FabiaTech FX5633 User manual

FabiaTech Corporation
IPC Solution
Website: http://www.fabiatech.com
Email: [e-mail]
Small Cube System
Fanless Series
FX5633 User’ Manual
AUG 2011
Version: 1.1
Part Number: FX5633

ii
Copyright
©Copyright 2009 FabiaTech Corporation, The content of this publication may not
be reproduced in any part or as a whole, transcribed, stored in a retrieval system,
translated into any language, or transcribed in any form or by any means,
electronic, mechanical, and magnetic… or otherwise without the prior written
permission of FabiaTech Corporation.
Disclaimer
FabiaTech makes no representation of warranties with respect to the contents of
this publication. In an effort to continuously improve the product and add features,
FabiaTech reserves the right to revise the publication or change specifications
contained in it from time to time without prior notice of any kind from time to time.
FabiaTech shall not be reliable for technical or editorial errors or omissions, which
may occur in this document. FabiaTech shall not be reliable for any indirect,
special, incidental or consequential damages resulting from the furnishing,
performance, or use of this document.
Trademarks
Trademarks, brand names and products names mentioned in this publication are
used for identification purpose only and are the properties of their respective
owners.
Technical Support
If you have problems or difficulties in using the system or setting up the relevant
devices, and software that are not explained in this manual, please contact our
service engineer for service, or send email to [e-mail].
Returning Your Board for Service & Technical Support
If your board requires servicing, contact the dealer from whom you purchased the
product for service information. You can help assure efficient servicing of your
product by following these guidelines:
A list of your name, address, telephone, facsimile number, or email address
where you may be reached during the day
Description of you peripheral attachments
Description of your software (operating system, version, application
software, etc.) and BIOS configuration
Description of the symptoms (Extract wording any message)
For updated BIOS, drivers, manuals, or product information, please visit us at
www.fabiatech.com

iii
Table of Contents
FX5633 User’ Manual .............................................................................................................i
Chapter 1 Introducing the FX5633 System ............................................................................... 1
Overview..................................................................................................................................1
Series Comparison Table.......................................................................................................2
Layout.......................................................................................................................................3
Specifications..........................................................................................................................4
Packing List..............................................................................................................................5
Chapter 2 Hardware Installation ............................................................................................... 7
Before Installation...................................................................................................................7
Removing Covers –Installing Hardware...........................................................8
LED Indicators (On the Front Panel)...............................................................13
I/O Peripheral Connectors ..............................................................................14
Connecting the DC Power and Power Button ............................................16
Jumper Setting ..................................................................................................17
Chapter 3 BIOS Setup............................................................................................................... 19
Overview................................................................................................................................19
BIOS Functions...................................................................................................20
Keyboard Convention ..............................................................................................21
Main Setup ............................................................................................................................22
Advanced Setup..................................................................................................................23
CPU Configuration............................................................................................23
IDE Configuration..............................................................................................24
SuperIO Chipset - Configuration WIN627 Super IO Chipset.......................27
Hardware Health Configuration.....................................................................28
Advanced ACPI Settings.................................................................................29
APM Configuration...........................................................................................31
Power Management/APM..............................................................................31
USB Configuration.............................................................................................33
PCIPnP Setup.........................................................................................................................35
Boot Setup.............................................................................................................................38
Boot Setting Configuration..............................................................................39

iv
Boot Device.......................................................................................................41
Hard Disk Drives.................................................................................................42
Removable Drives.............................................................................................42
CD/DVD Disk Drives..........................................................................................43
Security setup........................................................................................................................44
Chipset Setup........................................................................................................................46
Northbridge Configuration..............................................................................47
Southbridge Configuration..............................................................................49
Chapter 4 Software Installation ............................................................................................... 51
System Driver.........................................................................................................................51
WIN 2000/2003/XP/Vista-x64 Driver .........................................................................51
VGA Driver.............................................................................................................................52
WIN 2000/2003/XP/Vista-x64 Driver .........................................................................52
Audio Driver...........................................................................................................................52
WIN 2000/2003/XP/Vista-x64 Driver .........................................................................52
LAN Driver (Intel 82573L)......................................................................................................53
WIN 2000/2003/XP/Vista-x64 Driver .........................................................................53
BIOS Flash Utility.....................................................................................................................53
Watchdog Timer...................................................................................................................54
Watchdog Timer Setting...........................................................................................55
Watchdog Timer Enabled ........................................................................................56
Watchdog Timer Trigger ...........................................................................................56
Watchdog Timer Disabled........................................................................................57
Programming RS-485............................................................................................................58
Send out one character (Transmit).........................................................................59
Send out one block data (Transmit – the data more than two characters) ...59
Receive data..............................................................................................................59
Basic Language Example.........................................................................................59
Chapter 5 Technical Reference .............................................................................................. 61
Trouble Shooting for Post Beep and Error Messages.......................................................61
Technical Reference............................................................................................................64
Physical and Environmental.....................................................................................64
Serial Ports ...................................................................................................................65
Appendix................................................................................................................................... 69

