5
Product Operation
1. Charging the Battery
1) To charge the SailFish, plug in the USB end to any power source with USB port such as power adapter or
computer
2) Plug the micro USB end of the cable into the charging port on your Sailfish.
3) LED indicator will display red light while charging, and will shut off when charging is complete
2. Turning On/Off the headset
To turn on SailFish, press sw1 for 3 seconds and you will hear “Power On”. To turn off the headset, press sw1
for 6 seconds and you will hear “Power Off”
3. Pairing the Headset with Smartphones, Tablets, or other Bluetooth™ devices
1) Before pairing, please make sure the SailFish is turned off and the Bluetooth™ function of the device that you
wish to pair is activated.
2) Headset: To pair, press sw1 for 6 seconds to activate the pairing mode of the headset. LED indicator on
the headset will blink blue and green light alternately to indicate the pairing mode
3) On the device, search and select “EXSOUND SailFish” in the available devices list.
4) Headset: Once the headset is paired, you will hear “pairing completed” and LED indicator will then remain blue
light
** If the same device has ever been paired with the headset before, just press sw1 for 2 seconds to turn on
the power then the headset will pair with the device automatically
4. Adjusting the Volume
To change the volume of the music or call, turn up to increase the volume, and turn down to decrease
5. Listening To Music
1) Turn on any application or software that you wish to play the music on your Smartphone/Tablet/Laptop
2) Headset: Press SW2 Button to play music. Press SW2 Button again to pause.
3) Headset: Turn Up SW1 once to select next song. Turn down SW1 once to select previous song.
6. Call Handling
1) To answer a call with the headset : Press SW1 once when you hear an incoming call
2) To end a call : During an ongoing call, press SW1 once to hang up
3) To reject a call: Press SW1 for 2 Seconds when you hear an incoming call
7. Choose Language
1) To enter language selection mode, press SW3 for 3 seconds.
2) Turn SW1 Up /Down to select language.
3) Press
SW1 to select the desire language
