................................................................................................................................................................5
1.3 System Requirements.....................................................................................................................................................................................6
1.4 Package Contents ............................................................................................................................................................................................6
1.5 Applications .......................................................................................................................................................................................................6
1.6 Technical Specification ..................................................................................................................................................................................8
1.7 Physical Interface .............................................................................................................................................................................................9
2Before you Begin............................................................................................................................................................. 10
2.1 Considerations for Wireless Installation ............................................................................................................................................... 10
2.2 Computer Settings (in Windows XP/Windows 7/Windows 8)...................................................................................................... 11
2.3 Computer Settings in Apple Mac OS X................................................................................................................................................. 14
2.4 Hardware Installation................................................................................................................................................................................... 15
2.5 Mounting the EAP350 ................................................................................................................................................................................. 16
3Configuring Your Access Point ...................................................................................................................................... 17
3.1 Default Settings ............................................................................................................................................................................................. 17
3.2 Web Configuration....................................................................................................................................................................................... 17
4Building a Wireless Network ......................................................................................................................................... 19
4.1 Access Point Mode....................................................................................................................................................................................... 19
4.2 WDS AP Mode ............................................................................................................................................................................................... 19
4.3 WDS Bridge Mode........................................................................................................................................................................................ 19
4.4Repeater mode .............................................................................................................................................................................................. 20
5Status ................................................................................................................................................................................ 21
5.1 Save/Reload .................................................................................................................................................................................................... 21

5.2 Main................................................................................................................................................................................................................... 21
5.3 Wireless Client List........................................................................................................................................................................................ 22
5.4 Connection Status......................................................................................................................................................................................... 22
5.5 WDS Link List.................................................................................................................................................................................................. 23
5.6 System Log...................................................................................................................................................................................................... 23
6System .............................................................................................................................................................................. 24
6.1 Operation Mode............................................................................................................................................................................................ 24
6.2 IP Settings........................................................................................................................................................................................................ 24
6.3 Spanning Tree Setting................................................................................................................................................................................. 25
7Wireless ............................................................................................................................................................................ 26
7.1 Wireless Network.......................................................................................................................................................................................... 26
7.2 Wireless Security ........................................................................................................................................................................................... 27
7.3 Site Survey....................................................................................................................................................................................................... 29
7.4 Wireless MAC Filter ...................................................................................................................................................................................... 30
7.5 Wireless Advanced ....................................................................................................................................................................................... 32
7.6 WPS (Wi-Fi Protected Setup).................................................................................................................................................................... 33
7.7 WDS Link Settings......................................................................................................................................................................................... 33
8Management.................................................................................................................................................................... 35
8.1Administration................................................................................................................................................................................................ 35
8.2 Management VLAN...................................................................................................................................................................................... 35
8.3 SNMP................................................................................................................................................................................................................. 37
8.4 Backup/Restore.............................................................................................................................................................................................. 38
8.5 Firmware Upgrade........................................................................................................................................................................................ 39
8.6 Time Setting.................................................................................................................................................................................................... 39
8.7 Schedule........................................................................................................................................................................................................... 40
8.8 CLI Setting ....................................................................................................................................................................................................... 40
8.9 Log...................................................................................................................................................................................................................... 41

8.10 Diagnostics...................................................................................................................................................................................................... 41
8.11 Device Discovery ........................................................................................................................................................................................... 42
8.12 LED Control ..................................................................................................................................................................................................... 42
8.13 Logout............................................................................................................................................................................................................... 42
8.14 Reset .................................................................................................................................................................................................................. 43
Appendix A –FCC Interference Statement .......................................................................................................................... 44
Appendix B –Industry Canada Statement........................................................................................................................... 45
Appendix C –CE Interference Statement............................................................................................................................. 46

5
1Introduction
1.1 Key Features
High Transmit Power, enabling long range connectivity
Supports IEEE 802.11 b/g/n wireless standards with up
to 300Mbps data rate.
Monitor after deployment with EnGenius EZ
ControllerTM software. (Free Online download)
Supports both the included adapter or IEEE 802.3af
PoE (Power over Ethernet) –capable Switches or
Injectors
Multiple Application –Access Point / WDS / Repeater
The EAP350 is a high-powered, long-range 802.11b/g/n
Wireless Indoor Access Point with multiple operation
modes. It can be deployed in a number of different
businesses from a small office to large hotels and multi-
story office, hospital or university buildings.
The EAP350 can also be used in large homes to extend
the range of an existing network and help to eliminate
wireless dead zones caused by certain architectural
materials.
To protect data during wireless transmissions, the EAP350
supports industry-standard WPA/WPA2 encryption and
MAC address filtering to authorize only specific devices
to access the network.
1.2 Package Contents
The EAP350 package contains the following items
(Resellers and dealers require that all items must be in the

