Exfo Fiber guardian fg-750 User manual

User Guide

Fiber Guardian

FG-750

ii FG-750

publication may be reproduced, stored in a retrieval system or transmitted

in any form, be it electronically, mechanically, or by any other means such

as photocopying, recording or otherwise, without the prior written

permission of EXFO Inc. (EXFO).

Information provided by EXFO is believed to be accurate and reliable.

However, no responsibility is assumed by EXFO for its use nor for any

infringements of patents or other rights of third parties that may result from

its use. No license is granted by implication or otherwise under any patent

rights of EXFO.

EXFO’s Commerce And Government Entities (CAGE) code under the North

Atlantic Treaty Organization (NATO) is 0L8C3.

The information contained in this publication is subject to change without

notice.

Trademarks

EXFO’s trademarks have been identified as such. However, the presence

or absence of such identification does not affect the legal status of any

trademark.

Units of Measurement

Units of measurement in this publication conform to SI standards and

practices.

Fiber Guardian iii

Patents

This product incorporates the proprietary EXFO Link-Aware™ technology,

employing spectrally-selective high-reflectance demarcation (HRD) filters

to enable the attenuation of a specific branch of a P2MP

(point-to-multipoint) network to be measured/monitored. The

Link-Aware™ technology is protected by Canadian patent no. 2,737,974, by

pending US patent application no. 13/124,455, and by corresponding

pending patent applications in Australia, China, the EC, India, Japan, and

Korea.

Version number: 5.0.0.1

iv FG-750

Microsoft End-User License Agreement

You have acquired a device ("DEVICE") that includes software licensed by EXFO Inc. (EXFO) from an affiliate of Microsoft

Corporation ("MS"). Those installed software products of MS origin, as well as associated media, printed materials, and

"online" or electronic documentation ("SOFTWARE") are protected by international intellectual property laws and treaties.

Manufacturer, MS and its suppliers (including Microsoft Corporation) own the title, copyright, and other intellectual property

be found at: http://www.microsoft.com/en-us/legal/intellectualproperty/useterms/default.aspx, by entering “Windows” as the

Product Name, and “8” as the Version Number.

This EULA is valid and grants the end-user rights ONLY if the SOFTWARE is genuine and a genuine Certificate of Authenticity

for the SOFTWARE is included. For more information on identifying whether your software is genuine, please see

http://www.microsoft.com/piracy/howtotell.

IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA"), DO NOT USE THE DEVICE OR COPY THE

SOFTWARE. INSTEAD, PROMPTLY CONTACT EXFO FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A

REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE

YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).

Software License Agreement (V.2016-02)

This Software License Agreement ("Agreement") shall apply to any Customer and its Users, for all its request for quotations

and purchase orders, EXFO order acknowledgements and invoices and any delivery of Software by EXFO, for which there is

no separate license agreement between you and the manufacturer or owner of the software, together with EXFO's Sales

Terms and Conditions, available at www.exfo.com/SalesTC or on request, which are an integral part of this Agreement.

IMPORTANT: BY ORDERING, INSTALLING, DOWNLOADING, OR USING THE SOFTWARE OR OTHERWISE PROCEEDING

WITH ANY TRANSACTION AFTER RECEIPT OF THE AGREEMENT, OR BY CLICKING ON THE ACCEPT BUTTON OR SIMILAR

BUTTON, YOU, AS THE INDIVIDUAL OR SINGLE ENTITY ACQUIRING THE SOFTWARE (THE "CUSTOMER"), OR AS THE USER

(AS HEREINAFTER DEFINED) SIGNIFY THAT YOU HAVE READ AND ACCEPTED THE TERMS AND CONDITIONS OF THIS

AGREEMENT AS OF THE DATE ON WHICH YOU FIRST ORDER THE SOFTWARE, INSTALL, DOWNLOAD, USE OR CLICK THE

ACCEPT BUTTON (THE "EFFECTIVE DATE"). IF YOU DO NOT ACCEPT THIS AGREEMENT, YOU SHOULD NOT ORDER,

INSTALL, DOWNLOAD, NOR USE THE SOFTWARE AND CONTACT EXFO FOR A REFUND, IF APPLICABLE.

Terms and Conditions

1. DEFINITIONS

1.1 "Documentation" means EXFO's online or electronic information manual or other printed materials that (i) contain

operating instructions and performance specifications for the Software and; (ii) EXFO delivers with the Software; and (iii)

EXFO generally makes available to all users of its Software.

1.2 "Open Source Software" means individual software components that are provided with the Software, for which the source

code is made generally available, and that are licensed under the terms of various published open source software license

agreements or copyright notices accompanying such software components which include without limitation any software

licenses approved as open source licenses by the Open Source Initiative or any substantially similar licenses.

1.3 "Product" means any hardware product developed by or on behalf of EXFO designed for use with the Software, as the

case may be.

