Etac Clean Series Instructions for use

78673B 19-12-11
Clean
Clean 24”
Clean HRB
Washing and cleaning instructions for the product are found on the product
as well as in the product's manual. When cleaning the chassis in a washer,
the product must be secured in an upright position with locked wheels.
The product can be safely cleaned at 85°C for 3 minutes.
Clean the product with a solvent-free cleaning agent with a pH level between
5 and 9, or with 70% rubbing alcohol.
The frequency of inspection/reconditioning depends on how often and how intensively the product is used. Always use Etac's original parts. For more information about the
product, refer to the manual available at www.etac.com.
Remember that the service life of the product is limited (see manual). This is particularly important when instructing users who are expected to use the product for an
extended period of time.
Inspection Deviation Solution
Clean
Clean HRB
Clean 24”
Chassis
The chassis has paint damage Repair the damage with Etac's touch-up paint.
RAL 9003 (Gloss 90)
The chassis has mechanical damage which
can affect the product's function/safety Scrap the product
Plastic back
The plastic back is damaged, has cracks,
burrs or sharp edges Replace the plastic back
The plastic back is not secured Tighten all screws to 3 Nm torque
Screw cannot be tightened Replace plastic back
Soft back The soft back is damaged, has tears, holes,
broken seams, broken snap locks Replace the soft back
Reconditioning
Cleaning
Reconditioning/reuse
Etac Clean
Reconditioning instructions

78673B 19-12-11
Etac Clean
Reconditioning instructions
Inspection Deviation Solution
Clean
Clean HRB
Clean 24”
Arm supports
The arm supports are damaged, have cracks, burrs
or sharp edges Replace the arm supports
Arm supports are hard to fit/remove Clean arm support and mounting
Arm supports are hard to fit/remove Replace malfunctioning part (arm support,
seat, arm support lock)
Arm support cannot be locked Replace malfunctioning part (arm support,
seat, arm support lock)
Seat
The seat is damaged, has cracks,
burrs or sharp edges Replace the seat
The seat is not secured Tighten all screws under the seat to
3 Nm torque
Screw cannot be tightened Replace the seat
Castor wheel/castor wheel attachment
Castor wheel/castor wheel attachment is
damaged, has cracks, burrs or sharp edges Replace the castor wheel
The tread is worn Replace the castor wheel
Castor wheel is stiff/does not rotate Clean castor wheel
Castor wheel is stiff/does not rotate Replace the castor wheel
The brake does not lock Replace the castor wheel
The castor wheel is not secured Tighten all screws beneath the wheel
attachment to 4.5 Nm torque
Screw cannot be tightened Replace the castor wheel
Foot support The foot support is damaged, has cracks,
burrs or sharp edges Replace the foot support
Height adjustment Wing nuts are loose Tighten the wing nuts
Wing nuts cannot be tightened Replace screw and wing nut
Rear wheel adapter
Rear wheel adapter is damaged, has cracks,
burrs or sharp edges Replace the rear wheel adapter
The rear wheel adapter is not secured Tighten the screws
Rear wheel
Rear wheel is damaged, has cracks,
burrs or sharp edges Replace rear wheel
The tread is worn Replace rear wheel
Rear wheel is stiff Replace rear wheel
Rear wheel is not secured Tighten screw/nut
Brake
The brake is damaged, has cracks,
burrs or sharp edges Replace the brake
The brake does not lock Adjust the brake position
The brake does not lock Replace the brake
Reconditioning