Everlast EV200 User manual
EV200 MAGNETIC
ROWER
RETAIN FOR FUTURE REFERENCE
Dyaco Canada Inc. 5955 DON MURIE STREET, NIAGARA FALLS, ONTARIO L2G 0A9
OWNER`S
MANUAL
Model No.
16805132000
xAssembly
xOperation
xExercise
xParts
xWarranty
CAUTION:
You must read and
understand this
owner’s manual
before operating
unit.
Customer Service 1-888-707-1880
Manufacturer's One-Year Limited Warranty
Your EVERLAST Rower is warranted for one year from the date of purchase against defects in
material when used for the purpose intended, under normal conditions and provided it receives
proper care. Any part found defective or missing will be sent at no cost when returned in
accordance with the terms of this warranty.
Frame: 1 year
Parts: 1 year
This warranty is not transferable and is extended only to the original owner.
The warranty shall not apply to exercise units that are (1) used for commercial or other income
producing purposes or (2) subject to misuse, neglect, accident or unauthorized repair and
alterations.
This warranty provided herein is lieu of all other express warranties; any implied warranties,
including any implied warranties of merchantability of fitness for particular purpose, are limited
in duration to the first 12 months from date of purchase. All other obligations or liabilities,
including liability for consequential damages, are hereby excluded. The warranty registration
can be completed online: Go to www.dyaco.ca/warranty.html and complete the online
warranty registration.
REPAIR PARTS AND SERVICE
All of the parts for the Rower, shown in figure, can be ordered from Dyaco Canada Inc. 5955
DON MURIE STREET, NIAGARA FALLS, ONTARIO L2G 0A9. When ordering parts, the parts
will be sent and billed at the current prices. Prices may be subject to change without notice.
Check, or money order must accompany all orders. Standard hardware items are available at
your local hardware store.
To ensure prompt and correct handling of any errors, or to answer any questions, please call our
Toll Free number: 1-888-707-1880, or local number 1-905-353-8955 or fax 1-905-353-8968 or
to 5:00 PM Monday to Friday Eastern Standard Time.
Always include the following information when ordering parts
zModel number
zName of each part
zPart number of each part
TABLE OF CONTENTS
WARRANTY 2 SET UP INSTRUCTIONS 17
SAFETY PRECAUTION 3 FUNCTION INSPECTION 18
BEFORE YOU BEGIN 4 FOLDING INSTRUCTIONS 19
PRE-ASSEMBLY CHECK LIST 5 USER DIRECTION 20
HARDWARE PACKING LIST 6 MAINTENANCE 20
ASSEMBLY INSTRUCTIONS 7-12 TROUBLESHOOTING 21
PARTS LIST 13-15 GENERAL MAINTENANCE 22
DIAGRAM 15 TRAINING GUIDELINES 23-26
MONITOR INSTRUCTIONS 16-17 STRETCHING 27-28
Customer Service 1-888-707-1880
SAFETY PRECAUTIONS
Thank you for purchasing our product. Even though we go to great efforts to ensure the quality of each
product we produce, occasional errors and /or omissions do occur. In any event, should you find this
product to have either a defective or a missing part, please contact us for a replacement.
This product has been designed for home use only. Product liability and guarantee conditions will not be
applicable to products being subjected to professional use or products being used in a gym center.
This exercise equipment was designed and built for optimum safety. However, certain
precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire
manual before assembly and operation of this machine. Also, please note the following safety
precautions:
1. Read the OWNER'S OPERATING MANUAL and all accompanying literature and
follow it carefully before using your rowing machine.
2. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced
while using this equipment, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
3. Inspect your exercise equipment prior to exercising to ensure that all nuts and bolts
are fully tightened before each use.
4. The rowing machine must be regularly checked for signs of wear and damage. Any part found
defective must be replaced with a new part from the manufacturer.
5. Fitness equipment must always be installed on a flat surface. It is recommended to use an
equipment mat to prevent the unit from moving while it is being used, which could possibly scratch
or damage the surface of your floor.
6. No changes must be made which might compromise the safety of the equipment.
7. It is recommended to have a minimum of 2' safe clearance around the exercise equipment while in
use.
8. Ensure that the rail is locked properly when in storage.
9. Do not allow children to use or play on the rower. Keep children and pets away from this equipment
at all times while exercising.
