Fastwel VIM552 User manual

V I M 5 5 2 U s e r M a n u a l ©2015F a s t w e l V e r . 1.41
VIM552
Graphics Processor Module
User Manual
Revision 1.4
December 2015
The product described in this manual is compliant
with all related CE standards.

VIM552 Graphics Processor Module Specifications
V I M 5 5 2 U s e r M a n u a l ©2015F a s t w e l V e r . 1.42
Product Title: VIM552
Document name: VIM 552 User Manual
Manual version: 1.4
Reference document: ИМЕС.468459.005
Copyright © 2015 Fastwel Co. Ltd. All rights reserved.
Revision Record
Revision No.
Brief description of changes
Board index
Revision date
1.0
Initial version of the User Manual
VIM552
October 2012
1.1
Commercial versions are excluded
VIM552
November 2012
1.2
Modifications of mechanical characteristics
VIM552
November 2012
1.3
Adjustment were made according to PC comments
VIM552
November 2012
1.4
Compliance assessment
VIM552
December 2015
Contact Information
Fastwel Co. Ltd
Fastwel Corporation US
Address:
108 Profsoyuznaya st.,
Moscow 117437,
Russian Federation
6108 Avenida Encinas,
Suite B, Carlsbad,
CA92011, USA
Tel.:
[phone] Tel.:
[phone]
Fax:
[phone]
E-mail:
[email protected] E-mail:
[email protected]
Web:
http://www.fastwel.com/

VIM552 Graphics Processor Module Specifications
V I M 5 5 2 U s e r M a n u a l ©2015F a s t w e l V e r . 1.43
TABLE OF CONTENTS
CONTENTS……….....………………………………………………………………………………..………………....3
Trademarks..............................................................................................................................................................7
Ownership Rights..................................................................................................................................................... 7
Copyright..................................................................................................................................................................7
Safety Requirements ...............................................................................................................................................8
High Voltage Safety Rules.......................................................................................................................................8
Board Handling Instructions.....................................................................................................................................8
General Board Operation Rules...............................................................................................................................9
The Manufacturer's Guarantees ..............................................................................................................................9
a. Transportation............................................................................................................................................. 11
b. Unpacking................................................................................................................................................... 11
c. Storage....................................................................................................................................................... 11
APPLICATION NOTES AND GUIDELINES................................................................................................... 12
1. INTRODUCTION ......................................................................................................................................... 13
1.1 The Purpose of the Product........................................................................................................................ 13
2. SPECIFICATIONS ................................................................................................................................ 14
2.1. MODULE FUNCTIONALITIES.................................................................................................................... 14
2.2. GENERAL VIEW AND DIMENSIONS........................................................................................................ 15
2.3. BLOCK DIAGRAM (BOARD LAYOUT) ...................................................................................................... 16
2.4. HARDWARE VERSIONS, ORDERING INFORMATION, DELIVERY CHECKLIST ................................... 17
2.4.1. Hardware versions, ordering information................................................................................... 17
3. TECHNICAL CHARACTERISTICS ............................................................................................................ 18
3.1. POWER SUPPLY ........................................................................................................................................... 18
3.2. SOFTWARE REQUIREMENTS..................................................................................................................... 18
3.3. OPERATING CONDITIONS ........................................................................................................................... 18
3.4. MECHANICAL CHARACTERISTICS.............................................................................................................. 18
3.5. WEIGHT AND DIMENSIONS ......................................................................................................................... 19
3.6. MEAN TIME BETWEEN FAILURES (MTBF).................................................................................................. 19
4. DESCRIPTION AND OPERATION............................................................................................................. 20
4.1. DESIGNATION AND PINOUTS OF CONNECTORS ..................................................................................... 20
4.2. Switching the graphics output to RearIO......................................................................................................... 22
4.3. USB connector................................................................................................................................................ 22
ANNEX A DISCLAIMER…………………………………………………...………………………………………………………..22

VIM552 Graphics Processor Module Specifications
V I M 5 5 2 U s e r M a n u a l ©2015F a s t w e l V e r . 1.44