1.4 "Software" means the software programs and software components in object code, source code or other format and all

modifications, updates, upgrades and enhancements that EXFO agrees to deliver or make available to Customer from time to

time.

1.5 "Third Party" means any individual, corporation, partnership, association or other entity, other than the parties to this

Agreement.

1.6 "Third Party Software" means the software programs distributed by EXFO as part of the Software which have been

developed by Third Parties or their licensors and may include Open Source Software.

1.7 "Users" means Customer's officers, employees, and independent agents and contractors, who are bound by enforceable

obligations to use the Software only on behalf of the Customer and only in accordance with this Agreement.

2. PROPRIETARY RIGHTS

2.1 The Customer acquiring a license to the Software is granted only those rights expressly conferred by the license grant set

forth in Section 3 of this Agreement. The Software is licensed, not sold. Title to the Software and the Documentation shall not

be passed to Customer, Users or to any other party. EXFO shall retain ownership of all rights, titles and interests, in and to the

intellectual property rights related to the Software and the Documentation, including but not limited to, patent, trademark,

copyrights, trade names, trade secrets, other similar rights, and intellectual property rights that could result from any

Fiber Guardian v

alterations, attachments and improvements made by either party. Title in the Third Party Software or the Open Source

Software remains with the Third Party licensors, as applicable. Customer and Users shall not, remove or modify any Software

and Documentation markings or any notices of EXFO's or its Third Party licensors' proprietary rights.

3. LICENSE GRANT

3.1 License Grant. Subject to the terms and conditions of this Agreement, EXFO grants to Customer a personal,

non-sublicensable, non-transferable and non-exclusive license to have Users install and use the Software in accordance with

the Documentation and solely within Customer's own personal or business operations, as the case may be. EXFO's license

grant is conditioned on Customer continuous compliance with all limitations and license restrictions described herein and in

the Documentation and if Customer violates any of these limitations and restrictions or any other terms of this Agreement, the

license grant will automatically and immediately terminate without notice from EXFO. Any usage of the Software outside one

of the following scopes constitutes an infringement of EXFO's and/or its Third Party licensor's intellectual property and/or

proprietary rights as well as a material breach of this Agreement.

3.1.1 Standard. The license grant of section 3.1 is granted solely to install the Software on either (i) one (1) EXFO designated

Product; (ii) one (1) stand-alone computer; or (iii) one (1) mobile device, neither of which may be connected to a network in

a manner that allows more than one (1) User to upload, access, run or generally use the Software concurrently.

3.1.2 Simulator Multi-User. In the case of Simulator Products, the license grant of section 3.1 is granted solely to use the

Software in connection with one (1) EXFO designated Simulator Product and multiple Users may upload, access, run or

generally use the Software concurrently subject to the hardware capabilities of the Simulator Product purchased by the

Customer. Notwithstanding anything to the contrary herein, Users may customize or modify the Software standard package

to meet Customer's specific needs as allowed by the script environment.

3.1.3 Server Access. For any Software that allows or grants access to a server, the license grant of section 3.1 is granted solely

for the purpose of accessing the server that enables administration of User accounts and performs services as specified in the

Documentation, such as data storage. Customer shall use the Software only with one (1) stand-alone Product or supported

device within a server-configured time period or server access enablement, and shall be responsible for the administration of

the User accounts and the Users' use of the Software. The Users may use the Software on behalf of the Customer for

Customer's business activities as described in section 3.1 above, subject to the terms of this Agreement. The Customer shall

purchase a license or subscription, as the case may be, for each User accessing the server. EXFO reserves the right to

discontinue Server Access to Customer and its Users upon non-payment of appropriate and associated maintenance or

subscription fees. Unless otherwise agreed in writing, the license grant for Server Access is limited to a period of 1 year from

the date of purchase.

3.1.4 Service Assurance Licensed Hardware. In the case of Service Assurance Products, the license grant of section 3.1 is

granted solely to use the EXFOWorx system (including where applicable other Service Assurance applications) in connection

with the maximum number of verifier agents purchased by the Customer and identified by a verifier key provided by EXFO.

3.2 Copies. Unless otherwise agreed in writing, Customer may, when applicable with the type of Software, only make one (1)

copy of the Software for backup and disaster recovery purposes provided that any copy or portion thereof must bear the

same proprietary and/or copyright notices contained in or on the original copy.

4. LICENSE RESTRICTIONS

4.1 No right is granted (i) for the use of the Software for or in the interest of any Third Party, including, but not limited to, use

for timesharing, service bureau, subscription service, hosting, outsourcing or other similar services; or (ii) to sell, transfer,

export, license or sublicense any of the Software.

4.2 Customer shall not translate or create any derivative works based on the Software or Documentation or reverse engineer,

decompile, disassemble or decode in whole or in part the Software or the Product or derive any source code or algorithms

from the Software nor modify or alter the Software, the Product or the Documentation in any other manner whatsoever.

