Enovate Medical Envoy Operating and maintenance instructions

www.enovatemedical.com
07. 17. 18
Enovate Medical Envoy Quick Start Guide
please refer to the product manual for full product de tail s
QS007-01
Quick Start guide

www.enovatemedical.com
07. 17. 18
Enovate Medical Envoy Quick Start Guide
please refer to the product manual for full product de tail s
!
CHARGING THE WORKSTATION
2
1Plug the workstation into an electrical outlet to charge, or if the unit is a Mobius
workstation, insert a fully charged Mobius battery.
IMPORTANT - STEPS 1 AND 2 MUST BE FOLLOWED IF THIS IS THE FIRST TIME THE UNIT IS BEING
TURNED ON OR IF THE UNIT HAS BEEN INACTIVE FOR A PROLONGED PERIOD OF TIME RESULTING IN
COMPLETE POWER DRAINAGE.
Emergency
Stop Button
Power On Button
The power button is located in the rear of the workstation. Push the power on button
until the blue light comes on;you will hear a confirmation beep when the workstation is
powered on. IMPORTANT: Check to ensure that the emergency stop button is not
pushed in. If it is, pull it out to re-enable the actuator power. (The emergency stop
button interrupts the up/down movement of the workstation.)
Charging plug (non Mobius
workstations only)
STARTING WORKSTATION
STARTING WORKSTATION

www.enovatemedical.com
07. 17. 18
Enovate Medical Envoy Quick Start Guide
please refer to the product manual for full product de tail s
Emergency
Stop Button
Once the workstation is powered on, the login touch screen will appear (this takes
approximately 30 seconds). There are two ways to login to your workstations, see step 3.
Nurse Jane
Jason B. - Respitory
Dr. Farrell - Pediatrics
Dr. Mark D. - Director
GUEST
Enter Unique ID to Unlock
1
54
3
ENTER
2
6
7 8 9
<0
LOGGING INTO THE WORKSTATION
User Login Screen
3
1. Key FOB Login
•Ensure your key FOB is powered on.
•Select your name from the list when it appears and enter your PIN code.
(Please see your IT department for PIN code details).
2. Manual Login
•Sign in as a "Guest" by selecting "Guest" from the user list or select your
name and then enter your PIN code or Guest code. (Please see your IT
department for PIN code and Guest code details).

www.enovatemedical.com
07. 17. 18
Enovate Medical Envoy Quick Start Guide
please refer to the product manual for full product de tail s
USER INTERFACE
Adjust Keyboard
Light
Increase Decrease
Adjust
workstation
height sit/
stand
Main
Battery
Charge
Restart the
PC
Estimated
remaining
runtime main
battery
Adjust
workstation
height up/
down
Main
Battery,
remaining
Charge
*Submit a
trouble ticket
Home Screen detailed Vie w
4Adjust the height of the workstation with the up/down arrow keys on the
touch display. If the workstation has a medbin unit, please see the next
illustration.
* Submit a trouble ticket feature only available on workstations powered by RHYTHM.
Day/Night
Mode
Administrative
Settings
USER ID

www.enovatemedical.com
07. 17. 18
Enovate Medical Envoy Quick Start Guide
please refer to the product manual for full product de tail s
HEIGHT ADJUSTMENT
5For workstations with medication drawers, use the up/down arrow keys on the
workstation located directly in front of the monitor pole.
(See touch display user interface for full details.)
IMPORTANT: If your workstation
has medication bins, the up/
down arrow icons will be
replaced with a medbin icon.
Up/Down Arrow Keys
Home Screen detail View - medbin unit
USER ID