Ericsson DIALOG 4222 OFFICE User manual

IS Telecommunication Services
Model4222UserGuide 2011.doc Page 1 of 7 Revised on 3-17-11
User Guide
Model 4222 Display Phone
If you need assistance with your phone, please contact the UMW Help Desk at, 68643. A telecom representative will
contact you to schedule a training session with you as soon as possible.

IS Telecommunication Services
Model4222UserGuide 2011.doc Page 2 of 7 Revised on 3-17-11
Contents
Overview and Display Screen Examples- Page 4
Program Button- Page 5
Divert Button- Page 6
Conference Button- Page 6
Transfer Button- Page 6
Call Back- Page 6
Dialing Instructions- Page 7
Transferring your phone to an External Number- Page 7

IS Telecommunication Services
Model4222UserGuide 2011.doc Page 3 of 7 Revised on 3-17-11
Model 4222 Telephone User Guide
Overview
This User Guide will help you use your new phone. Your basic phone template will look like the image below. There will
be some variation if you have additional lines on your phone.
Your Telephone Number
PROGRAM
CALL
DIVERT
TRANSFER
INQUIRY
MESSAGE
WAITING
LINE 1
CONF
LINE 2
ACCEPT
2ND CALL
Below are examples of the display screen:
When your phone is idle, the display shows the time, date, and your extension number.
Idle View
When you make an outgoing call you will see the dialed name (if available) and the phone number dialed. If the phone is
diverted, the display will show you the call forward icon and that it is diverting. It may show you the number and name it is
diverting to (if available).
Outgoing Call View
When you receive an incoming call, the screen will display the incoming number. You may see the calling party’s name if
available. If the call is coming from a diverted extension, you will see the originating name as well. In this example,
number 2222 has dialed 4444 and the 4444 is directly diverted to you.
Incoming Call View

IS Telecommunication Services
Model4222UserGuide 2011.doc Page 4 of 7 Revised on 3-17-11
Model 4222 Telephone User Guide, cont’d
Program Button- This allows you to change the ring tone of the phone, program speed dial keys and change ring
options of lines that may appear on your phone.
Changing the Ring Tone
Press the next to “Program”
Press the numbers 1-0 on the key pad until you hear the ring tone you like
Press the next to “Program”. This ring tone has been saved.
To add, change a speed dial number: the only keys that can be programmed as speed dials are the
Keys that are blank on the template.
Press the next to “Program”, light will come on.
Press the line you want to change, light will come on.
Enter the new phone number; be sure to enter the 9 if external number.
Press the same line, light will go out
Press the next to “Program”, light will go out.
To delete a speed dial number:
Press the next to “Program”, light will come on.
Press the line you want to delete, light will come on.
Press the “C” button on the bottom right of the phone
Press the same line, light will go out
Press the next to “Program”, light will go out.
To change the way a line that appears on your phone rings:
Press the next to “Program”, light will come on.
Press the line you want to change, light will come on.
Enter the ring pattern:
0= no ring, key will flash only
1= normal ring
2= Rings after the main phone rings 3 times, normal volume level (note, the main
phone will continue to ring)
3= Rings twice at the same time the main phone rings, continues to flash.
Ring tone has a lower volume level
4= Rings after the main phone rings 3 times. Ring tone has a lower volume level
Press the line you changed, light will go out
Press the next to “Program”, light will come on.

IS Telecommunication Services
Model4222UserGuide 2011.doc Page 5 of 7 Revised on 3-17-11
Model 4222 Telephone User Guide, cont’d
Divert Button:
Press the next to “Divert”, all calls will now go to your pre-programmed location. Default for
this button is Voice Mail, 55555
To remove the Diversion:
Press the next to “Divert”
CONF Button:
To establish a conference call: After contacting the first party
Press an unlit “line button” or "Inquiry" button.
Dial second party, after they answer, Press the next to "CONF. You will hear a confirmation "Tone" that
indicates all parties are connected. To add additional parties, repeat the process.
Transfer Button:
To transfer a caller to another line: with the caller on the line
Press an unlit “line button” or "Inquiry" button
Dial second party, after they answer, announce that you are transferring a call to them
Press the next to “Transfer”
If the phone that you are transferring to is not answered, you can Press the “C” on the bottom of the phone. That clears
the line you were on. Press the Line where the person you were speaking to is holding. You are now connected to them.
If they would like to be transferred to the persons Voice Mail directly, without ringing the phone:
Press an unlit “line button” or "Inquiry" button
Dial the Voice Mail Main Number, X 5-5555
When you hear your voice, Press the [*] key. This will bring you to the Main Menu
Enter the person’s mailbox number to transfer to
Press the next to “Transfer”
***Be sure to press the Transfer immediately. Otherwise the person you are transferring will not
hear the mailbox greeting
Call back:
When placing a call to another Internal number, if the line is not answered, busy or diverts to voice mail, before hanging
up the receiver:
Press the next to “Call Back”, light will come on
Once the person you called picks up the handset to their phone, your phone will start ringing (no connection has been
made). In the display you will see their name and number (if available)
If you still want to speak with them, pick up your receiver and their phone will ring.

IS Telecommunication Services
Model4222UserGuide 2011.doc Page 6 of 7 Revised on 3-17-11
Model 4222 Telephone User Guide, cont’d
Dialing from your phone:
Lines 1 and 2-These 2 lines are where incoming calls come in on if your phone number is dialed.
Inquiry button-This button can be used to make outbound calls without tying up your Access Lines.
Accept 2nd Call Button-If the light is on for this button you will be able to get 2 calls to your phone. If it is not lit and you
are on a call on one of your Lines and another call comes in, the caller would be sent to your diversion point. In most
cases this is voicemail. You can turn the Accept 2nd Call Button on and off even during a call.
Placing a call on Hold-
•Press the Line Button that you are talking on. The call is placed on hold. To get the call again, press the Line
again, the call is now live.
•If you are on a call and another line is ringing, press the ringing line to answer. The original call you were on is
automatically placed on hold. To get back to the original call, press the line of the original call. If the other call is
still live, that call will now be on hold.
To make internal calls:
Dial the 5-digit extension number
To make calls off campus:
Local and Long Distance Calls- 9+10 digit phone number
International Calls- 9+ 011, country code city code
***Note*** The calling area that is set to your phone is what controls where you can call to.
If you need to make a call outside of the area you are allowed, a manager will need to
approve the change to the calling area.
Information- 9+411
To reach the school operators from your phone- press zero or dial 60029
To reach the hospital operators- 41000
To transfer your phone line to an External phone number:
Get dial tone on the line you want to Externally Forward:
•Press- *23# 9 plus the 10 digit phone number, then # sign
•Calls should now ring to the External Number
To remove the External Forwarding:
•Get Dial Tone on the line to Unforward
•Press #23#
•Calls should now ring to the phone
***Note***
If you are going to transfer your number off site on a regular basis, it is recommended that you setup the Personal
Number Feature. This needs management approval for setup. Click on this link for further information:
http://inside.umassmed.edu/Wiki.aspx?id=46826

IS Telecommunication Services
Model4222UserGuide 2011.doc Page 7 of 7 Revised on 3-17-11