6
package to issue a refund):
EAP350
12V/1A 100V~240V Power Adapter
RJ-45 Ethernet Cable
CD with User Manual
Quick Installation Guide
Wall Mount Screw kit
1.3 System Requirements
The following are the Minimum System Requirements in
order configure the device:
Computer with an Ethernet interface or wireless
network capability.
Windows OS (XP, Vista, 7, 8), Mac OS X, or Linux-
based operating systems.
Web-Browsing Application (i.e.: Internet Explorer,
Firefox, Safari, or other similar browser application).
1.4 Package Contents
The EAP350 package contains the following items
EAP350 Access Point
Power Adapter
RJ-45 Ethernet Cable
Quick Installation Guide
Ceiling and Wall Mount Screw Kit
1.5 Applications
Wireless LAN (WLAN) products are easy to install and
highly efficient. The following list describes the benefits
of deploying a wireless access point:
a) Difficult-to-Wire Environments
There are many situations where wires cannot be
installed, deployed easily or cannot be hidden from
view. Many older buildings sites, or areas within a
building may make the installation of an Ethernet-
based LAN impossible, impractical or expensive.
b) Temporary Workgroups
A deployed wireless access point or several access
points, gives businesses the flexibility to create
temporary workgroups/networks in more open
areas within a building –auditoriums, amphitheater
classrooms, ballrooms, arenas, exhibition centers,
and temporary offices.
c) The Ability to Access Real-Time Information
Doctors/Nurses, Point-of-Sale Employees, and/or
Warehouse Workers can access real-time
information on their network via the access point
while dealing with patients, serving customers,
and/or processing information.
d) Frequently Changing Environments

7
Setting up an access point, like the EAP350, to
provide access to a company network or its Internet
connection is quick and easy which also makes it
ideal for establishing network access in temporary
venues like exhibits, special events, or show rooms.
e) Small Office and Home Office (SOHO) Networks
A wireless access point, like the EAP350, is ideal for
SOHO users who need a cost-effective way to
expand their existing network to provide more
access for more devices, easy and quick installation
of a small network.
f) Wireless Extensions to Existing Ethernet-based
Networks
Wireless access points, like the EAP350, enable
network administrators, installers and end-users to
extend the range and reach of an existing Ethernet-
based network.
g) Training/Educational Facilities
Training sites at corporations and universities deploy
wireless access points to provide connectivity their
networks and the Internet connection for their
employees and students.

8
1.6 Technical Specification
Standard
IEEE802.11 b/g/n
Physical Interface
1 x 10/100/1000 Gigabit Ethernet Port
1 x Reset Button
1 x Power Connector
LED Indicator
Power
WAN (Wireless Connection)
LAN
Power Requirement
DC 12V/1A Input
Operation Modes
Access Point
WDS
Repeater
Security
WEP (64/128/152bits)
WPA/WPA2(TKIP/AES)
Hidden SSID
MAC Filtering Up to 50 SSIDs
802.1X Authenticator (MD5/TLS/TTLS/PEAP)
QoS (Quality of Service)
WMM (Wireless Multimedia)
Physical/Environment Condition
Operating
-Temperature: 0℃to +50℃(-32°F to 104°F)
-Humidity: 0%~90%
Storage
-Temperature: -20℃~ +60℃(-4°F to 140°F)
-Humidity: 0%~90%

9
1.7 Physical Interface

10
2Before you Begin
This section will guide you through the installation
process. Placement of the EnGenius EAP350 is essential to
maximize the access point’s performance. Avoid placing
the EAP350 in an enclosed space such as a closet, cabinet,
or stairwell.
2.1 Considerations for Wireless
Installation
Generally, the exact operating distance of a wireless
device, like the EAP350, cannot be pre-determined due to
a number of unknown variables or obstacles in the
environment in which the device will be deployed. These
could be the number, thickness, and location of walls,
ceilings, elevator shafts, stairwells, or other objects that
the device's wireless signals must pass through. Here are
some key guidelines to allow the EAP350 to have optimal
wireless range.
Keep the number of walls and/or ceilings between the
EAP350 and other network devices to a minimum.
Each wall and/or ceiling can reduce the signal
strength, resulting in lower signal strength.
Building materials make a difference. A solid metal
door and/or aluminum studs may have a significant
negative effect on the signal strength of the EAP350.
Locate your wireless devices carefully so the signal can
pass through drywall and/or open doorways.
Materials such as glass, steel, metal, concrete, water
(example: fish tanks), mirrors, file cabinets and/or
brick can also diminish wireless signal strength.
Interference from other electrical devices and/or
appliances that generate RF noise can also diminish
the EAP350’s signal strength. The most common types
of devices are microwaves or cordless phones.

11
2.2 Computer Settings (in Windows
XP/Windows 7/Windows 8)
In order to use the EAP350, you must first configure the
TCP/IPv4 connection of your Windows OS computer
system.
Click Start button and open Control Panel in
Windows XP/Windows 7
Windows XP
Windows 7
Move your mouse to the lower right hot corner to
display the Charms Bar and select the Control Panel
in Windows 8
Windows 8

12
In Windows XP, click Network Connection
In Windows 7 and Windows 8, click View Network
Status and Tasks in the Network and Internet
section and then select Change adapter settings.
Right click on Local Area Connection and select
Properties.
Select Internet Protocol Version 4 (TCP/IPv4) and
then select Properties.