VIM552 Graphics Processor Module Specifications
V I M 5 5 2 U s e r M a n u a l ©2015F a s t w e l V e r . 1.45
List of Tables
Table 2-1: Module structure depending on the hardware version…………………………………………………..15
Table 3-0: Power supply………………………………………………………………………………………………....16
Table 3-1: Module weight………………………………………………………………………………………………..17
Table 4-1: Designation of XP1 and XP2 connectors…………………………………………………………………19
Table 4-1: (Continued) –Designation of XP1 and XP2 connectors………………………………………………...20
Table 4-2: Designation of XS1 connector……………………………………………………………………………...20
Table 4-3: Designation of XS5 connector……………………………………………………………………………...21

VIM552 Graphics Processor Module Specifications
V I M 5 5 2 U s e r M a n u a l ©2015F a s t w e l V e r . 1.46
List of Figures
Fig. 2-1: General view of the Module……………………………………………………………………………………14
Fig. 2-2: Module block diagram…………………………………………………………………………………………. 15
All information in this document is provided for reference only, with no warranty of its suitability for any specific purpose. This information has
been thoroughly checked and is believed to be entirely reliable and consistent with the product that it describes. However, Fastwel accepts no responsibility
for inaccuracies, omissions or their consequences, as well as liability arising from the use or application of any product or example described in this
document.
Fastwel Co. Ltd. reserves the right to change, modify, and improve this document or the products described in it, at Fastwel's discretion without
further notice. Software described in this document is provided on an “as is” basis without warranty. Fastwel assumes no liability for consequential or
incidental damages originated by the use of this software.
This document contains information, which is property of Fastwel Co. Ltd. It is not allowed to reproduce it or transmit by any means, to translate
the document or to convert it to any electronic form in full or in parts without antecedent written approval of Fastwel Co. Ltd. or one of its officially authorized
agents.
Fastwel and Fastwel logo are trademarks owned by Fastwel Co. Ltd., Moscow, Russian Federation. Ethernet is a registered trademark of Xerox
Corporation. IEEE is a registered trademark of the Institute of Electrical and Electronics Engineers Inc. Intel is a trademark of Intel Corporation. Pentium M
and Celeron M are trademarks of Intel Corporation. Microsoft is a trademark of the Microsoft corporation. In addition, this document may include names,
company logos and trademarks, which are registered trademarks and, therefore, are property of their respective owners.
Fastwel welcomes suggestions, remarks and proposals regarding the form and the content of this Manual.

VIM552 Graphics Processor Module Specifications
V I M 5 5 2 U s e r M a n u a l ©2015F a s t w e l V e r . 1.47
Trademarks
"Fastwel" logotype is a trademark belonging to Fastwel Group Co. Ltd., Moscow, Russian
Federation.
Besides, this document may contain names, corporate logotypes and trademarks being
registered trademarks; consequently, property rights to them belong to their respective legitimate
owners.
Ownership Rights
This document contains information being the property of Fastwel Group Co. Ltd. It can
neither be copied nor transferred with the utilization of known media nor be stored in data storage
and search systems without the prior written authorization of Fastwel Group Co. Ltd. To our best
knowledge, the data in this document does not contain errors. However, Fastwel Group Co. Ltd
cannot take responsibility for any inaccuracies and their consequences, as well as responsibility
arising as a result of utilization or application of any diagram, product or example cited in this
document. Fastwel Group Co. Ltd reserves the right to alter and update both this document and
the product presented therein at its own discretion without additional notification.
Copyright
This document cannot be copied, reproduced, transferred or converted to any electronic or
machine-readable form without prior written permission of Fastwel Co. Ltd