4.3 Customer shall not copy or use the Software or Documentation for any purpose or in any manner not expressly permitted

in this Agreement.

4.4 Customer shall not remove or modify any program markings or any notice of EXFO's or its Third Party licensors'

proprietary rights.

4.5 The validity of this Agreement is subject to the payment of all applicable license or maintenance fees by Customer to

EXFO as the case may be and as indicated in the applicable EXFO invoice, if any.

4.6 The Third Party Software provided to Customer is distributed under the terms of the license agreements associated with

that Third Party Software. Copies of these terms are included in the Documentation otherwise this Agreement shall govern

the use of any Third Party Software by Customer. EXFO may designate any Third Party licensors as a third party beneficiary of

this Agreement (the "Third Party Beneficiary") solely with regards to the distribution of such Third Party Software but this

Agreement shall not be enforceable by the Third Party Beneficiary without a prior written agreement duly executed with

EXFO. NOTWITHSTANDING ANYTHING ELSE TO THE CONTRARY IN THIS AGREEMENT, EXFO EXPRESSLY DISCLAIMS ANY

WARRANTY, RESPONSIBILITY OR LIABILITY WITH REGARD TO THE THIRD PARTY SOFTWARE, INCLUDING THE

DOWNLOADING AND INSTALLATION, IF APPLICABLE.

vi FG-750

4.7 Software may contain Open Source Software. Open Source Software is composed of a variety of individual software

components, each of which has its own copyright and its own applicable license conditions. Customer must review the

licenses within the individual packages to understand its rights under them. The licenses can be found in each Software

and/or the Documentation. NOTWITHSTANDING ANYTHING ELSE TO THE CONTRARY IN THIS AGREEMENT, EXFO

EXPRESSLY DISCLAIMS ANY WARRANTY, RESPONSIBILITY OR LIABILITY WITH REGARD TO OPEN SOURCE SOFTWARE.

4.8 The Software may use Google Analytics, an analytics service provided by Google, Inc. ("Google") or any other similar

analytics services. Anonymous information may be collected about Customer's use of the Software and such information will

be transmitted to and stored on Google or third party servers. This information will be used for the purpose of compiling

reports on the Software's activity. This information may also be transferred to other parties where required to do so by law, or

where such parties process the information collected by the analytics services.

5. RESERVED RIGHTS

5.1 Title in the Software remains with EXFO. Title in the Third Party Software and Open Source Software remains with the

Third Party providers.

5.2 EXFO reserves any rights not expressly granted in Section 3 and nothing in this Agreement constitutes a waiver of EXFO's

rights under copyright laws or any other federal or state law or treaty. Without limiting the foregoing, EXFO reserves the right

to license the Software to others on such terms as EXFO may establish in its sole discretion.

5.3 EXFO reserves the right, in any way and without notice, to revise, not to revise, update or modify the Software, or the

information upon which the Software was based. Except as otherwise expressly set forth in this Agreement, EXFO assumes

no responsibility, for (i) protecting the Software against obsolescence; (ii) providing any improvements to the Software; (iii)

maintaining the Software; or (iv) providing other services with respect to the Software.

Fiber Guardian vii

6. COOKIE AND PRIVACY POLICY

If the use of the Software allows connection to an EXFO Server, Customer and Users consent to EXFO's collection, use and

disclosure of information associated with the Software solely in accordance with EXFO's Cookie and Privacy Policy, currently

available at http://www.exfo.com/en/Cookie-and-Privacy-Policy/, as it may be updated by EXFO from time to time.

7. AUDIT

When applicable, EXFO reserves its right to verify, upon reasonable notice, Customer's use of the Software in compliance

with the terms of this Agreement and audit all books and financial records related to such use. Customer agrees to pay within

30 days of written notification any underpaid fees. If the Customer does not pay, EXFO can end Customer's support, licenses

and this Agreement. EXFO shall have the right to disclose the result of such audit to its Third Party Software licensors to the

extent that such audit results in findings concerning such Third Party Software licensor.

8. SUPPORT

EXFO shall only provide support for the Software to the extent set forth in a separate maintenance agreement or support

program, if any, between EXFO and Customer.

9. CONFIDENTIAL INFORMATION

9.1 Customer shall hold the Software and the Documentation in strict confidence for the benefit of EXFO as confidential

information.

9.2 Customer shall not make any disclosure of the Software (including methods or concepts utilized in the Software) to

anyone other than its Users who have a need to know provided that Customer shall be responsible for the use of the Software

by its Users. Customer shall notify its Users of their confidentiality obligations with respect to the Software and the

Documentation and shall require its Users to comply with these obligations. The confidentiality obligations of Customer and

its Users shall survive the termination of Customer's licenses and rights granted under this Agreement.

9.3 Customer shall not disclose results of any Software or Product benchmark tests without EXFO's prior written consent.

9.4 EXFO shall have the right to disclose, without Customer's consent, the terms of this Agreement to EXFO's Third Party

Software licensors.