13
Select Use the following IP address and enter an IP
address that is different from the EAP350 and subnet
mask then click OK.
Note: Ensure that the IP address and subnet mask are on
the same subnet as the device.
For example: Device IP address: 192.168.1.1
PC IP address: 192.168.1.2 –192.168.1.255
PC subnet mask: 255.255.255.0

14
2.3 Computer Settings in Apple Mac
OS X
Go to System Preferences (can be opened in the
Applications folder or selecting it in the Apple Menu).
Select Network in the Internet & Network section.
Highlight Ethernet.
In Configure IPv4, select Manually.
Enter an IP address that is different from the EAP350
and subnet mask then press OK.
Note: Ensure that the IP address and subnet mask are on
the same subnet as the device.
For example: Device IP address: 192.168.1.1
PC IP address: 192.168.1.2 –192.168.1.255
PC subnet mask: 255.255.255.0
Click Apply when done.

15
2.4 Hardware Installation
1. Ensure that the computer in use has an available
Ethernet (RJ-45) Port. For more information, verify
with your computer’s user manual.
2. Connect one end of the Category 5e Ethernet cable
into the RJ-45 port of the EAP350 and the other end
to the RJ-45 port of the computer. Ensure that the
cable is securely connected to both the EAP350 and
the computer.
3. Connect the Power Adapter DC connector to the DC-
IN port of the EAP350 and the Power Adapter to an
available electrical outlet. Once both connections are
secure, verify the following:
a) Ensure that the POWER light is on (it will be blue).
b) Ensure that the WLAN light is on (they will be
blue).
c) Ensure that the LAN (Computer/EAP350
Connection) light is on (it will be blue).
d) Once all lights are on, proceed to set up the
EAP350 using the computer.

16
2.5 Mounting the EAP350
Using the provided device to be mounted on the ceiling
or wall.
To attach the EAP350 to a ceiling or wall using the
mounting bracket:
1. Attach the mounting bracket to the wall or ceiling
using the provide wall/ceiling mounting hardware kit.
2. Drill the holes to input the mounting screws.
3. Use the included screws to cross the mounting
bracket and attach the mounting bracket with the
mounting screws.
4. Mount the EAP350 on the mounting bracket by
rotating the device clockwise to secure it in place.
Wall

17
3Configuring Your Access Point
This section will show you how to configure the device
using the web-based configuration interface.
3.1 Default Settings
Please use your Ethernet port or wireless network adapter
to connect the EAP350.
Default Settings
IP Address
192.168.1.1
Username / Password
admin / admin
Operation Mode
Access Point
Wireless SSID
EnGeniusxxxxxx
Wireless Security
None
Note: xxxxxx represented in the wireless SSID above is the last 6
characters of your device MAC Address. This can be found on the
device body label and is unique for each device.
3.2 Web Configuration
Open a web browser (Internet
Explorer/Chrome/Firefox/Safari) and enter the IP
Address http://192.168.1.1
Note: If you have changed the default LAN IP Address of the
Access Point, ensure you enter the correct IP Address.
The default username and password are admin. Once
you have entered the correct username and password,
click the Login button to open the web-base
configuration page.
You will see the following webpage if login
successfully.

18

19
4Building a Wireless Network
The EAP350 has the ability to operate in various modes.
This chapter describes the operating modes of the
EAP350.
4.1 Access Point Mode
In Access Point Mode, EAP350 behaves likes a central
connection for stations or clients that support IEEE
802.11b/g/n networks. The stations and clients must be
configured to use the same SSID (Service Set Identifier)
and security password to associate with the EAP350. The
EAP350 supports up to eight SSIDs at the same time for
secure access.
4.2 WDS AP Mode
The EAP350 also supports WDS AP mode. This operating
mode allows wireless connections to the EAP350 using
WDS technology. In this mode, configure the MAC
addresses in both Access Points to enlarge the wireless
area by enabling WDS Link settings. WDS supports four
AP MAC addresses.
4.3 WDS Bridge Mode
In WDS Bridge Mode, the EAP350 can wirelessly connect
different LANs by configuring the MAC address and
security settings of each EAP350 device. Use this mode
when two wired LANs located a small distance apart want
to communicate with each other. The best solution is to

20
use the EAP350 to wirelessly connect two wired LANs, as
shown in the following figure. WDS Bridge Mode can
establish four WDS links, creating a star-like network.
Note: WDS Bridge Mode does not act as an Access Point. Access
Points linked by WDS are using the same frequency channel. More
Access Points connected together may lower throughput. This
configuration can be susceptible to generate endless network
loops in your network, so it is recommended to enable the
Spanning Tree setting (see 6.3 Spanning Tree Setting, below) to
prevent this from happening.
4.4 Repeater mode
The Repeater mode is used to regenerate or replicate
signals from a wireless router or other access
point/station that is unable to reach certain areas in a
building. When this mode is activated in the EAP350, the
EAP350 receives the wireless signal from an existing
router or AP and relays it to other devices within its range
so they can join the network.