10. The rower should only be used by one person at a time.
11. Maximum user weight 300lbs (136KG).
12. Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward. This allows
your heart rate to gradually increase and decrease and will help prevent you from straining muscles.
13. Never hold your breath while exercising. Breathing should remain at a normal rate in
conjunction with the level of exercise being performed.
14. Always wear suitable clothing and footwear while exercising. Do not wear loose fitting clothing that
could become entangled with the moving parts of your rowing machine. Do not exercise in bare feet or
socks. Proper footwear such as running, walking or cross training shoes should be worn.
15. Tie all long hair back. Remove all personal jewelry before exercising
16. Be careful to maintain your balance while using, mounting, dismounting the rower; loss of balance
may result in a fall and bodily injuries.
17. After eating, allow 1-2 hours before exercising as this will help to prevent muscle strain.
18. Injuries may result from incorrect or excessive training and using the equipment otherwise than as
directed or recommended by your doctor.
19. Care must be taken when lifting or moving the equipment so as not to injure your back. Always use
proper lifting techniques.
WARNING: Before beginning any exercise program, consult your physician. This is especially
important for individuals over the age of 35 or persons with pre-existing health problems.
Read all instructions before using any fitness equipment. We assume no responsibility for
personal injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
WW
W
W
W
W
Customer Service 1-888-707-1880
BEFORE YOU BEGIN
Thank you for choosing the Everlast Rower. We take great pride in producing this quality
product and hope it will provide many hours of quality exercise to make you feel better, look
better, and enjoy life to its fullest. It's a proven fact that a regular exercise program can improve
your physical and mental health. Too often, our busy lifestyles limit our time and opportunity to
exercise. The Everlast rower provides a convenient and simple method to begin your assault on
getting your body in shape and achieving a happier and healthier lifestyle.
For your benefit, read this manual carefully before you use the rower. If you have
questions after reading this manual, please see the front cover of this manual. To help us assist
you, note the product model number and serial number before contacting us. The model
number and the location of the serial number decal are shown on the warning label of the rower.
Before reading further, please familiarize yourself with the parts that are labelled in the drawing
below.
The decal shown above has been placed on the rower. If the decal is missing or
illegible, please call our Customer Service Department toll-free at 1-888-707-1880 to order a
replacement decal.
Handlebar
Console
Pedal
Tension Knob
Seat
Slide Rail
Rear
Stabilizer
Middle
Support
Front
Stabilizer
Customer Service 1-888-707-1880
PRE-ASSEMBLY CHECKLIST
NO.1 NO.2 NO.4
NO.3 NO.7 NO.12 NO.38
PART NO. DESCRIPTION Q’TY
1 Main Frame 1
2 Slide Rail 1
3 Front Stabilizer 1
4 Rear Stabilizer 1/1
7 Middle Support 1
12 Pedal 1
38 Seat 1
Hardware Pack 1
Manual 1
Customer Service 1-888-707-1880
HARDWARE PACKING LIST
#44 OD20*ID8.5*1.5 2PCS
Ø3&
RE-6030
STEP-1
STEP-5
#81 M8*20 2PCS
STEP-3
#52 ,' 4PCS
#55 2 ' ,' 4PCS
#81 0 4PCS
#55 2 ' ,' 4PCS
#52 ,' 4PCS
#81 0 4PCS
Ø3 &
STEP-6
ØØ3 & 6
#50 M12*160 4pcs
#34 1PC
#11 1PC
#15 1PC
#59 2PCS
#62 2PCS
# 98 S13-14-19 1PC
TOOL
# 97 S6 2PCS
#55 2 ' ,' 2PCS
STEP-4
#52 ,' 2PCS
#81 0 2PCS
STEP-2
$[LV6 FUHZ V: DVKHUV
%DOO+ HDG3LQ
#50 Long Screw
#64
Spacer
Above described parts are all the parts you need to assemble this machine. Before you
start to assemble, please check the hardware packing to make sure they are included.
Customer Service 1-888-707-1880
ASSEMBLY INSTRUCTIONS
This manual is designed to help you easily assemble, adjust and use this machine. Please read
this manual carefully for the sake of familiarizing yourself with the parts identified in the
instruction, first study the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list
for help to identify the parts.