10. LIMITED WARRANTY AND EXCLUSIVE REMEDY

EXFO warrants that for a period of sixty (60) days from the date of delivery ("Warranty Period"), that the Software will operate

and perform materially in conformance with the Documentation. If a breach of the warranty set forth in this Section 10

occurs, Customer's sole and exclusive remedy is that EXFO will provide reasonable efforts to correct non-conformances

which are reproducible by EXFO during the Warranty Period. If the use of the Software allows connection to an EXFO Server,

during any subscription term, EXFO will use commercially reasonable efforts to make the EXFO server generally available

except for planned downtime or downtime caused by circumstances beyond EXFO's reasonable control.

11. DISCLAIMER

EXFO makes no representations and extends no warranties of any kind (other than those set forth in Section 10) with respect

to (i) the use, sufficiency or accuracy of the Software; (ii) the sufficiency or accuracy of the reports or tests performed utilizing

the Software; (iii) any Third Party Software and Open Source Software; (iv) any Third Party websites or links (including

hyperlinks) thereto; or (v) the availability of the Software, the EXFO server or that the Software or the EXFO server

performance will perform error-free and uninterrupted. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE

FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE (EVEN IF

EXFO KNOWS OR HAS BEEN MADE AWARE OF SUCH PURPOSE), AND THE WARRANTY AGAINST INFRINGEMENT OF

PATENTS OR OTHER INTELLECTUAL PROPERTY RIGHTS. THE SOFTWARE IS NOT FAULT-TOLERANT AND IS NOT DESIGNED,

MANUFACTURED, OR INTENDED FOR USE IN HAZARDOUS ENVIRONMENTS THAT REQUIRE FAILS-SAFE PERFORMANCE

SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATIONS SYSTEMS, AIR

TRAFFIC CONTROL, EMERGENCY RESPONSE, TERRORISM PREVENTION OR RESPONSE, LIFE SUPPORT OR WEAPONS

SYSTEMS ("HIGH RISK ACTIVITIES") THE FAILURE OF WHICH COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE

PHYSICAL OR ENVIRONMENTAL DAMAGE. EXFO EXPRESSLY DISCLAIMS ANY WARRANTY OF FITNESS FOR HIGH RISKS

ACTIVITIES.

viii FG-750

12. LIMITATION OF LIABILITY

EXFO IS NOT LIABLE FOR ANY INDIRECT DAMAGES, LOST PROFITS, INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING

OUT OF THIS AGREEMENT OR THE FURNISHING OF THE SOFTWARE OR THIRD PARTY SOFTWARE, WEBSITES OR LINKS

(INCLUDING HYPERLINKS) THERETO, INCLUDING THE USE OR INABILITY TO USE THE SOFTWARE OR THE THIRD PARTY

SOFTWARE, WEBSITES OR LINKS (INCLUDING HYPERLINKS) THERETO, EVEN IF EXFO KNOWS OR HAS BEEN MADE

AWARE OF THE POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES. EXFO IS NOT RESPONSIBLE FOR ANY COMPENSATION,

REIMBURSEMENT, OR DAMAGES ARISING IN CONNECTION WITH: USERS INABILITY TO USE THE SOFTWARE AS A RESULT

OF ANY UNANTICIPATED OR UNSCHEDULED DOWNTIME OF ALL OR A PORTION OF THE EXFO SERVER FOR ANY REASON,

INCLUDING AS A RESULT OF POWER OUTAGES, SYSTEM FAILURES OR OTHER INTERRUPTIONS. EXFO'S LIABILITY UNDER

THIS AGREEMENT, IF ANY, IS LIMITED TO I) THE ANNUAL LICENSE FEES FOR SUBSCRIPTION LICENSE OR (II) THE TOTAL

LICENSE FEES ACTUALLY RECEIVED BY EXFO FOR THE SOFTWARE. IF ANY REMEDY HEREUNDER IS DETERMINED TO HAVE

FAILED OF ITS ESSENTIAL PURPOSE, ALL LIMITATIONS OF LIABILITY, DISCLAIMERS AND EXCLUSIONS OF WARRANTY AND

DAMAGES SET FORTH IN THIS AGREEMENT SHALL REMAIN IN EFFECT.

13. TERM AND TERMINATION

13.1 The term of this Agreement will commence on the Effective Date and will remain in effect until expiration of Customer's

subscription licenses, if applicable, or until termination in accordance with Section 13.2.

13.2 This Agreement and the license and rights granted to Customer under this Agreement will automatically terminate

without notice to Customer if (i) Customer assigns the license for the benefit of creditors; (ii) Customer admits in writing its

inability to pay debts as they mature; (iii) a trustee or receiver is appointed for a substantial part of Customer's assets; (iv) a

bankruptcy proceeding is instituted against Customer which is acquiesced in and is not dismissed within sixty (60) days, or

results in an adjudication of bankruptcy; or (v) Customer breaches the license granted in Section 3 or breaches any of the

restrictions of Section 4.