v
Dimension..............................................................................................................................69

vi

FabIATech Corporation
1
Chapter1IntroducingtheFX5633System
Overview
The FX5633 is a compact size embedded system with low-power CPU module
inside. This user’s manual provides information on the physical features, installation,
and BIOS setup of the FX5633.
Built to unleash the total potential of the Celeron-M or Core 2 Duo Processor, Able
to support 1.66GHz or 1.86GHz CPU, this system supports two 10/100/1000M Base –
TX LAN ports, 2GB DDR2-RAM, mini PCI socket for wireless LAN, six USB2.0 ports, one
expansion PCI slot and DVI, VGA, TV-out connector.
Each FX5633 has two ports for I/O communications. Two RS-232C ports are
available.
The FX5633 is perfect for ATM machines, KIOSK, point-of-sales/point-of- information,
gaming and infotainment, measurement technology, lotteries, banking and Thin
Client and small Embedded Control. The unit is only 190mm (D) X240mm (W)
X82mm (H).

FabIATech Corporation
2
SeriesComparisonTable
Model FX5633 FX5633A
Processor Celeron M 440
1.86GHz Core 2 Duo T5500 1.66GHz
N+S-Chipset QG82945GME+NH82801GBM
Memory
200 Pin-DIMM*2(Max.)
DDR2 400/533/667
2GB/4GB
Storage HDD One CF and One ATA or SATA
Watchdog Timer Yes
Multi I/O Two RS-232
USB 2.0 Six USB ports
Audio Ear-Phone/Line-In And MIC-In
RJ45 LAN port Two Intel 82573L 10/100/1000Mbps
Mini-PCI Socket One
PCI Bus Expansion One/+12V& -12V
Operating Temperature 0~+50℃(32~122℉)
Storage Temperature -20~+60℃(4~140℉)
Dimensions (Unit: mm) 190(D) x 240(W) X 82(H)

FabIATech Corporation
3
Layout
POWER
SWITCH
RESET
HDD
LIGHT
POWER
LIGHT
LAN1 LIGHT
LAN2 LIGHT
USB USB
MIC
LINE IN LINE OUT
ANTENNA DC IN
12V~24VDC IN
12V~24V
TV DVI
LAN2 LAN1
USBUSB
COM2
COM1
CRT
KB/MOUSE
PCI SLOT
TV /
ANTENNA 1
DC12~24V
+
-
2
12

FabIATech Corporation
4
Specifications
Processor Board –
Intel Low Power C-M1.86 GHz/Core2 Duo 1.66GHz CPU with 2GB DDR2-RAM.
I/O Outlets –
Two 10/100/1000 base-TX Ethernet LAN ports.
Six USB ports (2.0) and two RS-232 serial ports.
One DVI, one CRT and one TV-Out connectors.
One PS/2 compatible keyboard/mouse port.
Three audio connectors for Earphone, Line-In and Microphone-in.
One Mini PCI Socket especially for WLAN modules with Antenna fix hole.
One free PCI slot for add-on PCI card (PCI- 2.1 Specification).
One Push button reset switch.
One DC-In jack connector/terminal block with power push button switches.
LED Indicator –
One power LED, One hard disk/CF access LED, and two LAN-Access LEDs.
Storage Bay-
Compact Flash socket for Compact Flash modules or MicroDrives.
One 2.5" PATA or SATA hard disk space
Power requirement –
FX5633: +12 ~ +24V DC, 4.37A maximum (2.63A typical) with 19V input
voltage.
FX5633A: +12 ~ +24V DC, 4.56A maximum (2.75A typical) with 19V input
voltage.
Dimensions -
190mm (D) x 240mm (W) x 82mm (H)

FabIATech Corporation
5
PackingList
Upon receiving the package, verify the following things. Should any of the
mentioned happens, contact us for immediate service.
•Unpack and inspect the FX5633 package for possible damage that may
occur during the delivery process.
•Verify the accessories in the package according to the packing list and see
if there is anything missing or incorrect package is included.
•If the cable(s) you use to install the FX5633 is not supplied from us, please
make sure the specification of the cable(s) is compatible with the FX5633
system.
Note: after you install the FX5633, it is recommended that you keep the diskette or
CD that contains drivers and document files, and keep the document
copies, or unused cables in the carton for future use.
The following lists the accessories that may be included in your FX5633 package.
Some accessories are optional items that are only shipped upon order.
•One FX5633 embedded system.
•One AC to DC power adapter and 1 AC power code cable.
•One 3-end keyboard and mouse adapter cable
•One 2-pin apartable terminal block.
•One pair of wall-mounted stand with fixed screws.
•One pack of 2.5” SATA hard disk installation kit with fixed screws.
•One compact disc includes software utility.