VIM552 Graphics Processor Module Specifications
V I M 5 5 2 U s e r M a n u a l ©2015F a s t w e l V e r . 1.48
Safety Requirements
This product of Fastwel Group Co. Ltd has been developed and tested with the purpose of
ensuring its compliance with electrical safety requirements. Its design provides long-term trouble-
free functioning. The product service life can be significantly shortened because of its incorrect
handling during unpacking and installation. Therefore, for your safety and ensuring of the correct
operation of the product you should adhere to the recommendations given below.
High Voltage Safety Rules
Any work with this device must be performed only by sufficiently skilled personnel.
Before installing the board into your system, make sure that the mains power supply is
disconnected. This is also true for the installation of expansion boards.
There is a serious hazard of electrocution in the process of the product installation, repair
and maintenance; therefore, always unplug the power cord during work performance. This is also
true for other power cables.
Board Handling Instructions
Electronic boards and their components are static sensitive. Therefore, special attention is
needed to ensure safety and normal operation while handling those devices.
Do not leave the board without protective package when it does not operate.
Always work with the board on static-safe workplaces if possible. If it is impossible, the
user must remove static charge from him/herself before touching the product with
his/her hands or tools. This is best done by touching a metal part of the system body.
It is especially important to observe precaution while replacing expansion boards,
jumpers, etc. Since there is a battery powering memory and real-time clock on the
board, do not put it on conductive surfaces, like antistatic carpets or sponges. They
may cause a short circuit and inflict damage to the battery and the board conductors,
as well as loss of real-time clock (RTC) data.

VIM552 Graphics Processor Module Specifications
V I M 5 5 2 U s e r M a n u a l ©2015F a s t w e l V e r . 1.49
General Board Operation Rules
To preserve the manufacturer's guarantee, the product must not be reworked or altered
in any way. Any alterations and improvements not authorized by Fastwel Group Co. Ltd
company, except those described in this Manual or obtained from the Fastwel Group
Co. Ltd technical support service in the form of a set of instructions describing their
performance cancel the guarantee.
This device must be only installed into and connected to systems meeting all
necessary technical and climatic requirements. This relates to the operating
temperatures range of the specific board design version. The temperature limitations of
the batteries installed on the board should be taken into account as well.
Please follow only the instructions of this Manual while performing all necessary
installation and configuring operations.
Keep original package to store the product in the future or to transport it in case of a
guarantee event. Should it become necessary to transport or store the board, pack it in
the same way it was packed upon receipt.
Take particular care during handling the product and its unpacking. Act in accordance
with the instructions of the above section and Chapter Transportation, Unpacking and
Storage.
The Manufacturer's Guarantees
Guarantee Liabilities
The Manufacturer hereby guarantees the product conformity with the requirements of TU
4013-004-52415667-05 specifications, provided the Consumer abides by the conditions of
operation, transportation, storage, installation and assembly established by the accompanying
documents.
The Manufacturer hereby guarantees that the products supply thereby are free from defects
in workmanship and materials, provided operation and maintenance norms were observed during
the currently established guarantee period. The Manufacturer's obligation under this guarantee is
to repair or replace free of charge any defective electronic component being a part of a returned
product.
Products that broke down through the Manufacturer's fault during the guarantee period will
be repaired free of charge. Otherwise the Consumer will be invoiced as per the current labor
remuneration rates and expendable materials cost.
Liability Limitation Right
The Manufacturer shall not be liable for the damage inflicted to the Consumer's property
because of the product breakdown in the process of its utilization.
Guarantee Period
The guarantee period for the products made by the manufacturer company is 36 months
since the sale date (unless otherwise provided by the supply contract).

VIM552 Graphics Processor Module Specifications
V I M 5 5 2 U s e r M a n u a l ©2015F a s t w e l V e r . 1.410
The guarantee period for the products made to special order is 60 months since the sale
date (unless otherwise provided by the supply contract).
The warranty set forth above does not extend to and shall not apply to:
1. Products, including software, which have been repaired or altered by other than
Fastwel personnel, unless Buyer has properly altered or repaired the products in
accordance with procedures previously approved in writing by Fastwel.
2. Products, which have been subject to power supply reversal, misuse, neglect, accident,
or improper installation.
Returning a product for repair
1. Apply to Fastwel company or to any of the Fastwel's official representatives for the
Product Return Authorization.
2. Attach a failure inspection report with a product to be returned in the form, accepted by
customer, with a description of the failure circumstances and symptoms.
3. Carefully package the product in the antistatic bag, in which the product had been
supplied. Failure to package in antistatic material will VOID all warranties. Then
package the product in a safe container for shipping.
4. The customer pays for shipping the product to Fastwel or to an official Fastwel
representative or dealer.