EnGenius ENH200EXT User manual

LONG RANGE
WIRELESS ACCESS POINT / CLIENT BRIDGE
Model : ENH200EXT
User Ma ual
Versio : 1.0

Table of Contents
1 PRODUCT OVERVIEW......................................................................................................................................................5
1.1 F EATURE .......................................................................................................................................................................5
1.2 B ENEFITS .......................................................................................................................................................................6
1.3 P ACKAGE C ONTENTS ...................................................................................................................................................... 8
1.4 S YSTEM R EQUIREMENT ..................................................................................................................................................8
1.5 H ARDWARE O VERVIEW ..................................................................................................................................................8
2 ENH200EXT MULTI-FUNCTION IN TRUCTION GUIDE............................................................................................9
2.1 A CCESS P OINT ..............................................................................................................................................................9
2.2 A CCESS P OINT WITH WDS F UNCTION ............................................................................................................................9
2.3 C LIENT B RIDGE ............................................................................................................................................................ 11
2.4 WDS B RIDGE .............................................................................................................................................................. 11
2.5 C LIENT R OUTER ...........................................................................................................................................................12
3 COMPUTER CONFIGURATION IN TRUCTION ......................................................................................................... 13
3.1 A SSIGN A S TATIC IP .....................................................................................................................................................13
3.2 L OGGING M ETHOD ...................................................................................................................................................... 14
4 TATU ..............................................................................................................................................................................15
4.1 S AVE /L OAD ................................................................................................................................................................. 15
4.2 M AIN .........................................................................................................................................................................16
4.3 W IRELESS C LIENT L IST ................................................................................................................................................. 17
4.4 S YSTEM L OG ............................................................................................................................................................... 18
4.5 C ONNECTION S TATUS .................................................................................................................................................. 19
4. DHCP C LIENT T ABLE ...................................................................................................................................................20
5 Y TEM.............................................................................................................................................................................21
5.1 S WITCHING O PERATION M ODE ....................................................................................................................................21
6 WIRELE CONFIGURATION........................................................................................................................................ 23
.1 W IRELESS S ETTINGS .....................................................................................................................................................23
6.1.1 Access Point Mode ........................................................................................................................................ 23
6.1.2 Client Bridge Mode ....................................................................................................................................... 26
6.1.3 WDS Bridge Mode.........................................................................................................................................28
6.1.4 Client Router Mode ....................................................................................................................................... 30
.2 W IRELESS S ECURITY S ETTINGS ...................................................................................................................................... 32
6.2.1 WEP................................................................................................................................................................32
6.2.2 WPA-PSK ....................................................................................................................................................... 33
6.2.3 WPA2-PSK ..................................................................................................................................................... 34
6.2.4 WPA-PSK Mi ed ............................................................................................................................................ 35

6.2.5 WPA................................................................................................................................................................ 36
6.2.6 WPA2 .............................................................................................................................................................37
6.2.7 WPA Mi ed .................................................................................................................................................... 38
.3 W IRELESS A DVANCED S ETTINGS ................................................................................................................................... 39
.4 W IRELESS MAC F ILTER ................................................................................................................................................ 41
.5 WDS L INK S ETTINGS ................................................................................................................................................... 42
7 LAN ETUP.......................................................................................................................................................................43
7.1 IP S ETTINGS ................................................................................................................................................................ 43
7.2 S PANNING T REE S ETTINGS ...........................................................................................................................................44
8 ROUTER ETTING .........................................................................................................................................................45
8.1 WAN S ETTINGS .......................................................................................................................................................... 45
8.1.1 Static IP.......................................................................................................................................................... 45
8.1.2 DHCP (Dynamic IP) ......................................................................................................................................47
8.1.3 PPPoE (Point-to-Point Protocol over Ethernet) .......................................................................................... 49
8.1.4 PPTP (Point-to-Point Tunneling Protocol) .................................................................................................. 51
8.2 LAN S ETTINGS (R OUTER M ODE )..................................................................................................................................53
8.3 VPN P ASS T HROUGH ..................................................................................................................................................54
8.4 P ORT F ORWARDING .....................................................................................................................................................55
8.5 DMZ.......................................................................................................................................................................... 56
9 MANAGEMENT ETTING ...........................................................................................................................................57
9.1 A DMINISTRATION ........................................................................................................................................................57
9.2 M ANAGEMENT VLAN ................................................................................................................................................. 59
9.3 SNMP S ETTINGS ........................................................................................................................................................60
9.4 B ACKUP /R ESTORE S ETTINGS ........................................................................................................................................61
9.5 F IRMWARE U PGRADE ...................................................................................................................................................62
9. T IME S ETTINGS ............................................................................................................................................................ 63
9.7 L OG ............................................................................................................................................................................ 64
9.8 D IAGNOSTICS ..............................................................................................................................................................65
10 NETWORK CONFIGURATION EXAMPLE .................................................................................................................66
10.1 A CCESS P OINT ..........................................................................................................................................................66
10.2 C LIENT B RIDGE M ODE ............................................................................................................................................... 67
10.3 WDS B RIDGE M ODE ................................................................................................................................................. 68
10.4 C LIENT R OUTER ......................................................................................................................................................... 69
E UROPE – EU D ECLARATION OF C ONFORMITY ...........................................................................................................................72

