Ergotron Glide Upgrade User manual

1 of 2
300-5090-00 rev. C • 09/19
Glide Upgrade & Retrofi t
www.ergotron.com | USA: 1-800-888-8458 | Europe: [phone] | China: 400-120-3051 | Japan: [email protected]
User's Guide
These Assembly Instructions are for both the Glide Upgrade & Glide Retrot. They should be used as a supplement to
your cart instructions.
The AnthroCart (shown shaded) is not included with this accessory. A 5/32”Hex Driver &Adjustable Crescent Wrench
(both not included) will be required for this assembly. They are included with your cart.
SAVE THESE INSTRUCTIONS!
01– Insert Screws ...........................Qty. Varies........... 325-5052-00
02– AnthroCart Glide Inserts ........... Qty. Varies........... 525-1004-00
Fit Glide Insert.........................Qty. Varies........... 525-5033-00
03– Glides ......................................Qty. Varies........... 325-5042-00
Component part #’s for the Glide Upgrade & Retrot. 02
03
01

2 of 2
300-5090-00 rev. C • 09/19
© 2015 Ergotron, Inc. All rights reserved.
www.ergotron.com | USA: 1-800-888-8458 | Europe: [phone] | China: 400-120-3051 | Japan: [email protected]
Step 1
If needed, remove all Caster Inserts from the Base Tube us-
ing a 5/32” Hex Driver.
NOTE: Only install the AnthroCart Glide Insert into an
AnthroCart and the tGlide Insert into a tSystem cart.
Install all (AnthroCart or tSystem) Glide Inserts into the
Base Tube and secure with one Insert Screw per Glide
Insert.
Insert Screw
325-5052-00
Step 2
Thread each Glide into a Glide Insert.
TIP: After your Cart assembly is complete, the overall height
may be adjusted by rotating the Glides. An Adjustable Cres-
cent Wrench will make this process easier.
COUNTERCLOCKWISE rotation will lower the overall height.
CLOCKWISE rotation will raise overall height.
Congratulations! Your Glide installation is complete.
Insert Screw
Glide Insert
Thread each Glide
into a Glide Insert
Base Tube
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
For the latest User Installation Guide please visit: www.ergotron.com