13.3 Without prejudice to any other rights, EXFO may terminate this Agreement if Customer fails to comply with any term or

condition of this Agreement.

13.4 Upon termination of this Agreement, Customer shall return the Software and the Documentation, including all copies

and, if requested, certify in writing to EXFO the return. Customer is bound by all obligations incurred prior to the termination;

however, all of EXFO's obligations will automatically terminate upon termination. EXFO is under no obligation to refund any

monies because of termination. These termination rights are in addition to all other rights and remedies available to EXFO.

14. GENERAL

14.1 Neither the execution of this Agreement or anything in it, or the Software, shall be construed as providing nor implying

any arrangement or understanding that EXFO will make any purchase, lease, examination or test of, or give any approval with

respect to, any product or service.

14.2 Customer may not assign, in whole or in part, this Agreement, or any license, rights or obligations granted, to any Third

Party, including without limitation, any subsidiary, affiliate or entity owned or controlled by Customer, or pursuant to any

merger, consolidation or other Customer reorganization, without the prior written consent of EXFO.

14.3 The failure of either party at any time to enforce any of the provisions of this Agreement or any right under this

Agreement, or to exercise any option provided, will in no way be construed to be a waiver of the provisions, rights, or options,

or in any way to affect the validity of this Agreement. The failure of either party to exercise any rights or options under the

terms or conditions of this Agreement shall not preclude or prejudice the exercising of the same or any other right or option

under this Agreement.

14.4 This Agreement must be construed and enforced according to the laws applicable in the province of Quebec, Canada,

without regards to its conflict of laws provisions. The parties specifically exclude the application of the United Nations

Convention on Contracts for the International Sale of Goods and the Uniform Computer Information Transactions Act.

14.5 If any provision or portion of a provision of this Agreement is held invalid or unenforceable, the remainder of the

Agreement shall not be affected, and the remaining terms will continue in effect and be binding on the parties, provided that

such holding of invalidity or unenforceability does not materially affect the essence of the Agreement.

14.6 EXFO and Customer agree to comply with all applicable laws. Specifically, Customer will comply with all applicable

export and import control laws and regulations of the United States and any foreign jurisdiction in which the Software is used

and, in particular, Customer will not export or re-export the Software without all required United States and foreign

government licenses. Customer acknowledges and understands that the Software contains encryption technology that may

require an export license from the U.S. State Department when exported or re-exported to government end-users, Internet or

telecommunications service providers providing services specific to government end-users. Export of the Software to certain

countries is prohibited. Customer will defend, indemnify, and hold harmless EXFO from and against any violation of such

laws or regulations by Customer or any of its agents, officers, directors, or employees.

14.7 The provisions of this Agreement constitute the entire agreement between the parties with respect to the licensing of the

Software and supersede (i) all prior agreements, oral or written; (ii) any conflicting terms in Customer's purchase order or

EXFO's invoice; and (iii) all other communications relating thereto. All Sections that by their sense and context are intended

to survive the execution, delivery, performance and termination of this Agreement, will survive and continue in effect.

Fiber Guardian ix

14.8 Any references to information contained in an URL form an integral part of this Agreement and the Customer hereby

confirms that it has access to the Internet and confirms that prior to entering into this Agreement has read and agrees with

the terms and conditions set out in those documents.

14.9 U.S. GOVERNMENT END USERS. The Software and any other software covered under this Agreement is a "commercial

item" as that term is defined at 48 C.F.R. 2.101, consisting of "commercial computer software" and "commercial computer

software documentation" as such terms are used in 48 C.F.R. 12.212. Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1

through 227.7202-4, all U.S. Government End User Customers acquire the Software with only those rights set forth therein.

END OF TERMS AND CONDITIONS

CONTACT INFORMATION: If you have any questions about this Agreement, please direct all correspondence to: EXFO Inc.,

400 Godin Avenue, Quebec City, Quebec, G1M 2K2, Canada. Legal notice shall be sent to the attention of the EXFO Legal

Department.

Third Party and Open Source License Notice

This product may include software developed by the following people and organizations with the following copyright notices:

the Contributors.

KeyCloak (http://www.keycloak.org).

All other trademarks or service marks are the property of their respective owners.

Any third party software provided to you is distributed under the terms of the license agreements associated with that third

party software. Where applicable, copies of the terms are included elsewhere in the documentation for this product.

The source code for some of these components is available upon request for three years from the date of your receipt of the

product. Please submit requests to:

EXFO inc.

400, avenue Godin

Québec (Québec)

G1M 2K2 Canada

Attn: Source Code Support

Please be sure to include your mailing address and a check of CAD $35 to cover the cost of distribution.

Oracle Java Commercial Features Notice

Use of the Commercial Features for any commercial or production purpose requires a separate license from Oracle.

