Fein WSG 12-70E Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
August3, 2004
WSg 12-70E
Angle Grinder / Sander

Fein Power Tools
WSg 12-70E
Item Item Number Description Reqd.
10 3-24-31-021-00-7 CABLE CLAMP 1
20 4-30-70-001-00-6 SCREW 2
30 3-24-31-040-00-6 CABLE CLAMP 1
40 3-07-62-233-99-9 ELECTRIC SPEED CONTROL 1
50 4-17-01-001-17-2 BALL BEARING 608-RS1 1
60 3-07-12-088-02-9 BRUSH HOLDER 2
70 3-07-11-132-00-3 CARBON BRUSH 2
80 4-30-70-018-00-9 SCREW 2
90 3-19-01-114-01-4 MOTOR HOUSING 1
100 5-3-273-001-11-7 ARMATURE 1
110 3-14-28-118-00-7 AIR CONDUCTING RING 1
120 3-24-16-098-00-5 COVER PLATE 1
140 4-30-70-007-00-2 SCREW 4
200 3-12-06-110-01-5 GEAR HOUSING 1
210 4-17-05-019-00-1 NEEDLE BEARING 1
220 3-09-01-032-00-3 PRESSURE SPRING 1
230 3-02-17-327-00-3 PIN 1
240 4-06-12-137-00-8 SEALING RING 1
250 3-28-05-185-00-2 THRUST BUTTON 1
260 3-24-19-115-00-6 BEARING PLATE 1
270 3-34-06-284-00-9 DRIVE SHAFT 1
280 4-17-01-010-05-4 BALL BEARING 608-RS1 1
290 3-24-16-101-00-9 COVER PLATE 1
305 3-38-09-229-01-2 BEVEL GEAR 1
320 3-26-24-117-00-9 WASHER
330 4-24-43-003-04-3 LOCKING WASHER 4
340 4-30-41-023-04-6 SCREW 4
370 6-38-01-095-00-8 INNER FLANGE 1
380 6-38-02-098-00-7 FLANGE 1
390 3-18-10-241-01-3 5" WHEEL GUARD 1
450 4-17-01-007-03-8 BALL BEARING 608-RS1 1
480 3-28-05-156-00-8 SLIDING SWITCH 1
490 5-1-273-001-11-5 FIELD COIL 1
500 4-30-70-017-00-1 SCREW 2
510 3-28-16-055-00-0 SWITCH BAR 1
520 3-28-16-052-00-4 SWITCH ROD 1
530 4-30-41-039-99-9 SCREW 2
540 3-07-01-218-00-3 SWITCH 1
550 3-12-01-101-00-8 COVER 1
560 3-14-15-082-00-4 BOLSTER 1
570 3-14-13-007-00-7 CABLE PROTECTING SLEEVE 1
585 3-07-05-035-01-3 CABLE 1
590 3-21-19-107-01-6 HANDLE 1
600 3-14-28-125-00-1 COVER 1
610 4-30-64-020-04-9 SCREW 2