It will take two people to assemble your unit.
ENSURE THAT ALL NUTS AND BOLTS ARE FIRMLY TIGHTENED AFTER EACH
STEP
STEP 1
1. Slide the Seat Assembly (38) onto the Seat Rail (2). Make sure that the seat faces the
hinge.
2. Use 2 M6 x 10 Button Head Screws (62) to secure the Limit Pad (34) to the Slide Rail (2).
3. Secure the Stop Brackets (11, 15) to the Seat Rail (2) using 2 ST4.0 x 16 Screws (59) to
prevent the seat from sliding off the rail.
34
62
38
2
#34 Limit pad 1pc
#62 M6*10 2pcs
#98 1pc
59
15
11
#59 ST4.0*16 2pcs
#11 1pc
#15 1pc
Customer Service 1-888-707-1880
STEP 2
1. Attach the Rear Stabilizer (4) to the Slide Rail (2). Secure using 4 Bolts (81), 4 Spring
Washers (52), and 4 Washers (55) with the provided Allen Wrench (97).
55
81
52
2
4
6 S F
#81 M8*20 4pcs
#52 ID8.5 4pcs
#55 OD16*ID8.5*1.5 4pcs
STEP 3
1. A piece of plywood has been attached to the Main Frame (1) to stabilize it during shipping.
2. Remove the 2 Bolts and 2 Washers using the Allen Wrench (97).
3. The plywood, bolts, and washers are not needed in further assembly and can be recycled.
Packing
Support
Board
6 S F
0SFV
0 : DVKHUSFV
Customer Service 1-888-707-1880
STEP 4
1. Attach the Front Stabilizer (3) to the Main Frame (1). Secure using 4 Bolts (81), 4 Spring
Washers (52), and 4 Washers (55) with the provided Allen Wrench (97).
55
81
52
31
6 S F
#81 M8*20 4pcs
#52 ID8.5 4pcs
#55 OD16*ID8.5*1.5 4pcs
STEP 5
1. Attach the Middle Support (7) to the Main Frame (1). Secure using 2 Bolts (81), 2 Spring
Washers (52), and 2 Washers (55) with the provided Allen Wrench (97).
1
55
6 S F
#81 M8*20 2pcs
#52 ID8.5 2pcs
#55 OD16*ID8.5*1.5 2pcs
7
52
81
Customer Service 1-888-707-1880
STEP 6
1. Attach the Slide Rail (2) to the Main Frame (1). Insert the Rail Shaft (46) and secure using
2 Bolts (81) and 2 Washers (44) with the provided Allen Wrench (97).
2. Insert the Ball Head Pin (65) into the lower slot on the Main Frame (1) & Slide Rail (2). Lift
center of frame to help line up locking pin holes. This locks the rower in the unfolded position
and can be removed to fold the rower up.
65
1
2
44
81
46
44
81
#81 M8*20 2pcs
6 S F
#44 OD20*ID8.5*1.5 2pcs
#46 Ø16*110 1pc
#65 Ø12 1pc
Customer Service 1-888-707-1880
STEP 7
1. Slide the Outer Hexagonal Screw (50) through the Pedal (12), then through a Pedal
Bushing (64) before attaching and securing to the Main Frame (1) using the Spanner (98).
A second Outer Hexagonal Screw (50) is directly secured onto the Main Frame (1) in the
lower half of the Pedal (12).
2. Repeat for the other Pedal (12).
64
50
50
64
1
#98 1pc
#50 M12*160 4pcs
#64 Ø18*Ø13*26 2pcs
12
12
Customer Service 1-888-707-1880
STEP 8
1. To insert/remove batteries, the Computer (95) can be removed from the Main Frame (1).
2. Pop the Computer (95) out via the hinge (shown above) and be careful not to damage the
connection wires. Unclip the wires, and the Computer (95) can be moved around freely.
Insert the 2 AA batteries to activate the Computer (95).
95
40
A
You have completed the assembly of your rower.
Your rower is equipped with adjustable end caps.
If the unit is wobbly, please turn the levelling caps on
the rear stabilizer to level the unit.