“Commercial Features” means those features identified Table 1-1 (Commercial Features In Java SE Product Editions) of the

Java SE documentation accessible at http://www.oracle.com/technetwork/java/javase/documentation/index.html

xFG-750

Contents

Copyright Information ............................................................................................................ii

Certification Information ..................................................................................................... xiv

1 Introducing the FG-750 Fiber Guardian .......................................................1

Main Features .........................................................................................................................3

Available Models ....................................................................................................................4

Available Optical Switch Cassette Configurations ...................................................................9

Power Sources ......................................................................................................................13

Supported Web Browsers .....................................................................................................13

Developing Your Own Test Applications ................................................................................14

Conventions ..........................................................................................................................15

2 Safety Information .....................................................................................17

General Safety Information ...................................................................................................17

Laser Safety Information (Units with an OTDR) .....................................................................19

Electrical Safety Information .................................................................................................21

3 Getting Started with Your Fiber Guardian ................................................25

Preventing Electrostatic Discharge Damage ..........................................................................25

Preparing for Installation ......................................................................................................26

Installing Your Unit in a Rack ................................................................................................27

Grounding Your Unit ............................................................................................................30

Inserting or Removing Optical Switch Cassettes (FG-750EX Models Only) ............................32

Working with the Fiber (Patchcord) Management Tray .........................................................37

Connecting the Power and the Network Cables ....................................................................46

Turning On or Off the Unit ....................................................................................................49

Connecting a Monitoring Device to the Dry Contact Relays ..................................................51

Connecting an External Switch .............................................................................................53

Retrieving the IP Address of the Rear Ethernet Port (Host) ....................................................56

Preparing Your Unit for 3G/4G Access ...................................................................................60

Operating the RTU through SMS ..........................................................................................66

Preparing to Access Your Unit via a WAN or the Internet ......................................................68

Connecting to the VPN .........................................................................................................78

Cleaning and Connecting Optical Fibers ...............................................................................81

Working with the REST Commands (Certain Models Only) ...................................................83

Installing the Notification Agent on Your Computer .............................................................84

Understanding the Applications, User Accounts and Passwords ...........................................86

Fiber Guardian xi

4 User Management ...................................................................................... 91

Introduction .........................................................................................................................91

Logging in to the Administration Console ............................................................................91

Realm Settings ......................................................................................................................93

Roles .....................................................................................................................................93

Managing Users ....................................................................................................................94

Managing Groups ...............................................................................................................104

User Federation ...................................................................................................................105

5 Using the Host Web User Interface ......................................................... 109

Accessing and Exiting the Host Web UI ...............................................................................109

Viewing Host and Companion Information ........................................................................112

Configuring Network Settings ............................................................................................113

Configuring the 3G/4G Settings ..........................................................................................116

Connecting as an NQMSfiber EMS Client (OTDR Mode Only) ..............................................118

Configuring the E-Mail Server Settings ...............................................................................120

Configuring SNMP ..............................................................................................................121

Configuring the Time Server Settings ..................................................................................124

Modifying the Passwords ....................................................................................................125

6 Setting Up Your RTU ................................................................................. 127

Detecting the Fibers Connected to the Optical Ports ..........................................................127

Changing a Cassette ...........................................................................................................131

Configuring a Remote Switch (ROTAU) ...............................................................................133

ROTAU Status .....................................................................................................................138

Configuring Alerts ..............................................................................................................141

Managing Alert Types .........................................................................................................142

Managing System Setting Values ........................................................................................148

Editing Test On Demand Default Parameters ......................................................................158

7 Operating Your RTU in OTDR Measuring Mode ....................................... 159

Managing Optical Routes ...................................................................................................159

Managing Test Setups .........................................................................................................167

Managing Test Programs ....................................................................................................177

Managing Threshold Sets ...................................................................................................181

Performing an Ad Hoc Test .................................................................................................185

Performing a Test ................................................................................................................192

Managing Degraded Fibers .................................................................................................194

Viewing Current and Scheduled Jobs ..................................................................................200

Configuring the Notification Agent ....................................................................................201

Managing Cable Templates .................................................................................................206

xii FG-750

8 Analyzing Results ......................................................................................217

Viewing the Current Fault List .............................................................................................217

Searching and Displaying OTDR Results ..............................................................................224

Search Results for Test On Demand ....................................................................................228

9 Using the Line Configuration Web User Interface ..................................233

Accessing the Line Configuration Web UI ...........................................................................233

Managing Remote OTAUs ...................................................................................................237

Managing Ports and Lines ..................................................................................................242

Performing an Injection Loss Test ........................................................................................246

Managing Configurations ...................................................................................................248

10 Working With the Event Log ....................................................................251

Viewing the Event Log ........................................................................................................251

Customizing the Log View ..................................................................................................252

Applying and Clearing Filters ..............................................................................................253

Exporting Log Reports ........................................................................................................255

