Ergotron Zido ZGBCG User manual

1 of 3
300-5411-00 rev. E • 08/19
Zido™ Glove Box Holder
www.ergotron.com | USA: 1-800-888-8458 | Europe: [phone] | China: 400-120-3051 | Japan: [email protected]
Product Part#
Zido Glove Box Holder ZGBCG
User's Guide
NOTE: The Zido cart (shown shaded) is not included.

2 of 3
300-5411-00 rev. E • 08/19
01 – GLOVE BOX................................................................................... QTY 1
02 – SELF TAPPING SCREW............................................................... QTY 2
PARTS LIST
Before beginning assembly of your Zido Glove Box
Holder, please review the parts list to verify that your
shipment is complete.
A 5/32" hex head driver (provided with your Zido cart) is
required for this assembly.
WELCOME
Thank you for purchasing your
Zido Glove Box Holder!
If you have any questions or if we
can help you in any way, please
contact us at 800.325.3841.

3 of 3
300-5411-00 rev. E • 08/19
© 2015 Ergotron, Inc. All rights reserved.
www.ergotron.com | USA: 1-800-888-8458 | Europe: [phone] | China: 400-120-3051 | Japan: [email protected]
CONGRATULATIONS! YOUR GLOVE BOX HOLDER ASSEMBLY IS COMPLETE!
STEP 1
Select an Installation Point
Select an installation point for your Glove Box. If you will install over a Shelf Bracket, go to Step 3. If you will
install onto the Zido tube, go to Step 2.
STEP 3
Install the Holder over a Shelf/Bin Bracket
While one person holds the Shelf or Bin in place,
another person carefully removes the fasteners
from the Shelf Bracket and sets them aside.
Align the holder over the bracket.
Secure using the three self-threading fasteners.
STEP 2
Install the Holder onto the Zido tube
Align the holes on the Glove Box Holder with
the holes on the Zido tube.
Secure using two self-threading fasteners.
Note: These fasteners are cutting the threads in
the tube, so the rst few turns will require some
force.
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
For the latest User Installation Guide please visit: www.ergotron.com