4
33
Customer Service 1-888-707-1880
PARTS LIST
No. Part No. Description Qty
1 132001 Main Frame 1
2 132002 Slide Rail 1
3 132003 Front Stabilizer 1
4 132004 Rear Stabilizer 1
5 132005 Handlebar 1
6 132006 Seat Carriage 2
7 132007 Middle Support 1
8 132008 Magnet Bracket 1
9 132009 Chain Cover L 1
10 132010 Chain Cover R 1
11 132011 Stop Brackets R 2
12 132012 Pedal 2
13 132013 Pedal Strap 2
14 132014 Crosshead Screw M5*15 1
15 132015 Stop Brackets L 2
16 132016 Adjusting U-shaped plate 2
17 132017 Belt 6PJ330 1
18 132018 Sensor Bracket 1
19 132019 6TXDUHHQGFDSƑ 1
20 132020 Oval Plug 40*80 2
21 132021 Handlebar Seat 1
22 132022 Belt Pulley 1
23 132023 Drawstring Pulley 1
24 132024 Spring Cover 1
25 132025 6RXQGSURRI%RDUG$ɎɎ 1
26 132026 6RXQGSURRI%RDUG%ɎɎ 1
27 132027 Bearing 6003 1
28 132028 Belt Wheel 1
29 132029 Bearing 6000ZZ 3
30 132030 Tension Knob 1
31 132031 Front Stabilizer End Cap L 1
32 132032 Front Stabilizer End Cap R 1
33 132033 Rear Stabilizer End Cap 2
34 132034 Limit Pad 2
35 132035 Handle End Cap 2
36 132036 )RDP*ULSɎ 2
37 132037 Meshbelt 1
38 132038 Seat 1
39 132039 Volute Spring 1
40 132040 Sensor Wire 1
41 132041 Washer OD12*ID6.5*1.5 1
42 132042 Shaft for Drawstring pulley 1
Customer Service 1-888-707-1880
No. Part No. Description Qty
43 132043 Crosshead Screw M5*35 1
44 132044 Washer OD20*ID8.5*1.5 2
45 132045 5DLO%XVKLQJɎɎ 2
46 132046 5DLO6KDIWɎ 1
47 132047 Square Plug 40*100 1
48 132048 6SDFHUIRU%HOW:KHHOɎɎ 1
49 132049 Outer Hexagonal Screw M6*55 1
50 132050 2XWHU+H[DJRQDO6FUHZ0Ɏ 4
51 132051 Adjusting Bolt M6*40 4
52 132052 Spring Washer ID8.5*1.5 10
53 132053 Bolt M6*15 4
54 132054 Nylon Nut M8 3
55 132055 Washer OD16*ID8.5*1.5 13
56 132056 %XVKLQJIRU6HDW5ROOHUɎ 3
57 132057 Aluminum Plate 2
58 132058 Nylon Nut M6 5
59 132059 Crosshead Screw ST4.0*16 4
60 132060 6PDOO3XOOH\Ɏ0 1
61 132061 Flywheel Axle 1
62 132062 Flat Head Screw M6*10 4
63 132063 Washer OD20*ID10.5*2 1
64 132064 3HGDO%XVKLQJɎɎ 2
65 132065 %DOOKHDG3LQɎ 1
66 132066 Bearing 6004 2
67 132067 Bearing 608ZZ 6
68 132068 Spacer for Seat 5ROOHUɎɎ 6
69 132069 0DJQHWɎ 1
70 132070 Bolt M8*140 2
71 132071 Bolt M8*145 1
72 132072 Washer OD11*ID5.5*1.5 1
73 132073 Bolt M6*45 1
74 132074 Flat Head Screw ST5.0*10 4
75 132075 Crosshead Screw ST4.0*19 10
76 132076 Crosshead Screw ST4.0*16 6
77 132077 Hexagon Nut M10*1.0 2
78 132078 Flange Nut M10*1.0 2
79 132079 Crosshead Screw ST4.0*25 4
80 132080 One-way Bearing HR1712 1
81 132081 Bolt M8*20 12
82 132082 C Clip 3
83 132083 Wave Washer OD13.5*ID10.2*0.4 1
84 132084 Bearing 16003 1
Customer Service 1-888-707-1880
No. Part No. Description Qty
85 132085 Wave Washer OD27.2*ID20.8*T0.4 1
86 132086 Magnetic Base 1
87 132087 Small Strong Magnetic 10*20*5 4
88 132088 Big Strong Magnetic 20*50*5 2
89 132089 Drag Spring Ø14*1.5*55 1
90 132090 Crosshead Screw ST4.0*12 1
91 132091 Bolt M6*12 4
92 132092 Nylon Nut M10 1
93 132093 Crosshead Screw M5*12 2
94 132094 Flat Head Screw M4*12 10
95 132095 Computer 1
96 132096 Flywheel 1
97 132097 Allen Wrench 2
98 132098 Spanner 1