About This Document
This document is written by EnGenius Inc. EnGenius Inc. has rights to change any of this
document without notice and all rights reserved. This document can only be used for guiding
the configuration setup of EnGenius products.
This document is to demonstrate the EnGenius ENH200EXT Wireless Access Point & Client
Bridge. Please read the document carefully before setup the ENH200EXT. If the damage is
caused by the inappropriate behaviors, the repair will not be included in the warranty.
Formats
This document uses following symbols to indicate and highlight special message.
Caution: This symbol represents the Vital message and it could be harmful for
the device or settings.
Note: This symbol represents the important message for the settings.
Tip: This symbol represents the alternative choice that can save time or
resources.
Before you start __________________________________________________
The following equipments are essential to setup the ENH200EXT:
1. One Computer/Notebook and internet accessible.
2. Two Ethernet Cables.
3. One EnGenius device – ENH200EXT.
The equipments listed above are only for setup the ENH200EXT, you will need
more equipment to connect the internet and it is depend on your internet network structure.
You may refer to the chapter 2 for more information.

1 Product Overview
Thank you for using ENH200EXT. It is a powerful, enhanced, enterprise scale product with 4
multi-functions Access Point, Client Bridge, WDS and Client Router.
ENH200EXT uses the latest wireless technology 802.11n standard. It has faster
transmit/receive wireless speed. ENH200EXT gives you a great advantage to save your time
and cost to expend your network. It is also compatible with 802.11b and 802.11g.
ENH200EXT is easily to install almost anywhere with Power over Ethernet for quick indoor
installation and regular Power by Adapter. ENH200EXT can manage power level control,
Narrow bandwidth selection, Traffic shaping and Real-time RSSI indicator. ENH200EXT is fully
support of security encryption including Wi-Fi Protected Access (WPA-PSK/WPA2-PSK),
4/128/152-bit WEP Encryption and IEEE 802.1x with RADIUS.
1.1 Feature
The following list describes the design of the ENH200EXT made possible through the power
and flexibility of wireless LANs:
a) Difficult-to-wire environments
There are many situations where wires cannot be laid easily. Historic buildings,
older buildings, open areas and across busy streets make the installation of LANs
either impossible or very expensive.
b) Temporary workgroups
Consider situations in parks, athletic arenas, exhibition centers, disaster-recovery,
temporary offices and construction sites where one wants a temporary WLAN
established and removed.
c) The ability to access real-time information
Doctors/nurses, point-of-sale employees, and warehouse workers can access
real-time information while dealing with patients, serving customers and
processing information.
d) Frequently changed environments
Show rooms, meeting rooms, retail stores, and manufacturing sites where
frequently rearrange the workplace.

e) Wireless extensions to Ethernet networks
Network managers in dynamic environments can minimize the overhead caused by
moves, extensions to networks, and other changes with wireless LANs.
f) Wired LAN backup
Network managers implement wireless LANs to provide backup for mission-critical
applications running on wired networks.
g) Training/Educational facilities
Training sites at corporations and students at universities use wireless connectivity
to ease access to information, information exchanges, and learning.
1.2 Benefits
Access Point Mode Use this feature to setup the access point’s configuration
Benefits
High peed Data Rate
Up to 1
50
Mbps
Capable of handling heavy data payloads such as MPEG video
streaming
High Output Power up
to 2
6
dBm
Extended excellent Range and Coverage
IEEE 802.11
b/g/n
Compliant
Fully Interoperable with IEEE 802.11b/IEEE 802.11g
/IEEE 802.11n
compliant devices
Multi
-
Function
Users can use different mode in various environment
Point
-
to
-
point,
Point-to-multipoint
Wireless Connectivity
Let users transfer data between two buildings or multiple
buildings
upport R I
Indicator (CB mode)
Users can select the best signal to connect with AP easily
Power-over-Ethernet
Flexible Access Point locations and cost savings.
ENH200EXT
must uses the adapter provided in the package
.
upport Multi
-
ID
function (4 ID) in
AP mode
Allow clients to access different networks through a single
access point and assign different policies and functions for each
SSID by manager
WPA2/WPA/ WEP/
IEEE 802.1x support
Fully support all types of security types.
MAC address filtering
in AP mode
Ensures secure network connection
PPPoE/PPTP function
support (AP
Router/CR mode)
Easy to access internet via ISP service authentication
NMP Remote
Configuration
Management
Help administrators to remotely configure or manage the
Access Point easily.
Qo (WMM) support Enhance user performance and density