11 Maintenance ..............................................................................................257

Cleaning Switchable Connectors .........................................................................................258

Cleaning EUI Connectors ....................................................................................................260

Cleaning Other Types of Connectors ...................................................................................263

Replacing the Air Filter ........................................................................................................264

Replacing the Fan ...............................................................................................................268

Replacing the Power Supply Modules .................................................................................276

Replacing the OTDR ............................................................................................................280

Replacing an RTU or Changing the SSD (managed by EMS) ................................................284

Backing Up the Database ....................................................................................................288

Viewing the Installed Applications ......................................................................................290

Viewing the Firmware Version of the Companion ...............................................................291

Managing Applications (Software Packages) ......................................................................292

Recalibrating the Unit .........................................................................................................299

Recycling and Disposal .......................................................................................................300

Fiber Guardian xiii

12 Troubleshooting ....................................................................................... 301

Solving Common Problems .................................................................................................301

LED Indicators Description ..................................................................................................304

Viewing System Status ........................................................................................................308

Testing the Status of the Relays ..........................................................................................309

Refreshing the Status of the LEDs .......................................................................................311

Connecting to Your Unit Using the KMV Remote Console ..................................................313

Resetting Configuration (Parameters) .................................................................................317

Restoring Your Unit to Normal Operation ...........................................................................318

Viewing Online Documentation ..........................................................................................322

Viewing EXFO Contact Information ....................................................................................323

Contacting the Technical Support Group ............................................................................323

Transportation ....................................................................................................................324

13 Warranty ................................................................................................... 325

General Information ...........................................................................................................325

Liability ...............................................................................................................................326

Exclusions ...........................................................................................................................327

Certification ........................................................................................................................327

Service and Repairs .............................................................................................................328

EXFO Service Centers Worldwide ........................................................................................329

A Technical Specifications ........................................................................... 331

Certification Information

xiv FG-750

Certification Information

North America Regulatory Statement

This unit was certified by an agency approved in both Canada and the

United States of America. It has been evaluated according to applicable

North American approved standards for product safety for use in Canada

and the United States.

Electronic test and measurement equipment is exempt from FCC part 15,

subpart B compliance in the United States of America and from ICES-003

compliance in Canada. However, EXFO Inc. makes reasonable efforts to

ensure compliance to the applicable standards.

The limits set by these standards are designed to provide reasonable

protection against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance

with the user guide, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

Modifications not expressly approved by the manufacturer could void the

user's authority to operate the equipment.

If you purchased the 3G/4G option, your unit comes with an internal

wireless modem and an external antenna.

To comply with the regulations regarding radio frequency (human

exposition to radiation and maximum output power), you must ensure that

all people remain at a distance of at least 20 cm (8 in) from the antenna

when the unit is working.

Fiber Guardian 1

1 Introducing the FG-750 Fiber

Guardian

The FG-750 Fiber Guardian is a multiple-port OTDR aimed at remote testing

and continuous monitoring of lit/unlit optical fibers. The equipment can be

used as a stand-alone unit or as an RTU (remote test unit), part of a

centralized management system like EXFO NQMSfiber. An RTU contains an

OTDR (optical time domain reflectometer) and an optical switch that

allows the instrument to test and monitor multiple fibers from the same

instrument. Should you use it as stand-alone equipment or part of a

centralized management system, this user guide will guide you through the

equipment setup, configuration, operation, trouble-shooting, and

maintenance.

In case you intend to or currently operate your FG-750 as part of an

NQMSfiber system (centrally managed), Chapters 6 and 7 of this guide

present functions centrally available from the EMS (Element Management

System) Web User Interface, such as result viewing and creation/edition of

test setups. Should you want to operate the unit as an autonomous RFTS

(OTDR-based) unit, then all of this user guide is relevant in you becoming

familiar with the how-to-use Fiber Guardian in a stand-alone installation,

including how to setup e-mail and/or SMS alerts, and optional

3G/4G wireless interface, etc.

The user guide also addresses a specialized usage of Fiber Guardian that is

a fixed, remotely controlled, multi-port iOLM test equipment. This

operation mode is available for example with a Node OTDR

(OTM-700-Node) module.

Note: If you purchased an FG-750ST/EX-Node iOLM and want to operate it as an

iOLM product, you will first need to perform the mode switching explained

in choosing an application on page 111, before operating the equipment.

By default, factory sets the operation mode to OTDR.

Introducing the FG-750 Fiber Guardian

2FG-750

In OTDR mode, you can run basic functions such as triggering a

manual OTDR test (ad-hoc), enabling standard fiber monitoring, and

creating a cable template test campaign that allows for scheduled

testing of one or multiple fibers, part of the same cable span for short

or long periods of time.

In iOLM mode with a Node OTDR (OTM-700-Node), you can use the

equipment as an intelligent Link-Aware™ probe and run your own tests

through an API (REST services), fully documented and available

standard with the product. With a Node iOLM Fiber Guardian, you can

test through PON splitters with the help of HRD (high-reflectance

demarkation) filters that provide the discrimination required to

measure and monitor attenuation of a specific branch of a P2MP

(point-to-multipoint) line.

