FabiaTech FP8080 Series User manual

Version 2.0 FP8080 Series User’s Quick Reference Page 1/3
www.fabiatech.com ©2009-2011 FabiaTech Corporation
1. Brief
The FP8080x is an 8-inch Panel PC with touch screen device (FP8080xT). This user’s quick reference
provides its outlook information and I/O outlets description.
2. Dimensions (in mm) and Rear I/O Information
220
Cut out dimension 222 x 151 mm
132.2
149
15
EAR-PHONE
/
250
180
DC IN
POWER BUTTON
DC12~24V
+ -
CRT KB/MOUSE
RESET COM
60
52
43.5
LAN USB
MIC
CFHDD
USB
HDD&CF
Antenna
ANTENNA
3. Packing List
1 FP8080x/FP8080xT industrial Panel PC.
1 AC to DC19V power adapter and 1 AC power code cable.
1 pack of embedded mounting kit with 4 screws.
1 pack of wall mounting kit with 5 fixed screws. (FP8080K1, optional)
1 pack of Din-rail mounting kit with 11 fixed screws. (FP8080K2, optional)
1 pack of 2.5” SATA HDD installing kit with 4 screws.
1 touch pen for touch screen (Optional for FP8080T only)
1 Compact Disc including user’s manual and touch screen drivers.
4. Features
* Processor Board
Intel low power Celeron-M processor with 1GB DDR2 RAM. (2GB Max.)
* I/O Outlets
One 10/100/1000 base-TX Ethernet port.
4 USB ports (V2.0) and 1 RS-232/485 serial port.
1 VGA (CRT) and 1 PS/2 compatible keyboard/mouse interface.
2 Audio connectors for Earphone and Microphone.
1 mini-PCI socket for mini-PCI I/O modules, especially for WLAN modules.
1 DC-In plug connector and 1 terminal block for DC power input.
1 power button and 1 reset button.
* Storage Bay
1 CompactFlash socket for CompactFlash modules or MicroDrives.
One 2.5" SATA hard disk space.
* Power requirement
+12 ~ +24V DC, 1.73A maximum (1.03A typical) with 19V input voltage.
* Mechanical
Dimensions: 60mm(D) x 250mm(W) x 180mm(H)
Weight: 3.3Kg.(Standard packing)
Approval: IP65 Compliant.
5. I/O outlets and LED Indicator
A. Power Connectors
DC +12V to +24V, 42W minimum
DC12~24V
Terminal Block DC Plug-In Connector

Version 2.0 FP8080 Series User’s Quick Reference Page 2/3
www.fabiatech.com ©2009-2011 FabiaTech Corporation
B. VGA, Serial port, Keyboard/Mouse, LAN, Audio, and USB Connectors
6. Installation
A. Installing CompactFlash and 2.5” Hard Disk
B. Installing DDR2 Modules and mini PCI WLAN Modules
C. Embedded Mounting and Mounting Dimensions
Keyboard
(
& Mouse
)
COM1 LAN
Note 1: Standard PS/2 keyboard can be plugged into this connector without any
adapter cable. If PS/2 keyboard and mouse will be used simultaneously,
an optional Y-type adapter cable is needed.
Note 2: The LAN port is a RJ45 connector with 2 LEDs. The orange LED
indicates data is accessing and the green LED indicates on-line status.
(When lighted indicates on-line and off indicates off-line)
VGA
(
D-sub 15
)
Earphone
(Line-Out) Mic-In USB #1, #2
USB #3, #4
On the right side
of FP8080x
Cut out dimension 222 x 151 mm
WALL
Step 1 Step 2
WALL
CFHDD
USB
HDD&CF
Antenna
ANTENNA
Step 2: Open the HDD/CF
Cover. (1 screw)
Ste
p
1: Install 2.5” HDD into the HDD kit.
Step 3: Install HDD into the HDD dock.
Step 4: Install CF into the CF socket.
Step 5: Close the HDD/CF cover and
fasten the screw.
Step 2-2:
Install Wireless Module
and Antenna
Step 2-1:
Install DDR2 Module
Step 1: Separate the Panel
from housing (8 screws)

Version 2.0 FP8080 Series User’s Quick Reference Page 3/3
www.fabiatech.com ©2009-2011 FabiaTech Corporation
D. Wall Mounting and Mounting Dimensions
E. Din-Rail Mounting and Mounting Dimensions
End of Document
133.4
75
100
75
50 50
45(REF)
31(REF)
100
75 67
13.8(REF)
8
R2.75
R5
81(REF)
for h=15
18(REF)
35
27
7.5
On 35mm
(EN 50022:1977)
Din-Rails
27
35
15
for h=7.5
10.5(REF)
67
Rail Adapter
110
Note: FP8080K2 includes 2 Din-Rail clips,
screws, and all components of
FP8080K1.
Mounting Option 2:
3 mounting holes
Mounting Option 1:
VESA 75/100mm Standard FP8080K1 (optional)
FP8080K2 (optional)
35mm Din-Rail