99 132099 Seat Roller 3
DIAGRAM
49
29
29
48
82
82
85
41
58
28
5
36
36
35
35
17
29 23
26
39
25
24
42
78
78
77
82
83
80
27 84
75
77
37
43
30
72
50
12
13
13
64
64
98
S6
14
40 1
2
3
4
6
6
7
8
9
10
12
16
16
18
19
21
31
32
33
33
34
34
38
50
51
51
52
53
54
55
55
55
81
81
56
58
58
58
58
60
61
62
62
63
66
67
67
68
68
69
71
70
70
74
74
74
76
75
76
76
75
79
79
79
79
90
86
87
88
89
91
92
95
93
73
51
51
97
52
55
81
65
81
81
46
45
44
45
11
15
15
11
57
59
59
47
22
44
75
76
76
75
76
94
20
20
52
94
96
99
Customer Service 1-888-707-1880
COMPUTER INSTRUCTIONS
Functions and Operations
Batteries Installation
Please install 2 AA batteries in the battery case on the back of the Console (95).
(Whenever batteries are removed, all values will be reset to zero.)
Auto On/Off
Whenever a user starts to do exercise, the display will light up and show the workout values
automatically. After 4.5 minutes of no exercise input, the display will shut off. When a user
begins to exercise again, the workout values will continue from where they left off.
(Holding the MODE button for 2 seconds will cause all the values, except odometer, to reset
to zero.)
Auto Scan
After the Console (95) is powered on or when the Mode button is pressed, the display will
cycle through all functions values "Time - Distance - Calories - SPM - Pulse." Each value will
be held for 6 seconds.
Distance
Displays the distance from 0 to 9999 meters. In "Autoscan" mode, the value will hold for 6
seconds before continuing to the next value, users also can press the MODE button to cycle
WKURXJKWKHRWKHUYDOXHVXQWLOWKH$552:LFRQŻSRLQWVWRGLVSOD\WKHGLVWDQFHYDOXH7KLV
will end "Autoscan" mode, and only the selected value will display continuously.
Time
Displays the workout time from 00:00 to 99:59. Users can press the MODE button to cycle
WKURXJKWKHRWKHUYDOXHVXQWLODQ$552:LFRQŻSRLQWVWR"Time" to display the workout time
value.
Count
Displays the step from 0 to 9999. Users also can press the Mode button to cycle through the
RWKHUYDOXHVXQWLODQ$552:LFRQŹSRLQWVWR"Count."
Calories
Displays the calories burned during training from 0.0 to 9999. Users also can press the
MODE button to cycle through other values XQWLODQ$552:LFRQŻSRLQWVWKHFDORULHV
SPM
Displays current Strokes Per Minute from 0 to 120. Users also can press the MODE button to
F\FOHWKURXJKWKHRWKHUYDOXHVXQWLODQ$552:LFRQŻSRLQWVWRGLVSOD\"SPM."
Pulse
Displays the current heart rate in beats per minute. Users also can press the MODE button to
F\FOHWKURXJKRWKHUYDOXHVXQWLODQ$552:LFRQŹSRLQWVWRGLVSOD\"Pulse."
Reset
Hold the button for 2 seconds. All the function values, except odometer, will be reset to zero.
Note:
If the console displays abnormally, please re-install the batteries and try again. Please
properly dispose of your batteries after use.
Customer Service 1-888-707-1880
HOW TO INSTALL AND REPLACE BATTERIES
1. Open the Battery Door on the back of the monitor.
2. The monitor operates with two AA batteries; the batteries are not included. Refer to the
illustration to install or replace the batteries.