Various applications are possible using Node iOLM (OTM-700-Node in

iOLM mode):

24/7 surveillance of dark (no traffic) or lit (with traffic) optical fibers

On-demand troubleshooting of P2P (point-to-point) and P2MP fiber

lines

Attenuation testing with HRD (termination filters) mainly in PON

(passive optical network)

Pass-fail testing on the transport fiber at time of installation

Certification testing up to the customer port or drop terminal port

Preventive maintenance testing and detection/localization of water

intrusion or other slow varying phenomenon.

Introducing the FG-750 Fiber Guardian

Fiber Guardian 3

Main Features

Your unit includes the following:

Stand-alone capabilities scalable to a centralized server application if

required

A main CPU (host), and a BMC (baseboard management controller) as

a secondary controller unit (companion)

OTDR measurement, fault finding, test scheduling, local storage, and

event forwarding to external system or synchronization with

centralized server application like EXFO NQMSfiber

Optional built-in (first stage) or cassette switches (second stage)

Possibility to connect external switches (remote OTAUs) for second

and third stage switching capability

Two USB 2.0 ports (host)

Two Ethernet ports - local access and LAN/WAN connection

Optional integrated communication module and external antenna for

3G/4G access (to take over automatically when the wired network is

down, or to be used as primary network)

Installation in a rack (rack mounting brackets, front drawer for access

to key parts and modules, and optional fiber management tray)

Optional TAM (test access module) kits to couple transmit/receive OLT

(optical line termination) port and test port to the line under test

Optional patch panels to switch from multifiber cabling to single-fiber

cabling without the WDMs (wavelength division multiplexers)

Access to configure settings via the Fiber Guardian Host Web UI

Ability to create a logical line based on the port numbers used, giving

them a unique name or ID through the Line Configuration Web UI

Open and fully documented API (REST interface) that enables you to

develop your own system-level network test and management solution

Introducing the FG-750 Fiber Guardian

4FG-750

Available Models

Can be managed from EMS (Element Management System)

Fiber management tray (optional) that can be mounted on FG-750

front to better manage large quantity and/or extra length of jumper

cables.

Available Models

To better suit your testing needs, the following models are available:

Single-port Fiber Guardian without an optical switch inside the unit

(built-in or cassette type). Model: FG-750ST-XXXX-01 (ST:standard).

Multiple-port Fiber Guardian with a built-in optical switch inside the

unit. Model: FG-750ST-XXXX-N (N=4, 8, 12, 24, 32).

Expandable multiple-port Fiber Guardian with optical switch cassettes

that can be added/removed from an 8-port basic configuration.

Model: FG-750EX.

Introducing the FG-750 Fiber Guardian

Fiber Guardian 5

Available Models

Fiber Guardian without Switch Ports

FG-750ST single port model: FG-750ST-XXXX-01

Banana plug connector for antistatic strap

USB host ports

Ethernet local access port

(to connect a portable computer to the unit)

Retaining screws/handles to slide the unit in

or out of its case (OTDR replacement)

Retaining screws/handles to access the fan and air filter

OTDR port

On/Off button

LEDs

Mounting brackets for installation in a rack

(not assembled on the unit at time of shipment)

Front

To install the optional fiber management tray

Introducing the FG-750 Fiber Guardian

6FG-750

Available Models

Replaceable power supply modules

(AC model shown)

Port for 3G/4G antenna

Ethernet port

(for LAN/WAN connection)

Dry contact relays

Grounding lug

Back

Other manuals for Fiber Guardian FG-750

Table of contents

Popular Test Equipment manuals by other brands

Megger

Megger DET3TA user guide

Danfoss

Danfoss iSave 50 operating guide

Tektronix

Tektronix TDS2012 user guide

MULTI MEASURING INSTRUMENTS

MULTI MEASURING INSTRUMENTS 240+ instruction manual

Aquila

Aquila RE80 Original instruction manual

Proceq

Proceq PAROTESTER 2 operating instructions

Hirel

Hirel HH972 operating manual

Oakton

Oakton CTSTestr 5 operating manual

Elcometer

Elcometer 1720 operating instructions

ED&D

ED&D LT-952HC user manual

TestPad

TestPad BTS-2002H manual

LeCroy

LeCroy 4300B Operator's manual

Shimpo

Shimpo ST-329BL Operation manual

Tektronix

Tektronix 5000 Series manual

Netscout

Netscout aircheck G2 user manual

Ocean Safety

Ocean Safety Jon Buoy mk4 operating instructions

SIGLENT

SIGLENT SDS2354X HD quick start

Fluke

Fluke AIRCHECK user manual

EXFO Fiber Guardian FG-750 User manual

Popular Test Equipment manuals by other brands