information. It has support adjusting transmit power and channel.
Client can access the network with different regulatory settings
and automatically change to the local regulations.
Client Bridge Mode Use this feature to connect to an Access Point and enjoy the great
speed of surfing internet.
WD Mode Use this feature to link multiple APs in a network, All clients
associated with any APs can communicate each other like an
ad-hoc mode.
Client Router Mode This feature functions completely opposite but similarly with AP
Router Mode. Client Router connected to an AP wirelessly and
transmit internet connection protocol through AP to access the
internet.
Multiple IDs ENH200EXT supports up to 4 SSIDs on your access point. The
following options can be set to each SS to each SSID:
-SSID for public or private network
-Authentication is fully supported
-VLAN identifier
-Radius accounting identifier
-Profile isolation for infrastructure network
VLAN Specify a VLAN number for each SSID to separate the services
among clients.
Qo Use this feature to limit the incoming or outgoing throughput.
Wi-Fi Protect Access Wi-Fi Protect Access is a standard-based interoperable security
enhancement that increases the level of data protection and
access control for existing and future wireless LAN system. It is
compatible with IEEE 802.11i standard WPA leverages TKIP and
802.1X for authenticated key management.

1.3 Package Contents
Open the package carefully, and make sure that none of the items listed below are missing.
Do not discard the packing materials, in case of return; the unit must be shipped in its original
package.
1* Wireless Access Point / Client Bridge (ENH200EXT)
1* 24V/0. A Power Adapter
1* PoE Injector(EPE-24R)
1* Pole Mount
1* QIG
1* CD (User Manual)
Using other Power Adapter than the one included with ENH200EXT may cause damage of the
device.
1.4 ystem Requirement
The following conditions are the minimum system requirement.
A computer with an Ethernet interface and operating under Windows XP, Vista, 7 or
Linux.
Internet Browser that supports HTTP and JavaScript.
1.5 Hardware Overview
Physical Interface - 1 x Port with PoE support
- 1 x Reset
Data rate 150 Mbps
LEDs status - Power Status
- LAN (10/100Mbps)
- WLAN (Wireless is up)
- 3 x Link Quality (Client Bridge mode)

2 ENH200EXT Multi-Function Instruction Guide
2.1 Access Point
In the Access Point Mode, ENH200EXT function likes a central connection for any stations or
clients that support IEEE 802.11b/g/n network. Stations and Client must configure the same
SSID and Security Password to associate within the range. ENH200EXT supports 4 different
SSIDs to separate different clients at the same time.
2.2 Access Point with WD Function
ENH200EXT also supports WDS function in Access Point Mode without losing AP’s capabilities.
Configure others Access Point’s Wireless MAC Address in both Access Point devices to
enlarge the wireless area by enabling WDS Link Settings. WDS function can support up to 8
different AP’s MAC addresses.
Not every Access Point device has support WDS in Access Point Mode. It is
recommended using ENH200EXT if you would like to use this service.
ENH200EXT
Client Client
Client
ENH200EXT
Client
WDS
ENH200EXT
Client
Client
Client
Client
SSID1
SSID2
SSID3
SSID4
Ethernet
Client
Client Client

