Ercol Shalstone Tallboy 80311504 User manual

Shalstone Tallboy
Thank you for purchasing this Shalstone Tallboy. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product. WARNING: In order to prevent overturning
this product must be used with the wall attachment device provided.
Necessary Tools
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product.
Please check the pack contents before attempting to assemle this product.A full checklist of components
is given in this leaflet. If any components are missing, please contact the retailer from whom you bought
this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product is product takes approximately 20 MINUTES TO assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROMYOUNG
CHILDREN.
ercol
Stock number 80311504

Fittings and parts checklist
AScrew (3,5mm x 16mm) x 1
BWedges x 2
CTextile Strap x 1
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily pull
away from the core
structure
Wall fixing - if in doubt seek professional advice
Brick or Masonry
Use an appropriate
wall plug provided you
are sure your wall is
sound
Cavity wall
Special toggle
wall plugs are
needed. Seek
expert advice
1. Screw the textile strap on to the back edge of top panel of the item at centre point using short screw
provided.
Position the item against the wall where you want it to go
2. Attach the textile strap using screws suitable for your type of wall, see Wall fixings above.

3. If after attaching your cabinet to the wall it is not standing level, use the wedges ( B ) provided.
Push a wedge under the corner of your cabinet until it becomes level, (fig.4) then snap it off as shown in fig.5
Finally tap any of the wedge still protruding out from under the furniture, fig.6
FRONT
A
fig. 4 fig. 5 fig. 6
C

Care and Maintenance
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com
Wood Furniture
Wood displays different grain patterns depending on which way it is cut - for example, the ‘medullary ray’ which
can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty
of wood. Some furniture is also deliberately aged and rustic.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from items
that have been previously purchased.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.When using the
surface for serving food and drinks it is best to use protective mats and coasters. Spillages should be wiped up as
soon as possible.
Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface by building up
over time. Use of cleaning materials containing abrasive compounds, acidic or caustic reagents and any bleaches
containing oxidising reagents should be avoided as prolonged use may damage the lacquer surface.
Wipe up spills immediately. If sticky marks occur on the surface they can be removed with a dilute solution of
warm soapy water.The offending area should be rubbed lightly and then completely dried immediately afterwards,
before replacing any mats etc.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by central
heating can cause damage such as warping.
Safety Instructions
Never drag furniture when moving it, always lift it. Please take care when handling or moving the furniture
as careless handling may cause damage or injury. No liability will be accepted for damage or injury caused by
incorrectly installed furniture.