Enovate Medical ENVOY 2.0 User manual

ENVOY 2.0 QUICKSTART GUIDE
QS011-Rev 1 - 8.8.2023

2
IMPORTANT INFORMATION...............................................................................3
POWERING UP OR CHARGING THE ENVOY ........................................................4
TO LOGIN OR ACCESS VIDEO TUTORIALS ..........................................................5
HOME SCREEN OVERVIEW................................................................................6
ACCESSING USER PERSONAL SETTINGS..........................................................7
HEIGHT ADJUSTMENT & ACCESSING MEDICATION BINS & DRAWERS .............8
MONITOR ADJUSTMENT / AUTOTRAX CASTERS ...............................................9
CONTENTS

3
!
1
Emergency
Stop Button
Power Indicator lights up blue
when powered on
Charging Plug for Corded and MobiusPower
Plus workstations
IMPORTANT INFORMATION
REAR VIEW
USB Charging
Port
Before powering on your workstation check that the Emergency Stop Button is not pushed in. If it is,
twist the knob left and release to re-activate the up/down movement:

4
2Corded: Plug the workstation into an electrical outlet to recharge
Cordless: Insert a charged MobiusPower™ battery pack:
CORDED:
POWERING UP OR CHARGING THE ENVOY
CORDLESS
Plug into wall socket
Insert a fully charged MobiusPower
Battery Pack

5
To login in as a guest, select "Log in as Guest" from the user list or login with your "PIN Code". You will then
be taken to the main screen. To access the video tutorials, press "Video Tutorials” on the login screen:
TO LOGIN OR ACCESS VIDEO TUTORIALS
To Badge -Tap in, please see your IT department for instructions.
3
LOGIN SCREEN
To access the video tutorials, press
"Video Tutorials” on the login screen.
To login in as a guest, select "Log in as
Guest" the default guest code is 1234.

6
HOME SCREEN OVERVIEW
*"Report Issue" feature available on workstations connected to Rhythm™
** "Restart PC" must be enabled by your IT support team
*
**
For full details please review the Envoy 2.0 Sofware User Guide here:
4
Guest User
Report Issue
PC Restart
Battery Power

7
5
Program your sit or stand position, adjust brightness of keyboard and worksurface lights, adjust touch display timeout:
ACCESSING USER PERSONAL SETTINGS

8
6HEIGHT ADJUSTMENT & ACCESSING MEDICATION BINS & DRAWERS
Home Screen Detail View - Medbin Unit
Med Bin Login Screen
Depress the up/down icons on the touch display to raise or lower workstation or if your workstation has
medbins, use the blue up/down arrow keys at the base of the monitor pole:
To access medbins:
1. Tap the RX icon on the touch display
The factory preset pin is 1-2-3-4 plus enter
2. Enter you PIN and tap enter
• Single tap of height adjustment controls moves the height up or down by 1"
• Depress and hold height adjustment controls, release when desired height is reached
• Double tap arrows for pre-programmed sit/stand positions

9
• For direct eye-to-eye patient engagement, adjust the monitor to
the reclined position
• For safe travel, adjust the monitor to the reclined position
• For seated ergonomics, lower the monitor to the extended
position
Upright
Extended
Reclined
SightLine™ Monitor Arm positions are designed for ergonomic comfort, enhanced patient engagement
and safe travel down busy hallways:
Monitor Rotation 800 left or right (remove the rotation limiter pin to
rotate fully to the right)
MONITOR ADJUSTMENT / AUTOTRAX CASTERS
7
• AutoTrax™ steer assist automatically
engages for effortless steering.
You will hear an audible click when
AutoTrax engages or disengages. To
release AutoTrax casters, pull the
workstation toward you.
• Press down on brakes to lock casters,
and push the brakes up to release.

1152 Park Avenue
Murfreesboro, TN 37129
p. [phone] f. [phone]
www.enovatemedical.com
ENVOY 2.0 QUICK START GUIDE
©2023 Enovate Medical LLC. All Rights Reserved