2.3 Client Bridge
In the Client Bridge Mode, the ENH200EXT function likes a wireless client connecting to an
Access Point wirelessly and surf internet whenever you want. Using Site Survey to scan all the
Access Point within the range and configure its SSID and Security Password to associate with
it. Connect you station to the LAN port of the ENH200EXT via Ethernet.
2.4 WD Bridge
In the WDS Bridge Mode, the ENH200EXT can wirelessly connect different LANs by just simply
configure each other’s MAC Address and Security Settings. This mode is used when two wired
LANs locate in small distance and want to communicate each other. The best solution is using
ENH200EXT wirelessly connect two wired LANs. WDS Bridge Mode can establish 1 WDS links,
the network diagram is like a Star.
WDS Bridge Mode is unlike Access Point. APs linked by WDS are using the same
frequency channel, more APs connected together may lower throughput. Please be aware to
avoid loop connection diagram, otherwise enable Spanning Tree Function.
Access Point /
Wireless Router
Internet
ENH200EXTClient
ENH200EXT
WDS
ENH200EXT
WDS
WDS
Client
WDS
Client
ENH200EXT
Client
ENH200EXT
ENH200EXTClient

2.5 Client Router
In the Client Router Mode, the ENH200EXT has DHCP Server build inside that allows many
LANs automatically generate an IP address to share the same Internet. Connect an AP/WISP
Wirelessly and connect to LANs via wired. Client Router Mode is act completely opposite to
the AP Router Mode.
ENH200EXT
AP / WISP
PC
PC
PC

3 Computer Configuration Instruction
The default operating mode is Client Bridge. Client Bridge will not assign an IP address to the
computer/notebook. Therefore, follow the steps to assign an IP address to your Ethernet card.
3.1 Assign a tatic IP
In order to configure ENH200EXT, please follow the instruction below:
1. In the Control Panel, double click Network
Connections and then double click on the
connection of your Network Interface Card (NIC).
You will then see the following screen.
2. Select Internet Protocol (TCP/IP) and then click
on the Properties button. This will allow you to
configure the TCP/IP settings of your PC/Notebook
3. Select Use the following IP address radio button
and then enter the IP address and subnet mask.
Ensure that the IP address and subnet mask are on
the same subnet as the device.
4. Click on the OK button to close this window, and
then close LAN properties window.
IP Address entered in the TCP/IP Properties needs to be at the same subnet of the
ENH200EXT IP Address. For example: ENH200EXT’s default IP Address is 192.168.1.1 so the IP
Address in the TCP/IP settings could be 192.168.1.10.

3.2 Logging Method
After complete the IP settings from last section, you can now access the web-based
configuration menu.
1. Open web browser
2. Enter IP 192.168.1.1 into you address filter.
Caution: If you have changed the ENH200EXT LAN IP address, make sure you enter the correct
IP Address.
3. After connected to the ENH200EXT successfully, browser will pop out a Windows Security
window. Please enter the correct Username and Password.
4. The default Username and Password are both admin.
If you have changed the Username and Password, please enter your own
Username and Password.

4 tatus
tatus section is on the navigation drop-down menu. You will then see three options: Main,
Wireless Client List, System Log, WDS Link Status, Connection Status, and DHCP Client Table.
Each option is described in detail below.
4.1 ave/Load
This page allows viewing the modified changes. The changes show in the Unsaved changes
list table. You can decide to cancel all the changes or to compile to the new setting.
You cannot cancel the specific settings. You can only compile all the settings or revert to the
previous settings.

4.2 Main
Click on the Main link under the tatus drop-down menu or click Home from the top-right
of the webpage. The status that is displayed corresponds with the operating mode that is
selected. Information such as operating mode, system up time, firmware version, serial
number, kernel version and application version are displayed in the ‘System’ section. LAN IP
address, subnet mask, and MAC address are displayed in the ‘LAN’ section. In the ‘Wireless
section, the frequency, channel is displayed. Since this device supports multiple-SSIDs, the
details of each SSID, such as ESSID and its security settings are displayed.

4.3 Wireless Client List
Click on the Wireless Client List link under the tatus drop-down menu. This page displays
the list of Clients that are associated to the ENH200EXT.
The MAC addresses and signal strength for each client is displayed. Click on the Refresh
button to refresh the client list

4.4 ystem Log
Click on the ystem Log link under the tatus drop-down menu. The device automatically
logs (records) events of possible interest in its internal memory. If there is not enough internal
memory for all events, logs of older events are deleted, but logs of the latest events are
retained.

4.5 Connection tatus
Click on the Connection tatus link under the tatus drop-down menu. This page displays
the current status of the network, including network type, SSID, BSSID, connection status,
wireless mode, current channel, security, data rate, noise level and signal strength.

4.6 DHCP Client Table
Click on the DHCP Client List link under the tatus drop-down menu. This page displays the
list of Clients that are associated to the ENH200EXT through DHCP.
The MAC addresses and signal strength for each client is displayed. Click on the Refresh
button to refresh the client list.