3. Do not mix a new battery with an old battery.
4. Use the same type of battery. Do not mix an alkaline battery with another type of battery.
5. Rechargeable batteries are not recommended
$$%DWWHULHV
SET UP INSTRUCTIONS
Place the Everlast rower in the area where it will be used. It is recommended that the Everlast
rower be placed on an equipment mat. The Everlast rower is approximately 80 inches long x 20
inches wide x 30 inches tall. (These dimensions may vary up to one inch.) An area 4 feet wide x
8.5 feet long is required for safe operation of the Everlast rower. Make sure that adequate
space is available for access to and passage around the Everlast rower.
2feet
8feet
FUNCTION INSPECTION:
Visually inspect the Everlast rower to verify that assembly is as shown in the illustration below.
Check the function of the Everlast rower by pulling the handlebar w/rope (5) slowly through one
complete revolution to verify that the drive train functions properly. Adjust the TENSION KNOB
(30) and verify that it functions properly.
CAUTION: Locate and read the CAUTION LABEL on Everlast rower. Make sure that all users
read the CAUTION LABEL before using the product.
Customer Service 1-888-707-1880
FUNCTION INSPECTION
Rowing: Sit on the seat (38), secure your feet in the FOOT PEDALS (12) and pull on the
HANDLEBAR(5). The seat will slide on the slide rail (2) as you pull and retract the handlebar.
5
38
2
12
12
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB (30) clockwise. To decrease the load, turn the
TENSION
KNOB (30) counterclockwise. There are eight levels for the load adjustment. Note: The load will
increase as you row faster.
30
Customer Service 1-888-707-1880
FOLDING INSTRUCTIONS
When not in use, the rower can be folded to save space.
You can fold the rower by locating the Ball Head Pin (65) on the Slide Rail (2) and removing it.
Then, take the Slide Rail (2) and move it into a vertical position.
CAUTION: The Seat (38) will glide down when the Slide Rail (2) is raised.
Also, take care to avoid the Rear Stabilizer (4) when moving the Slide Rail (2).
Once the Slide Rail (2) is in the vertical position, re-insert the Ball Head Pin (65) into its slot on
the Slide Rail (2). This locks the rower into the folded position.
CAUTION: The Slide Rail (2) will not stay in the vertical position before the Ball Head Pin (65) is
inserted. Make sure to not let go of it before it is secured, or the Slide Rail (2) may fall.
2
65
65 2
38
38
4
4
Customer Service 1-888-707-1880
USER DIRECTION
HOW TO MOVE THE ROWER
To move the machine, lift up the rear stabilizer until the transportation wheels on the front stand
touch the ground.
With the wheels on the ground, you can transport the rower to the desired location with ease.
HOW TO ADJUST THE PEDAL STRAP
To adjust the pedal strap, remove the Velcro end of the strap
from the mesh side by pulling it upward, then to the left.
Once removed, you may increase the opening of the pedal
strap by pulling the mesh end up and to the right.
To tighten, pull the Velcro end of the pedal strap upward
then to the right and down to secure it to the mesh side of the strap.
MAINTENANCE
The safety and integrity designed into the rower can only be maintained when the rower is
regularly examined for damage and wear. Special attention should be given to the following:
1. Adjust the TENSION KNOB (30) and verify that the Magnetic Brake System provides tension.
The Magnetic Brake System should provide many years of use.
2. Clean the roller tracks in the RAIL with an absorbent cloth.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and
bolts. Tighten loose nuts and bolts.
4. Verify that the CAUTION LABEL is in place and easy to read.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately, or the rower
removed from service until repair is made.
7. Only Dyaco Canada supplied components shall be used to maintain/repair the rower.
8. Keep your Everlast rower clean by wiping it off with an absorbent cloth after use.
This manual suits for next models
1
Table of contents
Other Everlast Fitness Equipment manuals
Everlast
Everlast ev-70 User manual
Everlast
Everlast EV1000 Owner's manual
Everlast
Everlast 58Kgs Home Gym Owner's manual
Everlast
Everlast 16516626 User manual
Everlast
Everlast ev-90 User manual
Everlast
Everlast 1500004 User manual
Everlast
Everlast F.I.T. X-BIKE User manual
Everlast
Everlast 612/7712 Owner's manual
Everlast
Everlast MMA4812B User manual
Everlast
Everlast 16205981000 User manual