FabIATech Corporation
6

FabIATech Corporation
7
Chapter2HardwareInstallation
This chapter introduces the system connectors & jumper settings, and guides you to
apply them for field application.
BeforeInstallation
Before you install the system, make sure you follow the following descriptions.
1. Before removing the cover, shut down the operation System and disconnect
power switch to off and unplug AC-to DC Adapter cable.
2. Install or unplug any connector, Compact Flash, and hard disk be sure that the
power is disconnected or power switch to off from the system. If not, this may
damage the system.
3. The ESD (Electricity Static Discharge) may be created from human body that
touches the board. It may do damage to the board circuit.

FabIATech Corporation
8
Removing Covers –Installing Hardware
If you are installing hardware option, you can remove the bottom cover. The
following figure will guide you how to install SATA or PATA 2.5" HDD inside,
Compact Flash modules, mini PCI WLAN module, PCI card and DDR2-RAM
module to the FX5633. (Please see the spots circled.)
¾a. Unscrew Bottom cover
M3*P0.5*4mm
654
8
9
3
2
1
10
7
a1. Remove Bottom Cover

FabIATech Corporation
9
¾b. Installing Compact Flash
¾c. Installation Hard Disk
Note: The Compact Flash socket (on the FX5633) supports 3.3V Compact Flash
and Micro Drives.

FabIATech Corporation
10
c1. Installing SATA Cable
¾d. Installing Memory: DIMM Socket For DDR2 RAM Modules
You may extend additional memory to FX5633, See as following figure and rear
pictures.The DIMM socket supports 512MB to 2GB of DDR2 RAM modules.
Note: Use caution when handling the hard disk to prevent damage to IDE
connector as you insert hard disk.
1. Be careful with the pin orientation when installing connectors and the cables. A
wrong connection can easily destroy your hard disk. CN10 is used to connect
a 2.5" HDD with 44-pin flat-cable or 44-pin DiskOnModule directly.
2. CN5 and CN7 are used to connect a SATA 2.5" HDD with included SATA
cable and CN2 is for SATA power connector. (The CN2 support +5V Voltage
only)

FabIATech Corporation
11
¾e. Installing Mini PCI Card: Mini PCI Socket for WLAN Modules
You may extend additional mini PCI WLAN module to FX5633 by removing the
bottom cover. Connect the antenna cable from backside antenna hole to Mini
PCI WLAN (the auxiliary board). (Please see the spots circled.)
e1. Add on Mini-PCI WLAN module
e2. Connect to the WLAN module and Screw Antenna

FabIATech Corporation
12
¾f. Installing Expansion PCI Card
If you are installing Expansion PCI hardware, you can remove the top side cover.
The following figure will guide you how to install PCI interface card inside the
FX5633 (The PCI Slot supports +3.3V/+5V/+12V/-12V(500mA), PCI 2.1 Spec.).
f1. Add the L-Type Metal: Screw the L-Type Metal on the PCI card Bracket
f2. Installing PCI card
f3. Screw the PCI card

FabIATech Corporation
13
f4. PCI card Limit Dimension
LED Indicators (On the Front Panel)
The Power and HDD LED’s has two distinctive statuses: Off for inactive operation
and blinking light for activity. And the 2 LED’s for LAN ports. The LAN1 and LAN2
LED’s (Green) indicate on-line/access status of LAN1 and LAN2 respectively.
POWER
SWITCH
RESET
HDD
LIGHT
POWER
LIGHT
LAN1 LIGHT
LAN2 LIGHT
USB USB
MIC
LINE IN LINE OUT
(MAX 200mm)

FabIATech Corporation
14
I/O Peripheral Connectors
View from the back side, If you are connecting the monitor, TV-out, keyboard,
mouse, LAN, audio, COM and USB to the FX5650. See following figure and a side
pictures.
ANTENNA DC IN
12V~24VDC IN
12V~24V
TV DVI
LAN2 LAN1
USBUSB
COM2
COM1
CRT
KB/MOUSE
PCI SLOT
TV /
ANTENNA 1
DC12~24V
+
-
2
12
1. DVI connector
2. Keyboard and Mouse Connector
This connect uses the included adapter cable, you can attach standard PS/2 type
keyboard and mouse.Standard PS/2 keyboard can be plugged into this connector
without any adapter cable. If PS/2 keyboard and mouse will be used
simultaneously, a Y-type (3-terminal) adapter cable is needed.
KB /Mouse Description
1 Keyboard Data
2 Mouse Data
3 Ground
4 VCC
5 Keyboard Clock
6 Mouse Clock